Electronic products are subjected to high G-levels during mechanical shock and vibration. Failure-modes include solder-joint failures, pad cratering, chip-cracking, copper trace fracture, and underfill fillet failures. The second-level interconnects may be experience high strain rates and accrue damage during repetitive exposure to mechanical shock. Industry migration to lead-free solders has resulted in proliferation of a wide variety of solder alloy compositions. One of the popular tin-silver-copper alloys is Sn3Ag0.5Cu. The high strain rate properties of lead-free solder alloys are scarce. Typical material tests systems are not well suited for measurement of high strain rates typical of mechanical shock. Previously, high strain rates techniques such as the split Hopkinson pressure bar (SHPB) can be used for strain rates of 1000 s−1. However, measurement of materials at strain rates of 1–100 s−1 which are typical of mechanical shock is difficult to address. In this paper, a new test-technique developed by the authors has been presented for measurement of material constitutive behavior. The instrument enables attaining strain rates in the neighborhood of 1–100 s−1. High-speed cameras operating at 300,000 fps have been used in conjunction with digital image correlation (DIC) for the measurement of full-field strain during the test. Constancy of crosshead velocity has been demonstrated during the test from the unloaded state to the specimen failure. Solder alloy constitutive behavior has been measured for SAC305 solder. Constitutive model has been fit to the material data. Samples have been tested at various time under thermal aging at 25 °C and 125 °C. The constitutive model has been embedded into an explicit finite element framework for the purpose of life-prediction of lead-free interconnects. Test assemblies has been fabricated and tested under Joint Electron Device Engineering Council (JEDEC) JESD22-B111 specified condition for mechanical shock. Model predictions have been correlated with experimental data.

References

References
1.
Che
,
F. X.
,
Luan
,
J. E.
, and
Baraton
,
X.
,
2008
, “
Effect of Silver Content and Nickel Dopant on Mechanical Properties of Sn-Ag-Based Solders
,”
58th Electronic Components and Technology Conference
(
ECTC 2008
),
Orlando, FL
, May 27–30, pp.
485
490
.10.1109/ECTC.2008.4550016
2.
Kim
,
H.
,
Zhang
,
M.
,
Kumar
,
C.
,
Liu
,
P.
,
Kim
,
D.
,
Xie
,
M.
, and
Wang
,
Z.
,
2007
, “
Improved Drop Reliability Performance With Lead Free Solders of Low Ag Content and Their Failure Modes
,”
57th Electronic Components and Technology Conference
(
ECTC '07
),
Reno, NV
, May 29–June 1, pp.
962
967
.10.1109/ECTC.2007.373913
3.
Lim
,
P. M., K. T.
, and
Seah
,
S. K. W.
,
2003
, “
Tackling the Drop Impact Reliability of Electronic Packaging
,”
ASME
Paper No. IPACK2003-35101.10.1115/IPACK2003-35101
4.
Pandher
,
R.
, and
Healey
,
R.
,
2008
, “
Reliability of Pb-Free Solder Alloys in Demanding BGA and CSP Applications, Electronic Systems
,”
58th Electronic Component & Technology Conference
(
ECTC 2008
),
Orlando, FL
, May 27–30, pp.
2018
2023
.10.1109/ECTC.2008.4550261
5.
Pandher
,
R.
,
Lewis
,
Brian.
,
Vangaveti
,
R.
, and
Singh
,
B.
,
2007
, “
Drop Shock Reliability of Lead-Free Alloys—Effect of Micro-Additives
,”
57th Electronic Components and Technology Conference
(
ECTC '07
),
Reno, NV
, May 29–June 1, pp.
669
676
.10.1109/ECTC.2007.373868
6.
Yang
,
W.
,
Messler
,
R.
, and
Felton
,
L. E.
,
1994
, “
Microstructure Evolution of Eutectic Sn-Ag Solder Joints
,”
J. Electron. Mater.
,
23
(
8
), pp.
765
772
.10.1007/BF02651371
7.
Chan
,
D.
,
Nie
,
X.
,
Bhate
,
C.
,
Subbarayan
,
G.
, and
Dutta
,
I.
,
2009
, “
High Strain Rate Behavior of Sn3.8Ag0.7Cu Solder Alloys and Its Influence on the Fracture Location Within Solder Joints
,”
ASME
Paper No. InterPACK2009-89404.10.1115/InterPACK2009-89404
8.
