Recent advances in flip chip technology such as wafer bumping, package substrate, flip chip assembly, and underfill will be presented in this study. Emphasis is placed on the latest developments of these areas in the past few years. Their future trends will also be recommended.

References

References
1.
Lau
,
J. H.
,
1996
,
Flip Chip Technologies
,
J. H.
Lau
, ed.,
McGraw-Hill
,
New York
.
2.
Lau
,
J. H.
,
2000
,
Low Cost Flip Chip Technologies
,
McGraw-Hill
,
New York
.
3.
Lau
,
J. H.
,
Wong
,
C.
,
Prince
,
J.
, and
Nakayama
,
W.
,
1998
,
Electronic Packaging
,
McGraw-Hill
,
New York
.
4.
Lau
,
J. H.
,
Lee
,
N.
,
Wong
,
C.
, and
Lee
,
R.
,
2003
,
Electronic Manufacturing
,
McGraw-Hill
,
New York
.
5.
Davis
,
E.
,
Harding
,
W.
,
Schwartz
,
R.
, and
Corning
,
J.
,
1964
, “
Solid Logic Technology: Versatile, High Performance Microelectronics
,”
IBM J. Res. Dev.
,
8
(
2
), pp.
102
114
.
6.
Totta
,
P.
, and
Sopher
,
R.
,
1969
, “
SLT Device Metallurgy and Its Monolithic Extension
,”
IBM J. Res. Dev.
,
13
(
3
), pp.
226
238
.
7.
Lau
,
J. H.
,
2016
,
3D IC Integration and Packaging
,
McGraw-Hill
,
New York
.
8.
Lau
,
J. H.
,
2013
,
Through-Silicon Vias for 3D Integration
,
McGraw-Hill
,
New York
.
9.
Lau
,
J. H.
,
2011
,
Reliability of RoHS-Compliant 2D and 3D IC Interconnects
,
McGraw-Hill
,
New York
.
10.
Lau
,
J. H.
,
Lee
,
C.
,
Premachandran
,
C.
, and
Yu
,
A.
,
2010
,
Advanced MEMS Packaging
,
McGraw-Hill
,
New York
.
11.
Lim
,
S.
,
Rao
,
V.
,
Hnin
,
W.
,
Ching
,
W.
,
Kripesh
,
V.
,
Lee
,
C.
,
Lau
,
J. H.
,
Milla
,
J.
, and
Fenner
,
A.
,
2010
, “
Process Development and Reliability of Microbumps
,”
IEEE Trans. CPMT
,
33
(
4
), pp.
747
753
.
12.
Sutanto
,
J.
,
2012
, “
POSSUMTM Die Design as a Low Cost 3D Packaging Alternative
,”
3D Packag.
,
25
, pp.
16
18
.
13.
Lau
,
J. H.
, and
Pao
,
Y.
,
1997
,
Solder Joint Reliability of BGA, CSP, and Flip Chip Assemblies
,
McGraw-Hill
,
New York
.
14.
Lau
,
J. H.
, and
Chang
,
C.
,
2000
, “
Taguchi Design of Experiment for Wafer Bumping by Stencil Printing
,”
IEEE Trans. Electron. Packag. Manuf.
,
21
(
3
), pp.
219
225
.
15.
Elenius
,
P.
,
1998
, “
Flip Chip Bumping for IC Packaging Contractors
,” NEPCON West Conference, Anaheim, CA, Mar. 3–5, pp.
1403
1407
.
16.
Elenius
,
P.
,
Leal
,
J.
,
Ney
,
J.
,
Stepniak
,
D.
, and
Yeh
,
S.
,
1999
, “
Recent Advances in Flip Chip Wafer Bumping Using Solder Paste Technology
,” IEEE 49th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, June 1–4, pp.
260
265
.
17.
Li
,
L.
,
Wiegele
,
S.
,
Thompson
,
P.
, and
Lee
,
R.
,
1998
, “
Stencil Printing Process Development for Low Cost Flip Chip Interconnect
,” IEEE 48th Electronic Components and Technology Conference (
ECTC
), Seattle, WA, May 25–28, pp.
421
426
.
18.
Wiegele
,
S.
,
Thompson
,
P.
,
Lee
,
R.
, and
Ramsland
,
E.
,
1998
, “
Reliability and Process Characterization of Electroless Nickel-Gold/Solder Flip Chip Interconnect Technology
,” 48th Electronic Components and Technology Conference (
ECTC
), Seattle, WA, May 25–28, pp.
861
866
.
19.
Kloeser
,
J.
,
Heinricht
,
K.
,
Jung
,
E.
,
Lauter
,
L.
,
Ostmann
,
A.
,
Aschenbrenner
,
R.
, and
Reichl
,
H.
,
1998
, “
Low Cost Bumping by Stencil Printing: Process Qualification for 200 mm Pitch
,”
International Symposium on Microelectronics
, San Diego, CA, Nov. 1–4, pp.
288
297
.
20.
Cho
,
M.
,
Kang
,
S.
,
Kwon
,
Y.
,
Jang
,
D.
, and
Kim
,
N.
,
1999
, “
Flip-Chip Bonding on PCB With Electroless Ni-Au and Stencil Printing Solder Bump
,”
SMTA International Conference
, San Jose, CA, Sep. 12–16, pp.
159
164
.
21.
Lau
,
J. H.
,
Chung
,
T.
,
Lee
,
R.
,
Chang
,
C.
, and
Chen
,
C.
,
1999
, “
A Novel and Reliable Wafer-Level Chip Scale Package (WLCSP)
,”
Chip Scale International Conference
, San Jose, CA, Sep. 14–15, pp.
H1
8
.
22.
Elenius
,
P.
, and
Yang
,
H.
,
1998
, “
The Ultra CSP Wafer-Scale Package
,” High Density Interconnect Conference And Expo, Tempe, AZ, Sep. 15–16, pp.
36
40
.
23.
Lau
,
J. H.
, and
Lee
,
S. W. R.
,
1999
,
Chip Scale Package
,
McGraw-Hill
,
New York
.
24.
Lau
,
J. H.
,
2015
, “
Patent Issues of Fan-Out Wafer/Panel-Level Packaging
,”
Chip Scale Rev.
,
19
(
6
), pp.
42
46
.
25.
Lau
,
J. H.
,
Fan
,
N.
, and
Li
,
M.
,
2016
, “
Design, Material, Process, and Equipment of Embedded Fan-Out Wafer/Panel-Level Packaging
,”
Chip Scale Rev.
,
20
(
3
), pp.
38
44
.
26.
Love
,
D.
,
Moresco
,
L.
,
Chou
,
W.
,
Horine
,
D.
,
Wong
,
C.
, and
Eilin
,
S.
,
1994
, “
Wire Interconnect Structures for Connecting an Integrated Circuit to a Substrate
,” U.S. Patent No. 5,334,804, filed Nov. 17, 1992 and issued Aug. 2, 1994.
27.
Tung
,
F.
