A Wells turbine for wave power conversion has hysteretic characteristics in a reciprocating flow. The counterclockwise hysteretic loop of the Wells turbine is opposite to the clockwise one of the well-known dynamic stall of an airfoil. In this paper, the mechanism of the hysteretic behavior was elucidated by an unsteady three-dimensional Navier-Stokes numerical simulation. It was found that the hysteretic behavior was associated with a streamwise vortical flow appearing near the blade suction surface. In the accelerating process of axial flow velocity, the vortex is intensified to enlarge the flow separation area on the blade suction surface. In the decelerating flow process, the flow separation area is reduced because of the weakened vortex. Therefore, the aerodynamic performance in the accelerating flow process is lower than in the decelerating flow process, unlike the dynamic stall. Based on the vortex theorem, the mechanism to vary the intensity of the vortex can be explained by the trailing vortices associated with the change in the blade circulation.
Mechanism of Hysteretic Characteristics of Wells Turbine for Wave Power Conversion
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division June 13, 2002; revised manuscript received October 21, 2002. Associate Editor: Y. Tsujimoto.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Kinoue , Y., Setoguchi , T., Kim , T. H., Kaneko , K., and Inoue, M. (March 27, 2003). "Mechanism of Hysteretic Characteristics of Wells Turbine for Wave Power Conversion ." ASME. J. Fluids Eng. March 2003; 125(2): 302–307. https://doi.org/10.1115/1.1538629
Download citation file:
- Ris (Zotero)
- Reference Manager