Results are presented from two-phase flow wax deposition tests using a state-of-the-art, high-pressure, multiphase flow test facility. Wax deposition was found to be flow pattern specific and dependent on the flow velocities of the two-phase fluids. Wax deposition occurs only along the pipe wall in contact with a waxy crude oil. An increase in mixture velocity results in harder deposits, but with a lower deposit thickness. The wax buildup trend at low mixture velocities is similar to that observed in laminar single-phase flow tests. The wax buildup trend at high mixture velocities is similar to that observed in turbulent single-phase flow tests. Thinner and harder deposits at the bottom than at the top of the pipe were observed in horizontal and near-horizontal intermittent flow tests. For annular flow tests, thicker and harder deposits were observed at low superficial liquid velocity than at high superficial liquid velocity. In stratified flow tests, no wax deposition was observed along the upper portion of the pipe.
Investigation of Paraffin Deposition During Multiphase Flow in Pipelines and Wellbores—Part 1: Experiments
Contributed by the Petroleum Division and presented at the ETCE/OMAE2000, New Orleans, Louisiana, February 14–17, 2000, of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the Petroleum Division, October 28, 1999; revised manuscript received April 9, 2002. Associate Editor: G. Kouba.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Matzain, A., Apte , M. S., Zhang , H., Volk , M., Brill , J. P., and Creek, J. L. (August 6, 2002). "Investigation of Paraffin Deposition During Multiphase Flow in Pipelines and Wellbores—Part 1: Experiments ." ASME. J. Energy Resour. Technol. September 2002; 124(3): 180–186. https://doi.org/10.1115/1.1484392
Download citation file:
- Ris (Zotero)
- Reference Manager