,
2003
, “
Pillar Connections for Semiconductor Chips and Method of Manufacture
,” U.S. Patent No. 6,578,754, filed Apr. 27, 2000 and issued June 17, 2003.
28.
Tung
,
F.
,
2004
, “
Pillar Connections for Semiconductor Chips and Method of Manufacture
,” U.S. Patent No. 6,681,982, filed June 12, 2002 and issued Jan. 27, 2004.
29.
Cappo
,
F.
,
Milliken
,
J.
, and
Mosley
,
J.
,
1991
, “
Highly Manufacturable Multi-Layered Ceramic Surface Mounted Package
,”
11th IEEE/CHMT International Electronic Manufacturing Technology Symposium
(
IEMT
), San Francisco, CA, Sep. 16–18, pp.
424
428
.
30.
Banks
,
D.
,
Burnette
,
T.
,
Gerke
,
R.
,
Mammo
,
E.
, and
Mattay
,
S.
,
1994
, “
Reliability Comparison of Two Metallurgies for Ceramic Ball Grid Array
,”
International Conference and Exhibition on Multichip Modules
(
ICMCM
), Denver, CO, Apr. 13–15, pp.
529
534
.
31.
Sigliano
,
R.
, and
Gaughan
,
K.
,
1992
, “
Ceramic Material Options for MCM's
,”
1st International Conference on Multichip Modules
(
ISHM/IEPS
), Denver, CO, Apr. 1–3, pp.
291
299
.
32.
Sigliano
,
R.
,
1995
, “
Ceramic Substrates for Ball Grid Array Packages
,”
Ball Grid Array Technology
,
J. H.
Lau
, ed.,
McGraw-Hill
,
New York
, pp.
65
92
.
33.
Lau
,
J. H.
, and
Dauksher
,
W.
,
2005
, “
Reliability of an 1657CCGA (Ceramic Column Grid Array) Package With 96.5Sn3.9Ag0.6Cu Lead-Free Solder Paste on PCBs (Printed Circuit Boards)
,”
ASME J. Electron. Packag.
,
127
(
2
), pp.
96
105
.
34.
Lau
,
J. H.
,
Castello
,
T.
,
Shangguan
,
D.
,
Dauksher
,
W.
,
Smetana
,
J.
,
Horsley
,
R.
,
Love
,
D.
,
Menis
,
I.
, and
Sullivan
,
B.
,
2007
, “
Failure Analysis of Lead-Free Solder Joints of an 1657CCGA (Ceramic Column Grid Array) Package
,”
IMAPS Trans., J. Microelectron. Electron. Packag.
,
4
(
3
), pp.
189
213
.
35.
Tsukada
,
Y.
,
Tsuchida
,
S.
, and
Mashimoto
,
Y.
,
1992
, “
Surface Laminar Circuit Packaging
,”
42nd IEEE Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 18–20, pp.
22
27
.
36.
Tsukada
,
Y.
, and
Tsuchida
,
S.
,
1992
, “
Surface Laminar Circuit, a Low Cost High Density Printed Circuit Board
,”
Surface Mount International Conference
, San Jose, CA, Aug. 27–29, pp.
537
542
.
37.
Tsukada
,
Y.
,
1994
, “
Solder Bumped Flip Chip Attach on SLC Board and Multichip Module
,”
Chip on Board Technologies for Multichip Modules
,
J. H.
Lau
, ed.,
Van Nostrand Reinhold
,
New York
, pp.
410
443
.
38.
Lau
,
J. H.
, and
Lee
,
S. W. R.
,
2001
,
Microvias for Low Cost, High Density Interconnects
,
McGraw-Hill
,
New York
.
39.
Selvanayagam
,
C.
,
Lau
,
J. H.
,
Zhang
,
X.
,
Seah
,
S.
,
Vaidyanathan
,
K.
, and
Chai
,
T.
,
2009
, “
Nonlinear Thermal Stress/Strain Analyses of Copper Filled TSV (Through Silicon Via) and Their Flip-Chip Microbumps
,”
IEEE Trans. Adv. Packag.
,
32
(
4
), pp.
720
728
.
40.
Yu
,
A.
,
Khan
,
N.
,
Archit
,
G.
,
Pinjala
,
D.
,
Toh
,
K.
,
Kripesh
,
V.
,
Yoon
,
S.
, and
Lau
,
J. H.
,
2009
, “
Fabrication of Silicon Carriers With TSV Electrical Interconnections and Embedded Thermal Solutions for High Power 3-D Packages
,”
IEEE Trans. CPMT
,
32
(
3
), pp.
566
571
.
41.
Chai
,
T.
,
Zhang
,
C.
,
Lau
,
J. H.
,
Selvanayagam
,
C.
,
Pinjala
,
D.
,
Hoe
,
Y.
,
Ong
,
Y.
,
Rao
,
V.
,
Wai
,
E.
,
Li
,
H.
,
Liao
,
E.
,
Ranganathan
,
N.
,
Kripesh
,
V.
,
Liu
,
S.
,
Sun
,
J.
,
Ravi
,
M.
,
Vath
,
C.
, and
Tsutsumi
,
Y.
,
2011
, “
Development of Large Die Fine-Pitch Cu/Low-k FCBGA Package With Through Silicon Via (TSV) Interposer
,”
IEEE Trans. CPMT
,
1
(
5
), pp.
660
672
.
42.
Yu
,
A.
,
Lau
,
J. H.
,
Ho
,
S.
,
Kumar
,
A.
,
Hnin
,
W.
,
Lee
,
W.
,
Jong
,
M.
,
Sekhar
,
V.
,
Kripesh
,
V.
,
Pinjala
,
D.
,
Chen
,
S.
,
Chan
,
C.
,
Chao
,
C.
,
Chiu
,
C.
,
Huang
,
C.
, and
Chen
,
C.
,
2011
, “
Fabrication of High Aspect Ratio TSV and Assembly With Fine-Pitch Low-Cost Solder Microbump for Si Interposer Technology With High-Density Interconnects
,”
IEEE Trans. CPMT
,
1
(
9
), pp.
1336
1344
.
43.
Lau
,
J. H.
,
2011
, “
Overview and Outlook of TSV and 3D Integrations
,”
J. Microelectron. Int.
,
28
(
2
), pp.
8
22
.
44.
Lau
,
J. H.
, and
Tang
,
G. Y.
,
2012
, “
Effects of TSVs (Through-Silicon Vias) on Thermal Performances of 3D IC Integration System-In-Package (SiP)
,”
J. Microelectron. Reliab.
,
52
(
11
), pp.
2660
2669
.
45.
Lau
,
J. H.
,
2014
, “
Overview and Outlook of Three-Dimensional Integrated Circuit Packaging, Three-Dimensional Si Integration, and Three-Dimensional Integrated Circuit Integration
,”
ASME J. Electron. Packag.
,
136
(
4
), p.
040801
.
46.
Lau
,
J. H.
,
2014
, “
The Future of Interposer for Semiconductor IC Packaging
,”
Chip Scale Rev.
,
18
(
1
), pp.
32
36
.
47.
Lau
,
J. H.
,
Lee
,
S.
