With the worldwide decline in conventional oil production, tremendous unconventional resources, such as low-permeability reservoirs, are becoming increasingly important. Cyclic water injection (CWI) as an oil recovery method has attracted increasing attention in the present environment of low oil prices. However, the optimal CWI strategy is difficult to determine for a mature oilfield due to the involvement of multiple wells with multiple operational parameters. Thus, our main focus in this paper is to present a novel and systematic approach to optimize CWI strategies by studying a typical low-permeability, namely, reservoir G21. To this end, a comprehensive method that combines the advantages of streamline simulation and fuzzy comprehensive evaluation (FCE) was proposed to identify water channeling in the reservoir. Second, the reliability of the method was verified using tracer tests. Finally, a new hybrid optimization algorithm, the simulated annealing-genetic algorithm (SAGA), coupled with a reservoir simulator was developed to determine an optimal CWI strategy for the low-permeability reservoir. The results show that the CWI technique is viable as a primary means in the present environment of low oil prices to improve the waterflood performance in low-permeability reservoirs. The oil recovery of the most efficient strategy increases by 6.8% compared to conventional waterflooding. The asymmetric CWI scheme is more efficient than the symmetric CWI scheme for the low-permeability reservoir.
Skip Nav Destination
Article navigation
January 2019
Research-Article
Optimized Cyclic Water Injection Strategy for Oil Recovery in Low-Permeability Reservoirs
Xiaofei Sun*,
Xiaofei Sun*
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Search for other works by this author on:
Yanyu Zhang,
Yanyu Zhang
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Search for other works by this author on:
Jie Wu,
Jie Wu
Downhole Service Company,
Shengli Petroleum Engineering Co., Ltd.
SINOPEC, Dongying 257000, Shandong, China
Shengli Petroleum Engineering Co., Ltd.
SINOPEC, Dongying 257000, Shandong, China
Search for other works by this author on:
Mengke Xie,
Mengke Xie
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Search for other works by this author on:
Hang Hu
Hang Hu
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Search for other works by this author on:
Xiaofei Sun*
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Yanyu Zhang
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Jie Wu
Downhole Service Company,
Shengli Petroleum Engineering Co., Ltd.
SINOPEC, Dongying 257000, Shandong, China
Shengli Petroleum Engineering Co., Ltd.
SINOPEC, Dongying 257000, Shandong, China
Mengke Xie
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Hang Hu
School of Petroleum Engineering,
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
China University of Petroleum (East China),
Qingdao 266580, Shandong, China
Contributed by the Petroleum Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received January 13, 2018; final manuscript received June 27, 2018; published online August 9, 2018. Assoc. Editor: Daoyong (Tony) Yang.
J. Energy Resour. Technol. Jan 2019, 141(1): 012905 (13 pages)
Published Online: August 9, 2018
Article history
Received:
January 13, 2018
Revised:
June 27, 2018
Citation
Sun*, X., Zhang, Y., Wu, J., Xie, M., and Hu, H. (August 9, 2018). "Optimized Cyclic Water Injection Strategy for Oil Recovery in Low-Permeability Reservoirs." ASME. J. Energy Resour. Technol. January 2019; 141(1): 012905. https://doi.org/10.1115/1.4040751
Download citation file:
Get Email Alerts
Cited By
A Semi-Analytical Approach for Calculating Productivity Index in Vertical Flowing Well: High Gas-Oil Ratio Field Data as a Case Study
J. Energy Resour. Technol (November 2022)
Multi-Objective Optimization of Lobed Enclosure for Wind Turbine Applications Using Gray Relation Analysis
J. Energy Resour. Technol (November 2022)
Temperature Response Characteristics of the Production Profile for Multilayered Gas Wells Based on Distributed Temperature Sensing Monitoring
J. Energy Resour. Technol (December 2022)
Numerical Simulation and Experimental Investigation of the Fixed Bed Gasification of Char With Focus on Pore Diffusion
J. Energy Resour. Technol (December 2022)
Related Articles
An Efficient Workflow for Production Allocation During Water Flooding
J. Energy Resour. Technol (May,2017)
Adaptability Research of Thermal–Chemical Assisted Steam Injection in Heavy Oil Reservoirs
J. Energy Resour. Technol (May,2018)
Scaling Criteria for Waterflooding and Immiscible CO 2 Flooding in Heavy Oil Reservoirs
J. Energy Resour. Technol (March,2017)
A New High-Temperature Gel for Profile Control in Heavy Oil Reservoirs
J. Energy Resour. Technol (March,2016)
Related Proceedings Papers
Related Chapters
Corrosion in Injection Systems
Corrosion and Materials in Hydrocarbon Production: A Compendium of Operational and Engineering Aspects
Advance SQL Injection to Web Applications and Single Point Perevention Layer Model
International Conference on Computer Research and Development, 5th (ICCRD 2013)
Water Chemistry
Corrosion and Materials in Hydrocarbon Production: A Compendium of Operational and Engineering Aspects