The Oriskany sandstone formation has been a prolific producer of natural gas in the Appalachian basin since 1930s. Lot of production wells have been converted to gas storage wells for the ease of operation. Natural gas storage industry is a vital part of North American energy driven economy because of the fluctuation in seasonal demand and in maintaining the reliability of supply needed to meet the demands of the consumer. However, the storage wells suffer from an annual deliverability loss of 5% owing to the various damage mechanisms. A lot of work pertaining to the issue of identification of damage mechanisms and subsequent development of stimulation technology in order to mitigate the damage and restore the wells deliverability have been done in a joint effort between The Gas Research Institute, Department of Energy, American Gas Association and the various other operator companies involved in the storage industry. Operators mostly rely on traditional methods such as blowing, washing, reperforating, acidizing, infill drilling to restore wells deliverability. These traditional methods do provide short term benefits, but the longevity is not sustained and the overall situation remains same. Hydraulic fracturing is not preferred in terms of legitimate concerns over excessive vertical height growth, long fracture fluid cleanup times, lack of expertise and cost. This research study was carried out to understand the various damage mechanisms affecting the Oriskany wells, with a focus on gas storage wells. We then developed a dataset of reservoir properties, rock properties and fracture treatment data for Oriskany based on a complete literature review and calculations from a sonic log. Parametrical studies were carried out to investigate the effect of type of fracture fluids, injection rate, types of proppant, treatment volume, reservoir pressure and treatment schedule on fracture geometries in the Oriskany formation. Based on the results, we developed new stimulation methods that lead to increased well deliverability, fracture height containment, and higher average fracture conductivity. This new understanding and knowledge help in practicing engineers design better treatments in stimulating Oriskany wells.
Skip Nav Destination
Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
University Park, PA 16802
e-mail: john.wang@psu.edu
Article navigation
June 2013
Research-Article
Fracture Height Containment in the Stimulation of Oriskany Formation
Tushar Vatsa,
Tushar Vatsa
Bechtel Corporation in Houston,
Houston, TX 77056;
Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
University Park, PA 16802
e-mail: tushar_vts@yahoo.com
Houston, TX 77056;
The Pennsylvania State University
,Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
202 Hosler Building
,University Park, PA 16802
e-mail: tushar_vts@yahoo.com
Search for other works by this author on:
John Yilin Wang
Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
University Park, PA 16802
e-mail: john.wang@psu.edu
John Yilin Wang
1
The Pennsylvania State University
,Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
202 Hosler Building
,University Park, PA 16802
e-mail: john.wang@psu.edu
1Corresponding author.
Search for other works by this author on:
Tushar Vatsa
Bechtel Corporation in Houston,
Houston, TX 77056;
Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
University Park, PA 16802
e-mail: tushar_vts@yahoo.com
Houston, TX 77056;
The Pennsylvania State University
,Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
202 Hosler Building
,University Park, PA 16802
e-mail: tushar_vts@yahoo.com
John Yilin Wang
The Pennsylvania State University
,Petroleum and Natural Gas Engineering Program,
Penn State Department of Energy and Mineral
Engineering and EMS Energy Institute,
202 Hosler Building
,University Park, PA 16802
e-mail: john.wang@psu.edu
1Corresponding author.
Contributed by the Petroleum Division of ASME for publication in the Journal of Energy Resources Technology. Manuscript received December 20, 2011; final manuscript received December 7, 2012; published online March 21, 2013. Assoc. Editor: W. David Constant.
J. Energy Resour. Technol. Jun 2013, 135(2): 022902 (12 pages)
Published Online: March 21, 2013
Article history
Received:
December 20, 2011
Revision Received:
December 7, 2012
Citation
Vatsa, T., and Yilin Wang, J. (March 21, 2013). "Fracture Height Containment in the Stimulation of Oriskany Formation." ASME. J. Energy Resour. Technol. June 2013; 135(2): 022902. https://doi.org/10.1115/1.4023169
Download citation file:
Get Email Alerts
Cited By
Stage-wise kinetic analysis of ammonia addition effects on two-stage ignition in dimethyl ether
J. Energy Resour. Technol
Related Articles
Evaluation of Fracture Asymmetry of Finite-Conductivity Fractured Wells
J. Energy Resour. Technol (March,2010)
Generalized Analytical Well-Test Solutions for Vertically Fractured Wells in Commingled Reservoirs
J. Energy Resour. Technol (May,2024)
Production Performance Evaluation of Multifractured Horizontal Wells in Shale Oil Reservoirs: An Analytical Method
J. Energy Resour. Technol (October,2019)
Type Curves Analysis for Asymmetrically Fractured Wells
J. Energy Resour. Technol (June,2014)
Related Proceedings Papers
Related Chapters
Discussion of Parameters to Be Monitored
Consensus on Operating Practices for the Sampling and Monitoring of Feedwater and Boiler Water Chemistry in Modern Industrial Boilers (CRTD-81)
PVDF/CO 3 O 4 Nanocomposites: Porosity, Crystallinity and Conductivity
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Handy Facts Regarding Types of Thermal Insulation
Hydraulics, Pipe Flow, Industrial HVAC & Utility Systems: Mister Mech Mentor, Vol. 1