This paper presents a novel approach to designing sensors and instrumentation for monitoring and controlling multiphase processes. It is based on the use of distributed sensor arrays, embedded within vital plant components, which provides an enhanced method of monitoring multiphase phenomena in both the spatial and temporal sense. This can be of particular importance for a more efficient extraction of fossil fuels and improved energy management in manufacturing sector. Two case studies are provided. First example shows the use of the concept in the separation processes in oil and gas extraction sector, while the second relates to nylon polymerization in the chemical industry.
1.
Keska
, J. K.
, Smith
, M. D.
, and Williams
, B. E.
, 1999
, “Comparison Study of a Cluster of Four Dynamic Flow Pattern Discrimination Techniques for Multi-Phase Flow
,” Flow Meas. Instrum.
, 10
(2
), pp. 65
–77
.2.
Thorn
, R.
, Johansen
, G. A.
, and Hammer
, E. A.
, 1997
, “Recent Developments in Three-Phase Flow Measurement
,” Meas. Sci. Technol.
, 8
, pp. 691
–701
.3.
Tuss, B., Perry, D., and Shoup, G., 1996 Field Tests of the High Gas Volume Fraction Multiphase Meter, Proc. SPE Conf., vol. π, 213–220, 6–9 October, Denver, Colorado, USA.
4.
Abouelwafa
, M. S. A.
, and Kendall
, E. J. M.
, 1980
, “The Use of Capacitance Sensors for Phase Percentage Determination in Multiphase Pipelines
,” IEEE Trans. Instrum. Meas.
, IM-29
, pp. 24
–27
.5.
Williams, R. A., and Beck, M. S., 1995, Process Tomography: Principles, Techniques and Applications, Butterworth-Heinemann, Oxford.
6.
Plaskowski, A., Beck, M. S., Thorn, R., and Dyakowski, T., 1995, Imaging Industrial Flows—Applications of Electrical Process Tomography, Institute of Physics Publishing, Bristol.
7.
Rowley
, M. E.
, and Davies
, G. A.
, 1988
, “The Design of Plate Separators for the Separation of Oil-Water Dispersions
,” Chem. Eng. Res. Des.
, 66
, pp. 313
–322
.8.
Davies, G. A., Nilsen, F. P., and Gramme, P. E., 1996, “The Formation of Stable Dispersions of Crude Oil and Produced Water: The Influence of Oil Type, Wax and Asphaltene Content,” Proceedings of SPE Conference, vol. π, pp. 163–171, 6–9 October, Denver, Colorado, USA.
9.
Ming, Y., Stewart, A. C., and Davies, G. A., 1996, “Interactions Between Chemical Additives and Their Effects on Emulsion Separation,” Proceedings of SPE Conference, vol. π, pp. 453–463, 6–9 October, Denver, Colorado, USA.
10.
Miranda
, J. G.
, 1977
, “Designing Parallel-Plates Separators
,” Chemical Engineering
, 84
(3
), pp. 105
–107
.11.
Russel
, S. A.
, Robertson
, D. G.
, Lee
, J. H.
, and Ogunnaike
, B. A.
, 1998
, “Control of Product Quality for Batch Nylon 6,6 Autoclaves
,” Chem. Eng. Sci.
, 53
(21
), pp. 3685
–3702
.12.
Dyakowski
, T.
, York
, T.
, Mikos
, M.
, Vlaev
, D.
, Mann
, R.
, Follows
, G.
, Boxman
, A.
, and Wilson
, M.
, 2000
, “Imaging Nylon Polymerisation Processes by Applying Electrical Tomography
,” Chem. Eng. J.
, 77
(1–2
), pp. 105
–109
.13.
Gerngross
, T. U.
, and Slater
, S. C.
, 2000
, “How Green Are Green Plastics?
” Sci. Am.
, August, pp. 37
–41
.14.
Jaworski
, A. J.
, Dyakowski
, T.
, and Davies
, G. A.
, 1999
, “A Capacitance Probe for Interface Detection in Oil and Gas Extraction Plant
,” Meas. Sci. Technol.
, 10
, pp. L15–L20
L15–L20
.15.
Jaworski, A. J., Dyakowski, T., and Davies, G. A., 1998, “Application of Capacitance Sensors for Monitoring Oil-Water Separation Processes,” Proceedings of ASME, HTD, 361-5, pp. 429–437.
16.
Yang
, W. Q.
, 1996
, “Hardware Design of Electrical Capacitance Tomography Systems
,” Meas. Sci. Technol.
, 7
, pp. 225
–232
.Copyright © 2003
by ASME
You do not currently have access to this content.
