X-ray radiography was used to measure the behavior of four fuel sprays from a light-duty common-rail diesel injector. The sprays were at injection pressure and ambient pressure. Injection durations of and were tested, as were axial single-hole nozzles with hydroground and nonhydroground geometries. The X-ray data provide quantitative measurements of the internal mass distribution of the spray, including near the injector orifice. Such measurements are not possible with optical diagnostics. The sprays from the hydroground and nonhydroground nozzles appear qualitatively similar. The spray from the nonhydroground nozzle has a relatively consistent moderate width, while that from the hydroground nozzle is quite wide before transitioning into a narrow jet. The positions of the leading- and trailing-edges of the spray have also been determined, as has the amount of fuel residing in a concentrated structure near the leading edge of the spray.
Nozzle Geometry and Injection Duration Effects on Diesel Sprays Measured by X-Ray Radiography
- Views Icon Views
- Share Icon Share
- Search Site
Kastengren, A. L., Powell, C. F., Riedel, T., Cheong, S., Im, K., Liu, X., Wang, Y. J., and Wang, J. (April 4, 2008). "Nozzle Geometry and Injection Duration Effects on Diesel Sprays Measured by X-Ray Radiography." ASME. J. Fluids Eng. April 2008; 130(4): 041301. https://doi.org/10.1115/1.2903516
Download citation file: