Abstract

The gas-liquid cylindrical cyclone (GLCC©, The University of Tulsa, 1994) is a simple, compact, and low-cost separator, which provides an economically attractive alternative to conventional gravity-based separators over a wide range of applications. The GLCC© inlet section design is a key parameter, which is crucial for its performance and proper operation. An in-depth evaluation of specific design modifications and their effect on safety and structural robustness are carried out in this study using finite element analysis (FEA). Fluid–structure interaction (FSI) analysis is also carried out using the results of computational fluid dynamics (CFD) aimed at investigating the effect of fluid flow on the inlet section structural integrity. The selected design modifications are based on feasibility of GLCC© manufacturing and assembly for field applications. Different case studies incorporating sustained GLCC© internal pressure, dead weight loading, forces generated because of slug flow and high temperatures are analyzed and presented in this paper. The concept of holes cut out in baffle has been effective with no stresses or deformation in the baffle area. FSI simulation of slug flow has proved that FEA direct loading case studies are far more conservative.

References

1.
Shoham
,
O.
, and
Kouba
,
G. E.
,
1998
, “
State of the Art of Gas/Liquid Cylindrical-Cyclone Compact-Separator Technology
,”
J. Pet. Technol.
,
50
(7), pp.
54
61
. 10.2118/39600-jpt
2.
Kouba
,
G. E.
,
Wang
,
S.
,
Gomez
,
L. E.
,
Mohan
,
R. S.
, and
Shoham
,
O.
,
2006
, “
Review of the State-of-the-Art Gas-Liquid Cylindrical Cyclone (GLCC©) Technology—Field Applications
,”
SPE-104256-PP; Proceedings of the 2006 SPE International Oil & Gas Conference and Exhibition in China
,
Beijing
,
Dec. 5–7
.
3.
Mohan
,
R. S.
, and
Shoham
,
O.
,
1999
, “
Technologies Under Development: Design and Development of Gas-Liquid Cylindrical Cyclone Compact Separators for Three-Phase Flow
,”
Paper Presented at the 1999 Oil and Gas Conference-Technology Options for Producers’ Survival, Co-Sponsored by DOE and PTTC
,
Dallas, TX
,
June 28–30
.
4.
Mohan
,
R. S.
, and
Shoham
,
O.
,
2011
, “
Compact Multiphase Separation Technology—From the Lab to the Field
,”
Presented at 21st ITU Petroleum & Natural Gas Seminar & Exhibition
,
Istanbul
,
June 23–24
.
5.
Mohan
,
R. S.
,
Shoham
,
O.
,
Gomez
,
L. E.
, and
Wang
,
S.
,
2003
, “
Application of Gas-Liquid Cylindrical Cyclone (GLCC©) in Hydrocarbon Industry With Specific Reference to Deepwater Technology
,”
Proceedings of the 5th International Petroleum Conference and Exhibition, Petrotech 2003
,
New Delhi
,
Jan. 9–12
.
6.
Marrelli
,
J. D.
,
Rubel
,
M. T.
,
Yocum
,
B. T.
,
Dunbar
,
D. N.
,
Tallett
,
M. R.
,
Mohan
,
R. S.
,
Shoham
,
O.
,
Brahmantyo
,
A. K.
,
Montolalu
,
D.
,
Wahyudi
,
D.
, and
Solomon
,
K.
,
2000
, “
Methods for Optimal Matching Separation and Metering Facilities for Performance, Cost and Size: Practical Examples From Duri Area 10 Expansion
,”
Proceedings of ETCE/OMAE 2000 Conference of ASME Petroleum Division
,
New Orleans
,
LA
,
Feb. 14–17
.
7.
Mohan
,
R. S.
, and
Shoham
,
O.
,
2011
, “
Compact Multiphase Separation Technology—From the Lab to the Field
,”
Presented at 6th AIChE/SPE Joint Workshop on Challenges in Flow Assurance
,
Houston, TX
,
Sept. 26–28
.
8.
Kolla
,
S. S.
,
Mohan
,
R. S.
, and
Shoham
,
O.
,
2016
, “