,
Yuen
,
M.
,
Wu
,
J.
,
Lo
,
J.
,
Fan
,
H.
, and
Chen
,
H.
,
2013
, “
Apparatus Having Thermal-Enhanced and Cost-Effective 3D IC Integration Structure With Through Silicon Via Interposer
,” U.S. Patent No. 8,604,603, filed Feb. 29, 2010 and issued Dec. 10, 2013.
48.
Banijamali
,
B.
,
Ramalingam
,
S.
,
Nagarajan
,
K.
, and
Chaware
,
R.
,
2011
, “
Advanced Reliability Study of TSV Interposers and Interconnects for the 28nm Technology FPGA
,”
IEEE Electronic and Components Technology Conference
(
ECTC
), Lake Buena Vista, FL, May 31–June 3, pp.
285
290
.
49.
Chaware
,
R.
,
Nagarajan
,
K.
, and
Ramalingam
,
S.
,
2012
, “
Assembly and Reliability Challenges in 3D Integration of 28nm FPGA Die on a Large High Density 65nm Passive Interposer
,”
62nd IEEE Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 29–June 1, pp.
279
283
.
50.
Banijamali
,
B.
,
Chiu
,
C.
,
Hsieh
,
C.
,
Lin
,
T.
,
Hu
,
C.
,
Hou
,
S.
,
Ramalingam
,
S.
,
Jeng
,
S.
,
Madden
,
L.
, and
Yu
,
D.
,
2013
, “
Reliability Evaluation of a CoWoS-Enabled 3D IC Package
,” IEEE 63rd Electronic Components and Technology Conference (
ECTC
), Las Vegas, NV, May 28–31, pp.
35
40
.
51.
Xie
,
J.
,
Shi
,
H.
,
Li
,
Y.
,
Li
,
Z.
,
Rahman
,
A.
,
Chandrasekar
,
K.
,
Ratakonda
,
D.
,
Deo
,
M.
,
Chanda
,
K.
,
Hool
,
V.
,
Lee
,
M.
,
Vodrahalli
,
N.
,
Ibbotson
,
D.
, and
Verma
,
T.
,
2012
, “
Enabling the 2.5D Integration
,”
45th IMAPS International Symposium on Microelectronics
(IMAPS 2012), San Diego, CA, Sep. 9–13, pp.
254
267
.
52.
Kwon
,
W.
,
Ramalingam
,
S.
,
Wu
,
X.
,
Madden
,
L.
,
Huang
,
C.
,
Chang
,
H.
,
Chiu
,
C.
,
Chiu
,
S.
, and
Chen
,
S.
,
2014
, “
Cost Effective and High Performance 28nm FPGA With New Disruptive Silicon-Less Interconnect Technology (SLIT)
,”
International Symposium on Microelectronics
(
IMAPS 2014
), San Diego, CA, Oct. 13–16, pp.
599
605
.
53.
Lau
,
J. H.
,
Tzeng
,
P.
,
Lee
,
C.
,
Zhan
,
C.
,
Li
,
M.
,
Cline
,
J.
,
Saito
,
K.
,
Hsin
,
Y.
,
Chang
,
P.
,
Chang
,
Y.
,
Chen
,
J.
,
Chen
,
S.
,
Wu
,
C.
,
Chang
,
H.
,
Chien
,
C.
,
Lin
,
C.
,
Ku
,
T.
,
Lo
,
R.
, and
Kao
,
M.
,
2014
, “
Redistribution Layers (RDLs) for 2.5D/3D IC Integration
,”
IMAPS Trans., J. Microelectron. Packag.
,
11
(
1
), pp.
16
24
.
54.
Liang
,
F.
,
Chang
,
H.
,
Tseng
,
W.
,
Lai
,
J.
,
Cheng
,
S.
,
Ma
,
M.
,
Ramalingam
,
S.
,
Wu
,
X.
, and
Gandhi
,
J.
,
2016
, “
Development of Non-TSV Interposer (NTI) for High Electrical Performance Package
,”
66th IEEE Electronic and Components Technology Conference
(ECTC), Las Vegas, NV, May 31–June 3, pp.
31
36
.
55.
Hiner
,
D.
,
Kelly
,
M.
,
Huemoeller
,
R.
, and
Reed
,
R.
,
2015
, “
Silicon Interposer-Less Integrated Module—SLIM
,”
11th International Conference and Exhibition on Device Packaging
, Scottsdale, AZ, Mar. 17–19.
56.
Lin
,
Y.
,
Lai
,
W.
,
Kao
,
C.
,
Lou
,
J.
,
Yang
,
P.
,
Wang
,
C.
, and
Hsieh
,
C.
,
2016
, “
Wafer Warpage Experiments and Simulation for Fan-Out Chip on Substrate (FOCoS)
,” IEEE 66th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, May 31–June 3, pp.
13
18
.
57.
Chiu
,
C.
,
Qian
,
Z.
, and
Manusharow
,
M.
,
2014
, “
Bridge Interconnect With Air Gap in Package Assembly
,” U.S. Patent Application No. 8,872,349, filed Sep. 11, 2012 and issued Oct. 28, 2014.
58.
Wu
,
S.
,
Lau
,
J. H.
,
Chien
,
H.
,
Tain
,
R.
,
Dai
,
M.
, and
Chao
,
Y.
,
2013
, “
Chip Stacking Structure and Fabricating Method of the Chip Stacking Structure
,” U.S. Patent No. 8,519,524, filed Aug. 16, 2012 and issued Aug. 27, 2013.
59.
Lau
,
J. H.
,
Lee
,
C.-K.
,
Zhan
,
C.-J.
,
Wu
,
S.-T.
,
Chao
,
Y.-L.
,
Dai
,
M.-J.
,
Tain
,
R.-M.
,
Chien
,
H.-C.
,
Hung
,
J.-F.
,
Chien
,
C.-H.
,
Cheng
,
R.-S.
,
Huang
,
Y.-W.
,
Cheng
,
Y.-M.
,
Liao
,
L.-L.
,
Lo
,
W.-C.
, and
Kao
,
M.-J.
,
2014
, “
Through-Silicon Hole Interposers for 3D IC Integration
,”
IEEE Trans. CPMT
,
4
(
9
), pp.
1407
1419
.
60.
Shimizu
,
N.
,
Kaneda
,
W.
,
Arisaka
,
H.
,
Koizumi
,
N.
,
Sunohara
,
S.
,
Rokugawa
,
A.
, and
Koyama
,
T.
,
2013
, “
Development of Organic Multi Chip Package for High Performance Application
,”
IMAPS International Symposium on Microelectronics
(
IMAPS 2013
), Orlando, FL, Sep. 30–Oct. 3, pp.
414
419
.
61.
Oi
,
K.
,
Otake
,
S.
,
Shimizu
,
N.
,
Watanabe
,
S.
,
Kunimoto
,
Y.
,
Kurihara
,
T.
,
Koyama
,
T.
,
Tanaka
,
M.
,
Aryasomayajula
,
L.
, and
Kutlu
,
Z.