Siviour
,
C. R.
,
Walley
,
S. M.
,
Proud
,
W. G.
, and
Field
,
J. E.
,
2005
, “
Mechanical Properties of SnPb and Lead-Free Solder at High Rates of Strain
,”
J. Phys. D: Appl. Phys.
,
38
(
22
), pp.
4131
4139
.10.1088/0022-3727/38/22/018
9.
Wong
,
E. H.
,
Selvanayagam
,
C. S.
,
Seah
,
S. K. W.
,
Driel
,
W. D.
,
Caers
,
J. F. J. M.
,
Zhao
,
X. J.
,
Owens
,
N.
,
Tan
,
L. C.
,
Frear
,
D. R.
,
Leoni
,
M.
,
Lai
,
Y. S.
, and
Yeh
,
C.-L.
,
2008
, “
Stress–Strain Characteristics of Tin-Based Solder Alloys at Medium Strain Rate
,”
Mater. Lett.
,
62
(
17–18
), pp.
3031
3034
.10.1016/j.matlet.2008.01.101
10.
Meier
,
K.
,
Roelling
,
M.
,
Wiese
,
S.
, and
Wolter
,
K.
,
2010
, “
Mechanical Solder Characterisation Under High Strain Rate Conditions
,”
AIP Conf. Proc.
,
1300
, pp.
166
175
.10.1063/1.3527124
11.
Darveaux
,
R.
,
2005
, “
Shear Deformation of Lead Free Solder Joints
,”
55th Electronic Components and Technology Conference
(
ECTC
), Lake Buena Vista, FL, May 31–June 3, pp.
882
893
.10.1109/ECTC.2005.1441377
12.
Ding
,
Y.
,
Wang
,
C.
,
Tian
,
Y.
, and
Li
,
M.
,
2007
, “
Influence of Aging on Deformation Behavior of 96.5Sn3.5Ag Lead Free Solder Alloy During In Situ Tensile Tests
,”
J. Alloys Compd.
,
428
(1–2), pp.
274
285
.10.1016/j.jallcom.2006.02.069
13.
Hsuan
,
T. C.
, and
Lin
,
K. L.
,
2007
, “
Effects of Aging Treatment of Mechanical Properties and Microstructure of Sn-8.5Zn-0.5Ag-0.01Al-0.1Ga Solder
,”
Mater. Sci. Eng., A
,
456
(
1–2
), pp.
202
209
.10.1016/j.msea.2006.11.144
14.
Pang
,
J. H. L.
,
Xiong
,
B. S.
, and
Low
,
T. H.
,
2004
, “
Low Cycle Fatigue Models for Lead-Free Solders
,”
Thin Solid Films
,
462-463
, pp.
408
412
.10.1016/j.tsf.2004.05.037
15.
Xiao
,
Q.
,
Nguyen
,
L.
, and
Armstrong
,
W. D.
,
2004
, “
Aging and Creep Behavior of Sn3.9Ag0.6Cu Solder Alloy
,”
54th Electronic Components and Technology Conference
(
ECTC
), Las Vegas, NV, June 1–4, pp.
1325
1332
.10.1109/ECTC.2004.1320284
16.
Chuang
,
C. M.
,
Liu
,
T. S.
, and
Chen
,
L. H.
,
2002
, “
Effect of Aluminum Addition on Tensile Properties of Naturally Aged Sn-9Zn Eutectic Solder
,”
J. Mater. Sci.
,
37
(
1
), pp.
191
195
.10.1023/A:1013143218738
17.
Coyle
,
R. J.
,
Solan
,
P. P.
,
Serafino
,
A. J.
, and
Gahr
,
S. A.
,
2000
, “
The Influence of Room Temperature Aging on Ball Shear Strength and Microstructure of Area Array Solder Balls
,”
50th Electronic Components and Technology Conference
(
ECTC
), Las Vegas, NV, May 21–24, pp.
160
169
.10.1109/ECTC.2000.853140
18.
Lee
,
S. W.
,
Tsui
,
Y. K.
,
Huang
,
X.
, and
Yan
,
C. C.
,
2002
, “
Effects of Room Temperature Storage Time on the Shear Strength of PBGA Solder Balls
,”
ASME
Paper No. IMECE2002-39514. 10.1115/IMECE2002-39514
19.
Tsui
,
Y. K.
,
Lee
,
S. W.
, and
Huang
,
X.
,
2002
, “
Experimental Investigation on the Degradation of BGA Solder Ball Shear Strength Due to Room Temperature Aging
,”
4th International Symposium on Electronic Materials and Packaging
(
EMAP
), Kaohsiung, Taiwan, Dec. 4–6, pp.
