A fully implicit, three-dimensional simulator with local grid refinement around the wellbore is developed to solve reservoir and horizontal well flow equations simultaneously, for single-phase liquid and gas cases. The model consists of conservation of mass and Darcy’s law in the reservoir, and mass and momentum conservation in the wellbore for isothermal conditions. Establishing the continuity of pressure and preserving mass balance at the sandface satisfy the coupling requirements. The proposed simulator is tested against and verified with the results obtained from a commercial code ECLIPSE-100™, and available public domain simulators and semi-analytical models. The proposed model can be used for multiple purposes such as well productivity prediction, transient analyses, well length optimization, completion design and optimization, and production logging interpretation. Different completion scenarios and reservoir anisotropy are simulated and their effects on the productivity of the horizontal wells are discussed. Completion cases include open-hole and partial completions. During the production logging of a horizontal well, the coil tubing reduces the wellbore cross sectional area and may cause substantial changes in the wellbore flow behavior. Depending on the well and coil tubing diameters, a significant difference between the actual production rates and the rates obtained from a production log can be observed.

Issue Section:
Technical Papers
Keywords:
well logging, optimisation, flow simulation
Topics:
Flow (Dynamics), Pressure, Reservoirs, Anisotropy, Optimization, Computer simulation, Tubing, Design, Oil well completion
1.
Daltaban, T. S., and Wall, C. G., 1998, Fundamental and Applied Pressure Analysis, Imperial College Press, London.
2.
Ozkan
,
E.
,
Sarica
,
C.
, and
Haci
,
M.
,
1999
, “
The Influence of Pressure Drop along the Wellbore on Horizontal Well Productivity
,” Soc. Pet. Eng. J., pp. 288–301 September.
3.
Vicente, R., 2000, “A Numerical Model Coupling Reservoir and Horizontal Well Flow Dynamics,” Ph.D. dissertation, The Pennsylvania State University, Dec.
4.
Vicente, R., Sarica, C., and Ertekin, T., 2000, “A Numerical Model Coupling Reservoir and Horizontal Well Flow Dynamics-Transient Behavior of Single-Phase Liquid and Gas Flows,” SPE 65508 presented at the 2000 SPE Eastern Regional meeting, Morgantown, West Virginia, 17–17 Oct.
5.
Cazenave
,
O. A.
, and
Dickstein
,
F.
,
1996
, “
On the Initial Value Problem for a Linear Model of Well-Reservoir Coupling
,”
Nonlinear World
,
pp.
567
–
587
.
6.
Pedrosa, O. A., and Aziz, K., 1985, “Use of Hybrid Grid in Reservoir Simulation,” paper SPE 13507 presented at Middle East Oil Technical Conference and Exhibition, Bahrain, Mar. 11–14.
7.
Ertekin, T., Abou-Kassem, J. H., and King, G. R., 2001, Basic Applied Reservoir Simulation, SPE Textbook Series, Richardson, TX.
8.
Vetterling, W. T., et al., 1992, Numerical Recipes, Cambridge University Press, Cambridge, England, 2nd edition.
9.
Ouyang, L. B., and Aziz, K., 1996, “General Wellbore Flow Model for Horizontal, Vertical, and Slanted Well Completions,” SPE 36608, presented at the SPE Annual Technical Conference and Exhibition, Denver, CO, USA, Oct. 6–9.
10.
Schulkes, R. M. S. M., and Utvik, O. H., 1997, “Pressure Drop in a Perforated Pipe with Radial Inflow: Single-Phase Flow,” SPE 38448, Dec.
11.
Yuan, H., Sarica, C., and Brill, J. P., 1996, “Effect of Perforation Density on Single Phase Liquid Flow Behavior in Horizontal Wells,” SPE 37109, presented at the 1996 International Conference on Horizontal Well Technology, Calgary, Alberta, Canada, Nov. 18–20.
12.
Beam, R. M., Warming, R. F., and Yee, H. C., 1981, “Stability Analysis of Numerical Boundary Conditions and Implicit Difference Approximations for Hyperbolic Equations,” presented at the 1981 symposium held at NASA Ames Research Center, Moffett Field, California, USA, Oct. 19–20.
13.
ECLIPSE 100 Reference Manual, 1992, Version 92A, Intera Information Technologies Ltd., Henley-on-Thames, UK.
14.
Goktas, B., and Ertekin, T., 1999, “Implementation of a Local Grid Refinement Technique in Modeling Slanted, Undulating Horizontal and Multi-Lateral Wells,” SPE 56624 presented at the 1999 SPE Annual Technical Conference and Exhibition, Houston, TX, Oct. 3–6.
15.
Peaceman
,
D. W.
,
1983
, “
Interpretation of Well-Block Pressures in Numerical Reservoir Simulation with Nonsquare Grid Blocks and Anisotropic Permeability
,” Soc. Pet. Eng. J., June, pp. 531–543.
16.
Peaceman, D. W., “Representation of a Horizontal Well in Numerical Reservoir Simulation,” SPE Advanced Technology Series, Vol. 1, No. 1, pp. 7–16.
17.
Ozkan, E., Sarica, C., and Haci, M., 1998, “Interpretation of Horizontal Well Production Logs: Influence of Logging Tool,” paper SPE 50395 presented at the International Conference on Horizontal Well Technology, Calgary, 1–4 Nov.
18.
Vicente, R., Sarica, C., and Ertekin, T., 2001, “An Investigation of Horizontal Well Completions Using a Two-Phase Model Coupling Reservoir and Horizontal Well Flow Dynamics,” SPE 71601 presented at the 2001 SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 30 Sep.–3 Oct.
19.
Tang U., Ozkan, E., Kelkar, M., Sarica, C., and Yildiz, T., 2000, “Performance of Horizontal Wells Completed with Slotted Liners and Perforations,” paper SPE 65516 to be presented at the International Conference on Horizontal Well Technology, Calgary, 6–8 Nov.
20.
Landman
,
M. J.
,
1994
, “
Analytical Modeling of Selectively Perforated Horizontal Wells
,”
J. Pet. Sci. Eng.
,
10
, pp.
179
–
188
.
Copyright © 2004
 by ASME
You do not currently have access to this content.