,
2014
, “
Development of New 2.5D Package With Novel Integrated Organic Interposer Substrate With Ultra-Fine Wiring and High Density Bumps
,”
IEEE 64th Electronic and Components Technology Conference
(
ECTC
), Orlando, FL, May 27–30, pp.
348
353
.
62.
Koide
,
M.
,
Fukuzono
,
K.
,
Yoshimura
,
H.
,
Sato
,
T.
,
Abe
,
K.
, and
Fujisaki
,
H.
,
2006
, “
High-Performance Flip-Chip BGA Technology Based on Thin-Core and Coreless Package Substrate
,”
IEEE 56th Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 30–June 2, pp.
1869
1873
.
63.
Sung
,
R.
,
Chiang
,
K.
,
Wang
,
Y.
, and
Hsiao
,
C.
,
2007
, “
Comparative Analysis of Electrical Performance on Coreless and Standard Flip-Chip Substrate
,”
IEEE 57th Electronic and Components Technology Conference
(
ECTC
), Reno, NV, May 29–June 1, pp.
1921
1924
.
64.
Lin
,
E.
,
Chang
,
D.
,
Jiang
,
D.
,
Wang
,
Y.
, and
Hsiao
,
C.
,
2007
, “
Advantage and Challenge of Coreless Flip-Chip BGA
,” International Microsystems, Packaging, Assembly and Circuits Technology (
IMPACT
), Taipei, Taiwan, Oct. 1–3, pp.
346
349
.
65.
Chang
,
D.
,
Wang
,
Y.
, and
Hsiao
,
C.
,
2007
, “
High Performance Coreless Flip-Chip BGA Packaging Technology
,”
IEEE 57th Electronic and Components Technology Conference
(
ECTC
), Reno, NV, May 29-June 1, pp.
1765
1768
.
66.
Savic
,
J.
,
Aria
,
P.
,
Priest
,
J.
,
Dugbartey
,
N.
,
Pomerleau
,
R.
,
Shanker
,
B.
,
Nagar
,
M.
,
Lim
,
J.
,
Teng
,
S.
,
Li
,
L.
, and
Xue
,
J.
,
2009
, “
Electrical Performance Assessment of Advanced Substrate Technologies for High Speed Networking Applications
,”
IEEE 59th Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 26–29, pp.
1193
1199
.
67.
Kurashina
,
M.
,
Mizutani
,
D.
,
Koide
,
M.
, and
Itoh
,
N.
,
2009
, “
Precision Improvement Study of Thermal Warpage Prediction Technology for LSI Packages
,”
IEEE 59th Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 26–29, pp.
529
534
.
68.
Wang
,
J.
,
Ding
,
Y.
,
Liao
,
L.
,
Yang
,
P.
,
Lai
,
Y.
, and
Tseng
,
A.
,
2010
, “
Coreless Substrate for High Performance Flip Chip Packaging
,”
IEEE 11th International Conference on Electronic Packaging Technology and High Density Packaging
(
ICEPT-HDP
), Xi'an, China, Aug. 16–19, pp.
819
823
.
69.
Kimura
,
M.
,
2011
, “
Shinko Officially Announces Volume Production of Coreless Substrate
,”
Nikkei Electronics
, epub.
70.
Fujimoto
,
D.
,
Yamada
,
K.
,
Ogawa
,
N.
,
Murai
,
H.
,
Fukai
,
H.
,
Kaneko
,
Y.
, and
Kato
,
M.
,
2011
, “
New Fine Line Fabrication Technology on Glass-Cloth Prepreg Without Insulating Films for PKG Substrate
,”
IEEE 61st Electronic and Components Technology Conference
(
ECTC
), Lake Buena Vista, FL, May 31–June 3, pp.
387
391
.
71.
Kim
,
G.
,
Lee
,
S.
,
Yu
,
J.
,
Jung
,
G.
,
Kim
,
J.
,
Karim
,
N.
,
Yoo
,
H.
, and
Lee
,
C.
,
2011
, “
Advanced Coreless Flip-Chip BGA Package With High Dielectric Constant Thin Film Embedded Decoupling Capacitor
,”
IEEE 61st Electronic and Components Technology Conference
(
ECTC
), Lake Buena Vista, FL, May 31–June 3, pp.
595
600
.
72.
Nickerson
,
R.
,
Olmedo
,
R.
,
Mortensen
,
R.
,
Chee
,
C.
,
Goyal
,
S.
,
Low
,
A.
, and
Gealer
,
C.
,
2012
, “
Application of Coreless Substrate to Package on Package Architectures
,”
IEEE 62nd Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 29–June 1, pp.
1368
1371
.
73.
Kim
,
G.
,
Yu
,
J.
,
Park
,
C.
,
Hong
,
S.
,
Kim
,
J.
,
Rinne
,
G.
, and
Lee
,
C.
,
2012
, “
Evaluation and Verification of Enhanced Electrical Performance of Advanced Coreless Flip-Chip BGA Package With Warpage Measurement Data
,”
IEEE 62nd Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 29–June 1, pp.
897
903
.
74.
Nishitani
,
Y.
,
2012
, “
Coreless Packaging Technology for High-Performance Application
,”
IEEE/ECT/CMPT Seminar on Advanced Coreless Package Substrate and Material Technologies
, 62nd Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 29–June 1.
75.
Kurashina
,
M.
,
Mizutani
,
D.
,
Koide
,
M.
,
Watanabe
,
M.
,
Fukuzono
,
K.
, and
Suzuki
,
H.
,
2012
, “
Low Warpage Coreless Substrate for Large-Size LSI Packages
,”
IEEE 62nd Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 29–June 1, pp.
1378
1383
.
76.
Kurashina
,
M.
,
Mizutani
,
D.
,
Koide
,
M.
,
Watanabe
,
M.
,
Fukuzono
,
K.
,
Itoh
,
N.
, and
Suzuki
,
H.
,
2012
, “
Low Warpage Coreless Substrate for IC Packages
,”
Trans. Jpn. Inst. Electron. Packag.
,
5
(
1
), pp.
55
62
.
77.
Manusharow
,
M.
,
Muthukumar
,
S.
,
Zheng
,
E.
,
Sadiq
,
A.
, and
Lee
,
C.
,
2012
, “
Coreless Substrate Technology Investigation for Ultra-Thin CPU BGA Packaging
,”
IEEE 62nd Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 29–June 1, pp.
892
896
.
78.
Kim
,
J.
,
Lee
,
S.
,
Lee
,
J.
,
Jung
,
S.
, and
Ryu
,
C.
,
2012
, “
Warpage Issues and Assembly Challenges Using Coreless Package Substrate
,”
IPC APEX Expo
, San Diego, CA, Feb. 28–Mar. 1.
79.
Sakuma
,
K.
,
Blackshear
,
E.
,
Tunga
,
K.
,
Lian
,
C.
,
Li
,
S.
,
Interrante
,
M.
,
Mantilla
,
O.
, and
Nah
,
J.
