This paper presents an analysis of a heat pump that uses a solid desiccant dehumidifier to reduce the humidity of the ambient air that flows into the evaporator, with the purpose of decreasing frost formation on the evaporator. The heat pump is analyzed by adding a dehumidifier model to a previously developed heat pump model that includes frost formation. The dehumidifier reduces the amount of energy required for evaporator defrosting, but introduces the need for energy for regenerating the desiccant. The purpose of the analysis is to search for operating conditions and optimum dehumidifier designs for which the use of the dehumidifier results in energy savings. The results show that the use of a dehumidifier may reduce energy consumption if the energetic cost of defrosting the evaporator is high. Other benefits of dehumidification include an increase of the time intervals between defrost cycles, a better stability in the conditions in the controlled space, and the potential for increased reliability and reduced maintenance of the heat pump.

1.
Air-Conditioning and Refrigeration Institute, 1994, Standard 210/240, “Unitary Air Conditioning and Air Source Heat Pump Equipment,” Arlington, VA.
2.
Baxter, V. D., and Moyers, J. C., 1984, “Air Source Heat Pump: Field Measurement of Cycling, Frosting and Defrosting Losses, 1981–83,” ORNL/CON-150, Oak Ridge, TN, Nov.
3.
Charoensupaya
D.
, and
Worek
W. W.
,
1988
, “
Parametric Study of an Open-Cycle Adiabatic, Solid, Desiccant Coding System
,”
Energy
, Vol.
13
, No.
9
, pp.
739
747
.
4.
Devendorf, D. B., 1993, “The Control of Moisture in Food Plants,” Proceedings, 15th Annual Meeting of the International Institute of Ammonia Refrigeration, Vancouver, Canada, pp. 205–227.
5.
Eckert, E. R., and Drake, R. M. Jr., 1972, Analysis of Heat and Mass Transfer, McGraw-Hill, New York, NY.
6.
Jones
B. W.
, and
Parker
J. D.
,
1975
, “
Frost Formation With Varying Environmental Parameters
,”
ASME Journal of Heat Transfer
, Vol.
97
, p.
255
255
.
7.
Kays, W. M., and London, A. L., 1964, Compact Heat Exchangers, McGraw-Hill, New York, NY.
8.
Marti´nez-Fri´as
J.
, and
Aceves
S. M.
,
1999
, “
Effects of Evaporator Frosting on The Performance of an Air-to-Air Heat Pump
,”
ASME JOURNAL OF ENERGY RESOURCES TECHNOLOGY
, Vol.
121
, pp.
60
65
.
9.
Rice, C. K., 1991, “The ORNL Modulating Heat Pump Design Tool—User’s Guide,” Oak Ridge National Laboratory Report ORNL-CON-343, Oak Ridge, TN.
10.
Roy
D.
, and
Gidaspow
D.
,
1974
, “
Nonlinear Coupled Heat and Mass Exchange in a Cross-Flow Regenerator
,”
Chemical Engineering Science
, Vol.
29
, pp.
2101
2114
.
11.
Sanders, C. Th., 1974, “The Influence of Frost Formation and Defrosting on the Performance of Air Coolers,” Ph.D. dissertation, Technische Hogeschool, Deft, Netherlands.
12.
Satterfield, C. N., 1970, Mass Transfer in Heterogeneous Catalysis, MIT Press, Cambridge, MA.
13.
Stoecker, W. F., 1960, “Frost Formation on Refrigeration Coils,” ASHRAE Transactions, Vol. 66.
This content is only available via PDF.
You do not currently have access to this content.