Mass transfer studies in oil-containing multiphase flow provide fundamental knowledge towards the understanding of hydrodynamics and the subsequent effect on corrosion in pipelines. Mass transfer coefficient measurements in two-phase (oil/ferri-ferrocyanide) and three-phase (oil/ferri-ferrocyanide/nitrogen) flow using limiting current density technique were made in 10-cm-dia pipe at 25 and 75 percent oil percentage. Mass transfer coefficients in full pipe oil/water flow and slug flow were studied. A relationship is developed between the average mass transfer coefficient in full pipe flow and slug flow. The mass transfer coefficient decreased with a decrease of in-situ water cut. This was due to the existence of oil phase, which decreased the ionic mass transfer diffusion coefficient.
Mass Transfer Coefficient Measurement in Water/Oil/Gas Multiphase Flow
Contributed by the Petroleum Division and presented at the ETCE/OMAE2000, New Orleans, Louisiana, February 14–17, 2000, of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the Petroleum Division, October 26, 1999; revised manuscript received November 10, 2000. Associate Editor: S. A. Shirazi.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Wang, H., Vedapuri , D., Cai , J. Y., Hong , T., and Jepson, W. P. (November 10, 2000). "Mass Transfer Coefficient Measurement in Water/Oil/Gas Multiphase Flow ." ASME. J. Energy Resour. Technol. June 2001; 123(2): 144–149. https://doi.org/10.1115/1.1368121
Download citation file:
- Ris (Zotero)
- Reference Manager