,
2013
, “
Flip Chip Assembly Method Employing Differential Heating/Cooling for Large Dies With Coreless Substrates
,”
IEEE 63rd Electronic and Components Technology Conference
(
ECTC
), Las Vegas, NV, May 28–31, pp.
667
673
.
80.
Hahm
,
Y.
,
Li
,
M.
,
Yan
,
J.
,
Tretiakov
,
Y.
,
Lan
,
H.
,
Chen
,
S.
, and
Wong
,
S.
,
2016
, “
Analysis and Measurement of Power Integrity and Jitter Impacts on Thin-Core and Coreless Packages
,” IEEE 66th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, May 31–June 3, pp.
387
392
.
81.
Baloglu
,
B.
,
Lin
,
W.
,
Stratton
,
K.
,
Jimarez
,
M.
, and
Brady
,
D.
,
2013
, “
Warpage Characterization and Improvements for IC Packages With Coreless Substrate
,”
46th International Symposium on Microelectronics
(
IMAPS
), Orlando, FL, Sept. 30–Oct. 3, pp.
260
284
.
82.
Sun
,
Y.
,
He
,
X.
,
Yu
,
Z.
, and
Wan
,
L.
,
2013
, “
Development of Ultra-Thin Low Warpage Coreless Substrate
,”
IEEE 63rd Electronic and Components Technology Conference
(
ECTC
), Las Vegas, NV, May 28–31, pp.
1846
1849
.
83.
Lin
,
W.
,
Baloglu
,
B.
, and
Stratton
,
K.
,
2014
, “
Coreless Substrate With Asymmetric Design to Improve Package Warpage
,”
IEEE 64th Electronic and Components Technology Conference
(
ECTC
), Orlando, FL, May 27–30, pp.
1401
1406
.
84.
Liu
,
W.
,
Xiaa
,
G.
,
Liang
,
T.
,
Li
,
T.
,
Wang
,
X.
,
Xie
,
J.
,
Chen
,
S.
, and
Yu
,
D.
,
2015
, “
Development of High Yield, Reliable Fine Pitch Flip Chip Interconnects With Copper Pillar Bumps and Thin Coreless Substrate
,”
IEEE 65th Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 26–29, pp.
1713
1717
.
85.
Pendse
,
R.
,
Kim
,
K.
,
Kim
,
K.
,
Kim
,
O.
, and
Lee
,
K.
,
2006
, “
Bond-On-Lead: A Novel Flip Chip Interconnection Technology for Fine Effective Pitch and High I/O Density
,”
IEEE 56th Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 30–June 2, pp.
16
23
.
86.
Pendse
,
R.
,
2008
, “
Bump-On-Lead Flip Chip Interconnection
,” U.S. Patent No. 7,368,817, filed Nov. 10, 2004 and issued May 6, 2008.
87.
Ouyang
,
E.
,
Chae
,
M.
,
Chow
,
S.
,
Emigh
,
R.
,
Joshi
,
M.
,
Martin
,
R.
, and
Pendse
,
R.
,
2010
, “
Improvement of ELK Reliability in Flip Chip Packages Using Bond-On-Lead (BOL) Interconnect Structure
,”
IMAPS 43rd International Symposium on Microelectronics
(
IMAPS
), Raleigh, NC, Oct. 31–Nov. 4, pp.
197
203
.
88.
Pendse
,
R.
,
2011
, “
Bump-On-Lead Flip Chip Interconnection
,” U.S. Patent No. 7,901,983, filed May 26, 2009 and issued Mar. 8, 2011.
89.
Pendse
,
R.
,
Cho
,
C.
,
Joshi
,
M.
,
Kim
,
K.
,
Kim
,
P.
,
Kim
,
S.
,
Kim
,
S.
,
Lee
,
H.
,
Lee
,
K.
,
Martin
,
R.
,
Murphy
,
A.
,
Pandey
,
V.
, and
Palar
,
C.
,
2010
, “
Low Cost Flip Chip (LCFC): An Innovative Approach for Breakthrough Reduction in Flip Chip Package Cost
,” IEEE 60th Electronic Components and Technology Conference (
ECTC
), Las Vegas, NV, June 1–4.
90.
Movva
,
S.
,
Bezuk
,
S.
,
Bchir
,
O.
,
Shah
,
M.
,
Joshi
,
M.
,
Pendse
,
R.
,
Ouyang
,
E.
,
Kim
,
Y.
,
Park
,
S.
,
Lee
,
H.
,
Kim
,
S.
,
Bae
,
H.
,
Na
,
G.
, and
Lee
,
K.
,
2011
, “
CuBOL (Cu-Column on BOL) Technology: A Low Cost Flip Chip Solution Scalable to High I/O Density, Fine Bump Pitch and Advanced Si-Nodes
,”
IEEE 61st Electronic and Components Technology Conference
(
ECTC
), Lake Buena Vista, FL, May 31–June 3, pp.
601
607
.
91.
Lan
,
A.
,
Hsiao
,
C.
,
Lau
,
J. H.
,
So
,
E.
, and
Ma
,
B.
,
2012
, “
Cu Pillar Exposed-Die Molded FCCSP for Mobile Devices
,”
IEEE 62nd Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 29–June 1, pp.
886
891
.
92.
Kuo
,
F.
,
Lee
,
J.
,
Chien
,
F.
,
Lee
,
R.
,
Mao
,
C.
, and
Lau
,
J. H.
,
2014
, “
Electromigration Performance of Cu Pillar Bump for Flip Chip Packaging With Bump on Trace by Using Thermal Compression Bonding
,”
IEEE 64th Electronic and Components Technology Conference
(
ECTC
), Orlando, FL, May 27–30, pp.
56
61
.
93.
Li
,
M.
,
Tian
,
D.
,
Cheung
,
Y.
,
Yang
,
L.
, and
Lau
,
J. H.
,
2015
, “
A High Throughput and Reliable Thermal Compression Bonding Process for Advanced Interconnections
,” IEEE 65th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26–29, pp.
603
608
.
94.
Liu
,
F.
,
Nair
,
C.
,
Sundaram
,
V.
, and
Tummala
,
R.
,
2015
, “
Advances in Embedded Traces for 1.5 μm RDL on 2.5D Glass Interposers
,”
IEEE 65th Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 26–29, pp.
1736
1741
.
95.
Chen
,
C.
,
Lin
,
M.
,
Liao
,
G.
,
Ding
,
Y.
, and
Cheng
,
W.
,
2015
, “
Balanced Embedded Trace Substrate Design for Warpage Control
,”
IEEE 65th Electronic and Components Technology Conference
(
ECTC
), San Diego, CA, May 26–29, pp.
193
199
.
96.
Zhang
,
L.
, and
Joseph
,
G.
,
2015
, “
Low Cost High Performance Bare Die PoP With Embedded Trace Coreless Technology and ‘Coreless Cored’ Build Up Substrate Manufacture Process
,”
IEEE 65th Electronic Components and Technology Conference
(
ECTC
), San Diego, CA, May 26–29, pp.
882
887
.
97.
Lu
,
M.
,
2014
, “
Challenges and Opportunities in Advanced IC Packaging
,”
Chip Scale Rev.
