Reliable computational methods can provide valuable insight into gas–solid flow processes and can be used as a design tool. Of particular interest in this study is the hydrodynamics of a binary mixture of sand–biomass in a fluidized bed. Biomass particulates vary in size, shape, and density, which inevitably alter how well the particles fluidize. Our study will use computational fluid dynamics (CFD) to interpret the hydrodynamic states of a fluidized bed by analyzing the local pressure fluctuations of beds of sand and a binary mixture of cotton stalks and sand over long time periods. Standard deviation of pressure fluctuations will be compared with experimental data to determine different fluidization regimes at inlet gas velocities ranging from two to nine times the minimum fluidization velocity. We will use Bode plots to present the pressure spectra and reveal characteristic frequencies that describe the bed hydrodynamics for different fluidization regimes. This work will present CFD as a useful tool to perform that analysis. Other important contributions include the study of pressure fluctuations of a fluidized bed in bubbling, slugging, and turbulent regimes, and the analysis of a binary mixture using CFD.
Skip Nav Destination
Article navigation
October 2013
Research-Article
A CFD Study of Pressure Fluctuations to Determine Fluidization Regimes in Gas–Solid Beds
Mirka Deza,
Mirka Deza
1
e-mail: mdeza@iastate.edu
1Corresponding author.
Search for other works by this author on:
Francine Battaglia
Francine Battaglia
Department of Mechanical Engineering,
Virginia Tech
,Blacksburg, VA 24061
Search for other works by this author on:
Mirka Deza
e-mail: mdeza@iastate.edu
Francine Battaglia
Department of Mechanical Engineering,
Virginia Tech
,Blacksburg, VA 24061
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the Journal of Fluids Engineering. Manuscript received August 27, 2012; final manuscript received May 20, 2013; published online August 6, 2013. Assoc. Editor: Michael G. Olsen.
J. Fluids Eng. Oct 2013, 135(10): 101301 (11 pages)
Published Online: August 6, 2013
Article history
Received:
August 27, 2012
Revision Received:
May 20, 2013
Citation
Deza, M., and Battaglia, F. (August 6, 2013). "A CFD Study of Pressure Fluctuations to Determine Fluidization Regimes in Gas–Solid Beds." ASME. J. Fluids Eng. October 2013; 135(10): 101301. https://doi.org/10.1115/1.4024750
Download citation file:
Get Email Alerts
Cited By
Related Articles
On the Computational Modeling of Unfluidized and Fluidized Bed Dynamics
J. Fluids Eng (October,2014)
CFD Simulation of the Bubbling and Slugging Gas-Solid Fluidized Beds
J. Fluids Eng (April,2010)
Hydrodynamic Performance of a Novel Design of Pressurized Fluidized Bed Combustor
J. Energy Resour. Technol (June,2006)
CFD Modeling and X-Ray Imaging of Biomass in a Fluidized Bed
J. Fluids Eng (November,2009)
Related Proceedings Papers
Related Chapters
CFD Simulations of a Mixed-flow Pump Using Various Turbulence Models
Mixed-flow Pumps: Modeling, Simulation, and Measurements
Multiphase Flow Simulations of Sediment Particles in Mixed-flow Pumps
Mixed-flow Pumps: Modeling, Simulation, and Measurements
Lines in the Sand
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong