The present study investigates turbulent boundary layer separation control by means of streamwise vortices with focus on the instantaneous vortex behavior. A turbulent boundary layer is exposed to a pressure gradient that generates a separation bubble with substantial backflow. The separation bubble is controlled by conventional passive vortex generators creating pairs of counterrotating vortices. Quantitative information is achieved by applying Particle Image Velocimetry (PIV) to the cross-stream plane of the vortices. The characteristics of a pair of counter-rotating vortices shed from a vortex generator is investigated in the near-field downstream of the vortex generator. The vortices were found to grow with the boundary layer in the downstream direction, and the maximum vorticity decreases as the circulation is conserved. The vortices are nonstationary, and the movements in the spanwise direction are larger than those in the wall-normal direction, due to the presence of the wall. The vortices fluctuate substantially and move over a spanwise distance, which is approximately equal to their size. The most probable instantaneous separation between the two vortices shed from one vortex generator equals the difference between their mean positions. The unsteadiness of the vortices contributes to the observed maxima in the Reynolds stresses around the mean vortex centers. The instantaneous vortex size and the instantaneous maximum vorticity are also fluctuating properties, and the instantaneous vortex is generally smaller and stronger than the mean vortex. A correlation was found between a large instantaneous vortex size and a low instantaneous maximum vorticity (and vice versa), suggesting that the vortices are subjected to vortex stretching.
Skip Nav Destination
Article navigation
February 2007
Technical Papers
Instantaneous Behavior of Streamwise Vortices for Turbulent Boundary Layer Separation Control
K. P. Angele,
K. P. Angele
KTH
, Mekanik, S-100 44 Stockholm, Sweden
Search for other works by this author on:
F. Grewe
F. Grewe
Hermann-Föttinger-Institut,
Strömungsmechanik Technische Universität
, 10623 Berlin, Germany
Search for other works by this author on:
K. P. Angele
KTH
, Mekanik, S-100 44 Stockholm, Sweden
F. Grewe
Hermann-Föttinger-Institut,
Strömungsmechanik Technische Universität
, 10623 Berlin, GermanyJ. Fluids Eng. Feb 2007, 129(2): 226-235 (10 pages)
Published Online: June 6, 2006
Article history
Received:
May 23, 2005
Revised:
June 6, 2006
Citation
Angele, K. P., and Grewe, F. (June 6, 2006). "Instantaneous Behavior of Streamwise Vortices for Turbulent Boundary Layer Separation Control." ASME. J. Fluids Eng. February 2007; 129(2): 226–235. https://doi.org/10.1115/1.2409327
Download citation file:
Get Email Alerts
Related Articles
Semi-circular Rods Used to Control Turbulent Boundary Layer Separation at Cylindrical Surface
J. Fluids Eng (May,2006)
Separated Flow Transition on an LP Turbine Blade With Pulsed Flow Control
J. Turbomach (April,2008)
Separation Control on Low-Pressure Turbine Airfoils Using Synthetic Vortex Generator Jets
J. Turbomach (October,2003)
Development of a Steady Vortex Generator Jet in a Turbulent Boundary Layer
J. Fluids Eng (November,2003)
Related Proceedings Papers
Related Chapters
Vortex-Induced Vibration
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Application of Homogeneous and Inhomogeneous Two-Phase Models to a Cavitating Tip Leakage Vortex on a NACA0009 Hydrofoil
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)