,
18
(
2
), pp.
5
8
.
98.
Lee
,
K.
,
Cha
,
S.
, and
Shim
,
P.
,
2016
, “
Form Factor and Cost Driven Advanced Package Substrates for Mobile and IoT Applications
,” China Semiconductor Technology International Conference (
CSTIC
), Shanghai, China, Mar. 13–14.
99.
Chen
,
K.
,
Lee
,
S.
,
Andry
,
P.
,
Tsang
,
C.
,
Topop
,
A.
,
Lin
,
Y.
,
Lu
,
Y. J.
,
Young
,
A.
,
Ieong
,
M.
, and
Haensch
,
W.
,
2006
, “
Structure, Design, and Process Control for Cu Bonded Interconnects in 3D Integrated Circuits
,”
IEEE International Electron Devices Meeting
(
IEDM
), San Francisco, CA, Dec. 11–13, pp.
367
370
.
100.
Liu
,
F.
,
Yu
,
R.
,
Young
,
A.
,
Doyle
,
J.
,
Wang
,
X.
,
Shi
,
L.
,
Chen
,
K.
,
Li
,
X.
,
Dipaola
,
D.
,
Brown
,
D.
,
Ryan
,
C.
,
Hagan
,
J.
,
Wong
,
K.
,
Lu
,
M.
,
Gu
,
X.
,
Klymko
,
N.
,
Perfecto
,
E.
,
Merryman
,
A.
,
Kelly
,
K.
,
Purushothaman
,
S.
,
Koester
,
S.
,
Wisnieff
,
R.
, and
Haensch
,
W.
,
2008
, “
A 300-mm Wafer-Level Three-Dimensional Integration Scheme Using Tungsten Through-Silicon Via and Hybrid Cu-Adhesive Bonding
,”
IEEE International Electron Devices Meeting
(
IEDM
), San Francisco, CA, Dec. 15–17.
101.
Yu
,
R.
,
Liu
,
F.
,
Polastre
,
R.
,
Chen
,
K.
,
Liu
,
X.
,
Shi
,
L.
,
Perfecto
,
E.
,
Klymko
,
N.
,
Chace
,
M.
,
Shaw
,
T.
,
Dimilia
,
D.
,
Kinser
,
E.
,
Young
,
A.
,
Purushothaman
,
S.
,
Koester
,
S.
, and
Haensch
,
W.
,
2009
, “
Reliability of a 300-mm-Compatible 3DI Technology Based on Hybrid Cu-Adhesive Wafer Bonding
,”
Symposium on VLSI Technology
, Honolulu, HI, June 16–18, pp.
170
171
.
102.
Shigetou
,
A.
,
Itoh
,
T.
,
Sawada
,
K.
, and
Suga
,
T.
,
2008
, “
Bumpless Interconnect of 6-μm Pitch Cu Electrodes at Room Temperature
,”
2008 58th Electronic Components and Technology Conference
, Lake Buena Vista, FL, May 27–30, pp.
1405
1409
.
103.
Tsukamoto
,
K.
,
Higurashi
,
E.
, and
Suga
,
T.
,
2010
, “
Evaluation of Surface Microroughness for Surface Activated Bonding
,”
IEEE CPMT Symposium Japan
, Tokyo, Japan, Aug. 24-26, pp.
1
4
.
104.
Kondou
,
R.
,
Wang
,
C.
, and
Suga
,
T.
,
2010
, “
Room-Temperature Si-Si and Si-SiN Wafer Bonding
,”
IEEE CPMT Symposium Japan
, Tokyo, Japan, Aug. 24–26, pp.
161
164
.
105.
Shigetou
,
A.
,
Itoh
,
T.
,
Matsuo
,
M.
,
Hayasaka
,
N.
,
Okumura
,
K.
, and
Suga
,
T.
,
2006
, “
Bumpless Interconnect Through Ultrafine Cu Electrodes by Means of Surface-Activated Bonding (SAB) Method
,”
IEEE Trans. Adv. Packag.
,
29
(
2
), pp.
218
226
.
106.
Wang
,
C.
, and
Suga
,
T.
,
2009
, “
A Novel Moiré Fringe Assisted Method for Nanoprecision Alignment in Wafer Bonding
,”
IEEE 59th Electronic Components and Technology Conference
(
ECTC
), San Diego, CA, May 26–29, pp.
872
878
.
107.
Wang
,
C.
, and
Suga
,
T.
,
2009
, “
Moiré Method for Nanoprecision Wafer-To-Wafer Alignment: Theory, Simulation, and Application
,”
IEEE International Conference on Electronic Packaging Technology and High-Density Packaging
(
ICEPT-HDP '09
), Beijing, China, Aug. 10–13, pp.
219
224
.
108.
Higurashi
,
E.
,
Chino
,
D.
,
Suga
,
T.
, and
Sawada
,
R.
,
2009
, “
Au-Au Surface-Activated Bonding and Its Application to Optical Microsensors With 3-D Structure
,”
IEEE J. Sel. Top. Quantum Electron.
,
15
(
5
), pp.
1500
1505
.
109.
Eitan
,
A.
, and
Jing
,
K.
,
2015
, “
Thermo-Compression Bonding for Fine-Pitch Copper-Pillar Flip Chip Interconnect—Tool Features as Enablers of Unique Technology
,” IEEE 65th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26–29, pp.
460
464
.
110.
Lau
,
J. H.
, and
Chang
,
C.
,
2002
, “
Characteristics and Reliability of Fast-Flow, Snap-Cure, and Reworkable Underfills for Solder Bumped Flip Chip on Low-Cost Substrates
,”
IEEE Trans. Electron. Packag. Manuf.
,
25
(
3
), pp.
231
230
.
111.
Lau
,
J. H.
, and
Lee
,
R.
,
2000
, “
Fracture Mechanics Analysis of Low Cost Solder Bumped Flip Chip Assemblies With Imperfect Underfills
,”
ASME J. Electron. Packag.
,
222
(
4
), pp.
306
310
.
112.
Lau
,
J. H.
,
Lee
,
R.
, and
Chang
,
C.
,
2000
, “
Effects of Underfill Material Properties on the Reliability of Solder Bumped Flip Chip on Board With Imperfect Underfill Encapsulants
,”
IEEE Trans. CPMT
,
23
(
2
), pp.
323
333
.
113.
Lau
,
J. H.
, and
Lee
,
S. W.
,
2000
, “
Effects of Underfill Delamination and Chip Size on the Reliability of Solder Bumped Flip Chip on Board
,”
IMAPS Trans. Int. J. Microcircuit Electron. Packag.
,
23
(
1
), pp.
33
39
.
114.
Lau
,
J. H.
,
Chang
,
C.
, and
Chen
,
C.
,
1999
, “
Characteristics and Reliability of No-Flow Underfills for Solder Bumped Flip Chip Assemblies
,”
IMAPS Trans. Int. J. Microcircuit Electron. Packag.
,
22
(
4
), pp.
370
381
.
115.
Lau
,
J. H.
, and
Chang
,
C.
