This paper presents results obtained from a combined experimental and computational study of the flow field over a multi-element aerofoil with and without an advanced slat. Detailed measurements of the mean flow and turbulent quantities over a multi-element aerofoil model in a wind tunnel have been carried out using stationary and flying hot-wire (FHW) probes. The model configuration which spans the test section is made of three parts: 1) an advanced (heel-less) slat, 2) a NACA 4412 main aerofoil and 3) a NACA 4415 flap. The chord lengths of the elements were 38, 250 and 83 mm, respectively. The results were obtained at a chord Reynolds number of and a free Mach number of less than 0.1. The variations in the flow field are explained with reference to three distinct flow field regimes: attached flow, intermittent separated flow, and separated flow. Initial comparative results are presented for the single main aerofoil and the main aerofoil with a nondeflected flap at angles of attacks of 5, 10, and 15 deg. This is followed by the results for the three-element aerofoil with emphasis on the slat performance at angles of attack 15, 20, and 25 deg. Results are discussed both for a nondeflected flap and a deflected flap The measurements presented are combined with other related aerofoil measurements to explain the main interaction of the slat/main aerofoil and main aerofoil/flap both for nondeflected and deflected flap conditions. These results are linked to numerically calculated variations in lift and drag coefficients with angle of attack and flap deflection angle.
An Investigation of Flow Fields Over Multi-Element Aerofoils
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division January 23, 2001; revised manuscript received August 27, 2001. Associate Editor: T. Gatski.
- Views Icon Views
- Share Icon Share
- Search Site
Maddah , S. R., and Bruun, H. H. (August 27, 2001). "An Investigation of Flow Fields Over Multi-Element Aerofoils ." ASME. J. Fluids Eng. March 2002; 124(1): 154–165. https://doi.org/10.1115/1.1431267
Download citation file: