An experimental investigation has been made on a turbulent boundary layer near the trailing edge on a long flat plate. The flow was controlled by an additional splitter plate fitted to the trailing edge along the wake centerline. The length of the splitter plate, $l$, was varied from a half, to five times the trailing edge thickness, $h$. Measurements of base pressure behind the trailing edge and of mean velocity and pressure distribution in the turbulent boundary layer on the flat plate were made under the freestream zero-pressure gradient. The absolute value of the base pressure coefficient of the long flat plate was considerably smaller than that of the short flat plate without the splitter plate. A significant increase in the base pressure coefficient was achieved with the splitter plate $(l∕h≧1)$, fitted to the long flat plate. Within an inner layer in the turbulent boundary layer near the trailing edge, the mean velocity increased more than that in the upstream position in the case without the splitter plate. With the splitter plate, however, the base pressure rise made the mean velocity distribution more closely approach that of a fully developed turbulent boundary layer.

1.
Tani
,
I.
, 1967,
Fluid Flows
,
Iwanami
,
Tokyo
, Chaps. 6 and 7.
2.
Bearman
,
P. W.
, and
Trueman
,
D. M.
, 1972, “
An Investigation of the Flow Around Rectangular Cylinders
,”
Aeronaut. Q.
0001-9259,
23
, pp.
229
237
.
3.
Bearman
,
P. W.
, 1965, “
Investigation of the Flow Behind a Two-Dimensional Model With a Blunt Trailing Edge and Fitted With Splitter Plates
,”
J. Fluid Mech.
0022-1120,
21
(
2
), pp.
241
255
.
4.
Apelt
,
C. J.
, and
West
,
G. S.
, 1975, “
The Effects of Wake Splitter Plates on Bluff-Body Flow in the Range 104<R<5×104. Part, 2
,”
J. Fluid Mech.
0022-1120,
71
(
1
), pp.
145
160
.
5.
Schlichting
,
H.
, 1979,
Boundary-Layer Theory
,
McGraw-Hill
,
New York
, Chaps. 23 and 25.
6.
Roshko
,
A.
, 1954, “
On the Drag and Shedding Frequency of Two-Dimensional Bluff Bodies
,” NACA Technical Note 3169, pp.
1
29
.
7.
Yao
,
Y. F.
, and
Sandham
,
N. D.
, 2002, “
Direct Numerical Simulation of Turbulent Trailing-Edge Flow With Base Flow Control
,”
AIAA J.
0001-1452,
40
(
9
), pp.
1708
1716
.
8.
Eaton
,
J. K.
, and
Johnston
,
J. P.
, 1981, “
A Review of Research on Subsonic Turbulent Flow Reattachment
,”
AIAA J.
0001-1452,
19
(
9
), pp.
1093
1100
.
9.
,
P.
, and
Wong
,
F. Y. F.
, 1972, “
The Reattachment and Relaxation of a Turbulent Shear Layer
,”
J. Fluid Mech.
0022-1120,
52
(
1
), pp.
113
135
.
10.
Nash
,
J. F.
,
Quincey
,
V. G.
, and
Callinan
,
J.
, 1963, “
Experiments on Two-Dimensional Base Flow at Subsonic and Transonic Speeds
,”
Aeronaut. Res. Council Reports and Memoranda (Great Britain)
,
3427
, pp.
1
61
.
11.
1984,
Progress in Fluid Mechanics Boundary-Layer
,
I.
Tani
, ed.,
Maruzen
,
Tokyo
, Chap. 4.
12.
Tombazis
,
N.
, and
Bearman
,
P. W.
, 1997, “
A Study of Three-Dimensional Aspects of Vortex Shedding From a Bluff-Body With a Mild Geometric Disturbance
,”
J. Fluid Mech.
0022-1120,
330
, pp.
85
112
.
13.
Schlichting
,
H.
, 1979,
Boundary-Layer Theory
,
McGraw-Hill
,
New York
, Chap. 24.
14.
Osaka
,
H.
,
Kameda
,
T.
, and
Mochizuki
,
S.
, 1998, “
Re-examination of the Reynolds-Number-Effect on the Mean Flow Quantities in a Smooth Wall Turbulent Boundary Layer
,”
JSME Int. J., Ser. B
1340-8054,
41
(
1
), pp.
123
129
.
15.
Clauser
,
F. H.
, 1956, “
The Turbulent Boundary Layer
,”
0065-2156,
4
, pp.
1
51
.
16.
Patel
,
V. C.
, 1965, “
Calibration of the Preston Tube and Limitations on its Use in Pressure Gradients
,”
J. Fluid Mech.
0022-1120,
23
(
1
), pp.
185
208
.
17.
Clauser
,
F. H.
, 1954, “
,”
J. Aeronaut. Sci.
0095-9812,
21
, pp.
91
108
.
18.
1986,
JSME Data Book: Flow Measurements
, The Japan Society of Mechanical Engineers ed.,
The Japan Society of Mechanical Engineers
,
Tokyo
, Chap. 3.
19.
Ludwieg
,
H.
, and
Tillmann
,
W.
, 1950, “
Investigations of the Wall-Shearing Stress in Turbulent Boundary Layers
,” NACA TM 1285, pp.
1
25
.