,
1999
, “
How to Select Underfill Materials for Solder Bumped Flip Chips on Low Cost Substrates?
,”
IMAPS Trans. Int. J. Microelectron. Electron. Packag.
,
22
(
1
), pp.
20
28
.
116.
Lau
,
J. H.
, and
Chang
,
C.
,
1999
, “
Characterization of Underfill Materials for Functional Solder Bumped Flip Chips on Board Applications
,”
IEEE Trans. CPMT, Part A
,
22
(
1
), pp.
111
119
.
117.
Lau
,
J. H.
,
Chang
,
C.
, and
Ouyang
,
C.
,
1998
, “
SMT Compatible No-Flow Underfill for Solder Bumped Flip Chip on Low-Cost Substrates
,”
J. Electron. Manuf.
,
8
(
3–4
), pp.
151
164
.
118.
Lau
,
J. H.
,
Chang
,
C.
, and
Chen
,
R.
,
1997
, “
Effects of Underfill Encapsulant on the Mechanical and Electrical Performance of a Functional Flip Chip Device
,”
J. Electron. Manuf.
,
7
(
4
), pp.
269
277
.
119.
Lau
,
J. H.
, and
Wun
,
B.
,
1995
, “
Characterization and Evaluation of the Underfill Encapsulants for Flip Chip Assembly
,”
J. Inst. Interconnect. Technol.
,
21
(
1
), pp.
25
27
.
120.
Lau
,
J. H.
,
Schneider
,
E.
, and
Baker
,
T.
,
1996
, “
Shock and Vibration of Solder Bumped Flip Chip on Organic Coated Copper Boards
,”
ASME J. Electron. Packag.
,
118
(
2
), pp.
101
104
.
121.
Lau
,
J. H.
,
1998
, “
Flip Chip on PCBs With Anisotropic Conductive Film
,”
Advanced Packaging
, July/Aug., pp.
44
48
.
122.
Lau
,
J. H.
,
Chang
,
C.
, and
Lee
,
R.
,
2000
, “
Failure Analysis of Solder Bumped Flip Chip on Low-Cost Substrates
,”
IEEE Trans. Electron. Packag. Manuf.
,
23
(
1
), pp.
19
27
.
123.
Lau
,
J. H.
,
Lee
,
R.
,
Pan
,
S.
, and
Chang
,
C.
,
2002
, “
Nonlinear Time-Dependent Analysis of Micro Via-In-Pad Substrates for Solder Bumped Flip Chip Applications
,”
ASME J. Electron. Packag.
,
124
(
3
), pp.
205
211
.
124.
Lau
,
J. H.
,
Zhang
,
Q.
,
Li
,
M.
,
Yeung
,
K.
,
Cheung
,
Y.
,
Fan
,
N.
,
Wong
,
Y.
,
Zahn
,
M.
, and
Koh
,
M.
,
2015
, “
Stencil Printing of Underfill for Flip Chips on Organic-Panel and Si-Wafer Assemblies
,” IEEE 65th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26–29, pp.
168
174
.
125.
Nakano
,
F.
,
Soga
,
T.
, and
Amagi
,
S.
,
1987
, “
Resin-Insertion Effect on Thermal Cycle Resistivity of Flip-Chip Mounted LSI Devices
,”
ISHM International Symposium on Microelectronics
, Minneapolis, MN, Sep. 28–30, pp.
536
541
.
126.
Lau
,
J. H.
,
Krulevitch
,
T.
,
Schar
,
W.
,
Heydinger
,
M.
,
Erasmus
,
S.
, and
Gleason
,
J.
,
1993
, “
Experimental and Analytical Studies of Encapsulated Flip Chip Solder Bumps on Surface Laminar Circuit Boards
,”
Circuit World
,
19
(
3
), pp.
18
24
.
127.
Wun
,
B.
, and
Lau
,
J. H.
,
1995
, “
Characterization and Evaluation of the Underfill Encapsulants for Flip Chip Assembly
,”
Circuit World
,
21
(
3
), pp.
25
32
.
128.
Lai
,
Y. M.
,
Chee
,
C. K.
,
Then
,
E.
,
Ng
,
C. H.
, and
Low
,
M. F.
,
2007
, “
Capillary Underfill and Mold Encapsulation Method and Apparatus
,” U.S. Patent No. 7,262,077, filed Sep. 30, 2003 and issued Aug. 28, 2007.
129.
Cremaldi
,
J.
,
Gaynes
,
M.
,
Brofman
,
P.
,
Pesika
,
N.
, and
Lewandowski
,
E.
,
2014
, “
Time, Temperature, and Mechanical Fatigue Dependence on Underfill Adhesion
,” IEEE 64th Electronic Components and Technology Conference (
ECTC
), Orlando, FL, May 27–30, pp.
255
262
.
130.
Gilleo
,
K.
,
Cotterman
,
B.
, and
Chen
,
I. A.
,
2000
, “
Molded Underfill for Flip Chip in Package
,”
Proceedings of High Density Interconnects
, pp.
28
31
.
131.
Rector
,
L. P.
,
Gong
,
S.
,
Miles
,
T. R.
, and
Gaffney
,
K.
,
2000
, “
Transfer Molding Encapsulation of Flip Chip Array Packages
,”
Int. J. Microcircuits Electron. Packag.
,
23
(
4
), pp.
401
406
.
132.
Lee
,
J. Y.
,
Oh
,
K. S.
,
Hwang
,
C. H.
,
Lee
,
C. H.
, and
Amand
,
R. D. S.
,
2009
, “
Molded Underfill Development for FlipStack CSP
,” IEEE 59th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26-29, pp.
954
959
.
133.
Joshi
,
M.
,
Pendse
,
R.
,
Pandey
,
V.
,
Lee
,
T. K.
,
Yoon
,
I. S.
,
Yun
,
J. S.
,
Kim
,
Y. C.
, and
Lee
,
H. R.
,
2010
, “
Molded Underfill (MUF) Technology for Flip Chip Packages in Mobile Applications
,” IEEE 60th Electronic Components and Technology Conference (
ECTC
), Las Vegas, NV, June 1–4, pp.
1250
1257
.
134.
Ferrandon
,
C.
,
Jouve
,
A.
,
Joblot
,
S.
,
Lamy
,
Y.
,
Schreiner
,
A.
,
Montmeat
,
P.
,
Pellat
,
M.
,
Argoud
,
M.
,
Fournel
,
F.
,
Simon
,
G.
, and
Cheramy
,
S.
,
2013
, “
Innovative Wafer-Level Encapsulation and Underfill Material for Silicon Interposer Application
,” IEEE 63rd Electronic Components and Technology Conference (
ECTC
), Las Vegas, NV, May 28–31, pp.
761
767
.
135.
Lau
,
J. H.
,
Zhang
,
Q.
,
Li
,
M.
,
Yeung
,
K.
,
Cheung
,
Y.
,
Fan
,
N.
,
Wong
,
Y.
,
Zahn
,
M.
, and
Koh
,
M.