Experimental Investigation of Liquid Carry-Over in GLCC© Separators for 3-Phase Flow
,”
IMECE2016-67457, Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition
,
Phoenix, AZ
,
Nov. 11–17
.
9.
Uphold
,
D. D.
,
Siboro
,
P. D.
, and
Kouba
,
G. E.
,
2002
, “
Field Trial of Multiphase Metering Systems in Light Oil Steam Flood Applications, Minas—Indonesia
,”
SPE 77892, SPE Asia Pacific Oil and Gas Conference and Exhibition
,
Melbourne
,
Oct. 8–10
.
10.
Putra
,
E.
, and
Uphold
,
D. D.
,
1999
, “
Multiphase Pumps for Minas Light Oil Steam Flood, Sumatra-Indonesia
,”
SPE 54294, SPE Asia Pacific Oil and Gas Conference and Exhibition
,
Jakarta
,
Apr. 20–22
.
11.
Putra
,
E.
,
2001
, “
Multiphase Pumps for Light Oil Steam Flood, From Design and Operation Perspectives
,”
SPE Asia Pacific Improved Oil Recovery Conference
,
Kuala Lumpur
,
Oct. 8–9
.
12.
Kolla
,
S. S.
,
Mohan
,
R. S.
, and
Shoham
,
O.
,
2017
, “
Structural Integrity Analysis of GLCC© Separator Inlet
,”
ASME J. Energy Resour. Technol.
,
140
(
5)
. p.
052905
. 10.1115/1.4038622
13.
Kolla
,
S. S.
,
Mohan
,
R. S.
, and
Shoham
,
O.
,
2017
, “
Computational Fluid Dynamics Study on the Effect of Inlet Modifications of GLCC© Compact Separators
,”
FEDSM2017-69413, Proceedings of the ASME 2017 Fluids Engineering Summer Conference
,
Hawaii
,
July 30–Aug. 3
.
14.
The Steel Construction Institute
,
2007
, “
Fluid-Structure Interaction Effects on and Dynamic Response of Pressure Vessels and Tanks Subjected to Dynamic Loading
,” RR527, Health and Safety Executive Research Report,
The Steel Construction Institute
,
Berks
.
15.
Kalaycioglu
,
B.
, and
Dirikolu
,
M. H.
,
2010
, “
Investigation of the Design of a Metal-Lined Fully Wrapped Composite Vessel Under High Internal Pressure
,”
High Pressure Res.
,
30
(
3
), pp.
428
437
. 10.1080/08957959.2010.504420
16.
Wu
,
Q. G.
,
Chen
,
X. D.
,
Fan
,
Z. C.
, and
Nie
,
D. F.
,
2015
, “
Stress and Damage Analyses of Composite Overwrapped Pressure Vessel
,”
14th International Conference on Pressure Vessel Technology, Procedia Engineering
,
130
, pp.
32
40
.
17.
Ziliukas
,
A.
, and
Kukis
,
M.
,
2013
, “
Pressure Vessel With Corrugated Core Numerical Strength and Experimental Analysis
,”
Mechanika
,
19
(
4
), pp.
374
379
. 10.5755/j01.mech.19.4.3204
18.
Nabhani
,
F.
,
Ladokun
,
T.
, and
Askari
,
V.
,
2012
,
Finite Element Analysis—From Biomedical Applications to Industrial Developments.
,
D.
Moratal
, ed.,
InTechOpen
,
UK
.
19.
Kozak
,
D.
,
Samardžić
,
I.
,
Stoić
,
A.
,
Ivandić
,
Ž.
, and
Damjanović
,
D.
,
2009
, “
Stress Analyses of Cylindrical Vessel with Changeable Head Geometry
,”
Sci. Bull., Ser. C
,
23
(
Part 1
).
20.
Berrio
,
J. C.
,
Pereyra
,
E.
, and
Rakovich
,
N.
,
2018
, “
Computational Fluid Dynamics Modeling of Gas-Liquid Cylindrical Cyclones, Geometrical Analysis
,”
ASME J. Energy Resour. Technol.
,
140
(
9
), p.
092003
. 10.1115/1.4039609
21.
Zhao
,
Y.
,
Feng
,
D.
,
Zhang
,
Z.
,
Sun
,
S.
,
Che
,
H.
, and
Luan
,
J.
,
2018
, “
Experimental Study on Autothermal Cyclone Air Gasification of Biomass
,”
ASME J. Energy Resour. Technol.
,
140
(
4
), p.
042001
. 10.1115/1.4038383
22.
Wilcox
,
D. C.
,
2006
,
Turbulence Modeling for CFD
, 3rd ed.,
DCW Industries, Inc.
23.
Malalasekera
,
W.
, and
Versteeg
,
H. K.
,
2007
,
An Introduction to Computational Fluid Dynamics
, 2nd ed.,
Pearson Education Limited
.
You do not currently have access to this content.