,
2015
, “
Stencil Printing of Underfill for Flip Chips on Organic-Panel and Si-Wafer Substrates
,”
IEEE Trans. CPMT
,
5
(
7
), pp.
1027
1035
.
136.
Wong
,
C. P.
,
Baldwin
,
D.
,
Vincent
,
M. B.
,
Fennell
,
B.
,
Wang
,
L. J.
, and
Shi
,
S. H.
,
1998
, “
Characterization of a No-Flow Underfill Encapsulant During the Solder Reflow Process
,” IEEE 48th Electronic Components and Technology Conference (
ECTC
), Seattle, WA, May 25–28, pp.
1253
1259
.
137.
Lee
,
M.
,
Yoo
,
M.
,
Cho
,
J.
,
Lee
,
S.
,
Kim
,
J.
,
Lee
,
C.
,
Kang
,
D.
,
Zwenger
,
C.
, and
Lanzone
,
R.
,
2009
, “
Study of Interconnection Process for Fine Pitch Flip Chip
,” IEEE 48th Electronic Components and Technology Conference (
ECTC
), Seattle, WA, May 25–28, pp.
720
723
.
138.
Okayama
,
Y.
,
Nakasato
,
M.
,
Saitou
,
K.
,
Yanase
,
Y.
,
Kobayashi
,
H.
,
Yamamoto
,
T.
,
Usui
,
R.
, and
Inoue
,
Y.
,
2010
, “
Fine Pitch Connection and Thermal Stress Analysis of a Novel Wafer Level Packaging Technology Using Laminating Process
,” IEEE 60th Electronic Components and Technology Conference (
ECTC
), Las Vegas, NV, June 1–4, pp.
287
292
.
139.
Honda
,
K.
,
Enomoto
,
T.
,
Nagai
,
A.
, and
Takano
,
N.
,
2010
, “
NCF for Wafer Lamination Process in Higher Density Electronic Packages
,” IEEE 60th Electronic Components and Technology Conference (
ECTC
), Las Vegas, NV, June 1–4, pp.
1853
1860
.
140.
Honda
,
K.
,
Nagai
,
A.
,
Satou
,
M.
,
Hagiwara
,
S.
,
Tuchida
,
S.
, and
Abe
,
H.
,
2012
, “
NCF for Pre-Applied Process in Higher Density Electronic Package Including 3D-Package
,” IEEE 62nd Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 29–June 1, pp.
385
392
.
141.
Fukushima
,
T.
,
Ohara
,
Y.
,
Bea
,
J.
,
Murugesan
,
M.
,
Lee
,
K.-W.
,
Tanaka
,
T.
, and
Koyanagi
,
M.
,
2012
, “
Non-Conductive Film and Compression Molding Technology for Self-Assembly-Based 3D Integration
,” IEEE 62nd Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 29–June 1, pp.
385
392
.
142.
Ito
,
Y.
,
Murugesan
,
M.
,
Kino
,
H.
,
Fukushima
,
T.
,
Lee
,
K.
,
Choki
,
K.
,
Tanaka
,
T.
, and
Koyanagi
,
M.
,
2015
, “
Development of Highly-Reliable Microbump Bonding Technology Using Self-Assembly of NCF-Covered KGDs and Multi-Layer 3D Stacking Challenges
,” IEEE 65th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26–29, pp.
336
341
.
143.
Choubey
,
A.
,
Anzures
,
E.
,
Fleming
,
D.
,
Dhoble
,
A.
,
Herong
,
L.
,
Barr
,
R.
,
Calvert
,
J.
, and
Oh
,
J.
,
2014
, “
Non-Conductive Film (NCF) Underfill for Flip Chip Assembly and High Reliability
,”
International Wafer Level Packaging Conference
(
IWLPC
), San Jose, CA, Nov. 11–13.
144.
Lee
,
D.
,
Kim
,
K.
,
Kim
,
K.
,
Kim
,
H.
,
Kim
,
J.
,
Park
,
Y.
,
Kim
,
J.
,
Kim
,
D.
,
Park
,
H.
,
Shin
,
J.
,
Cho
,
J.
,
Kwon
,
K.
,
Kim
,
M.
,
Lee
,
J.
,
Park
,
K.
,
Chung
,
B.
, and
Hong
,
S.
,
2014
, “
A 1.2V 8Gb 8-Channel 128GB/s High-Bandwidth Memory (HBM) Stacked DRAM With Effective Microbump I/O Test Methods Using 29nm Process and TSV
,” IEEE International Solid-State Circuits Conference Digest of Technical Papers (
ISSCC
), San Francisco, CA, Feb. 9–13, pp.
433
435
.
145.
Shin
,
J.
,
Kim
,
Y.
,
Lee
,
H.
,
Kang
,
U.
,
Seo
,
S.
, and
Paik
,
K.
,
2015
, “
Effects of Thermo-Compression Bonding Parameters on Joint Formation of Micro-Bumps in Non-Conductive Film (NCF)
,” IEEE 65th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26–29, pp.
910
915
.
146.
Lee
,
H.
,
Choi
,
Y.
,
Shin
,
J.
, and
Paik
,
K.
,
2015
, “
Wafer Level Packages (WLPs) Using B-Stage Non-Conductive Films (NCFs) for Highly Reliable 3D-TSV Micro-Bump Interconnection
,” IEEE 65th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26–29, pp.
331
335
.
147.
Hiner
,
D.
,
Kim
,
D.
,
Ahn
,
S.
,
Kim
,
K.
,
Kim
,
H.
,
Lee
,
M.
,
Kang
,
D.
,
Kelly
,
M.
,
Huemoeller
,
R.
,
Radojcic
,
R.
, and
Gu
,
S.
,
2015
, “
Multi-Die Chip on Wafer Thermo-Compression Bonding Using Non-Conductive Film
,” IEEE 65th Electronic Components and Technology Conference (
ECTC
), San Diego, CA, May 26–29, pp.
17
21
.
148.
Nonaka
,
T.
,
Kobayashi
,
Y.
,
Asahi
,
N.
,
Niizeki
,
S.
, and
Fujimaru
,
K.
,
2014
, “
High Throughput Thermal Compression NCF Bonding
,” IEEE 64th Electronic Components and Technology Conference (
ECTC
), Orlando, FL, May 27–30, pp.
913
918
.
149.
Matsumura
,
K.
,
Tomikawa
,
M.
,
Sakabe
,
Y.
, and
Shiba
,
Y.
,
2015
, “
New Non Conductive Film for High Productivity Process
,”
IEEE CPMT Symposium Japan
(
ICSJ
), Kyoto, Japan, Nov. 9–11, pp.
19
20
.
150.
Asahi
,
N.
,
Miyamoto
,
Y.
,
Nimura
,
M.
,
Mizutani
,
Y.
, and
Arai
,
Y.
,
2015
, “
High Productivity Thermal Compression Bonding for 3D-IC
,”
IEEE International 3D Systems Integration Conference
(
3DIC
), Sendai, Japan, Aug. 31–Sep. 2, pp.
TS7.3.1
TS7.3.5
.
You do not currently have access to this content.