478
481
.10.1109/EMAP.2002.1188886
20.
Zhang
,
Y.
,
Cai
,
Z.
,
Suhling
,
J. C.
,
Lall
,
P.
, and
Bozack
,
M.
,
2009
, “
Aging Effects in SAC Solder Joints
,”
SEM Annual Conference
,
Albuquerque, NM
, June 1–4.
21.
Lall
,
P.
,
Shantaram
,
S.
, and
Panchagade
,
D.
,
2010
, “
Peridynamic-Models Using Finite Elements for Shock and Vibration Reliability of Lead-free Electronics
,”
12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
(
ITHERM 2010
),
Las Vegas, NV
, June 2–5.10.1109/ITHERM.2010.5501274
22.
Lall
,
P.
,
Kulkarni
,
M.
,
Angral
,
A.
,
Panchagade
,
D.
, and
Suhling
,
J.
,
2010
, “
Digital-Image Correlation and XFEM Based Shock-Reliability Models for Lead-free and Advanced Interconnects
,”
60th Electronic Component and Technology Conference
(
ECTC
),
Las Vegas, NV
, June 1–4, pp.
91
105
.10.1109/ECTC.2010.5490891
23.
Lall
,
P.
,
Shantaram
,
S.
,
Angral
,
A.
, and
Kulkarni
,
M.
,
2009
, “
Explicit Submodeling and Digital Image Correaltion Based Life-Prediction of Lead-free Electronics Under Shock-Impact
,”
59th Electronic Component and Technology Conference
(
ECTC 2009
), San Diego, CA, May 26–29, pp.
542
555
.10.1109/ECTC.2009.5074067
24.
Lall
,
P.
,
Choudhary
,
P.
,
Gupte
,
S.
, and
Suhling
,
J.
,
2008
, “
Health Monitoring for Damage Initiation and Progression During Mechanical Shock in Electronic Assemblies
,”
IEEE Trans. Compon. Packag. Technol.
,
31
(
1
), pp.
173
183
.10.1109/TCAPT.2008.916853
25.
Lall
,
P.
,
Panchagade
,
D.
,
Choudhary
,
P.
,
Gupte
,
S.
, and
Suhling
,
J.
,
2008
, “
Failure-Envelope Approach to Modeling Shock and Vibration Survivability of Electronic and MEMS Packaging
,”
IEEE Trans. Compon. Packag. Technol.
,
31
(
1
), pp.
104
113
.10.1109/TCAPT.2008.916804
26.
Lall
,
P.
,
Gupte
,
S.
,
Choudhary
,
P.
, and
Suhling
,
J.
,
2007
, “
Solder-Joint Reliability in Electronics Under Shock and Vibration Using Explicit Finite Element Sub-Modeling
,”
IEEE Trans. Electron. Packag. Manuf.
,
30
(
1
), pp.
74
83
.10.1109/TEPM.2006.890642
27.
Miller
,
T.
,
Schreier
,
H.
, and
Reu
,
P.
,
2007
, “
High-Speed DIC Data Analysis From a Shaking Camera System
,”
SEM Conference
and Exposition on Experimental and Applied Mechanics,
Springfield, MA
, June 4–6, Paper No. 278.
28.
Park
,
S.
,
Al-Yafawi
,
A.
,
Yu
,
D.
,
Kwak
,
J.
,
Lee
,
J.
, and
Goo
,
N.
,
2008
, “
Influence of Fastening Methods on the Dynamic Response and Reliability Assessment of PCBS in Cellular Phones Under Free Drop
,”
11th Intersociety Conference on Thermal and Thermomechanical Phenomena
in Electronic Systems (
ITHERM 2008
),
Orlando, FL
, May 28–31, pp.
876
882
.10.1109/ITHERM.2008.4544358
29.
Park
,
S.
,
Reichman
,
A.
,
Kwak
,
J.
, and
Chung
,
S.
,
2007
, “
Whole Field Analysis of Polymer Film
,”
SEM Annual Conference & Exposition on Experimental and Applied Mechanics
,
Springfield, MA
, June 4–6, Paper 304.
30.
Park
,
S.
,
Shah
,
C.
,
Kwak
,
J.
,
Jang
,
C.
, and
Pitarresi
,
J.
,
2007
, “
Transient Dynamic Simulation and Full-Field Test Validation for a Slim-PCB of Mobile Phone Under Drop Impact
,”
57th Electronic Components and Technology Conference
(
ECTC '07
),
Reno, NV
, May 29–June 1, pp.
914
923
.10.1109/ECTC.2007.373907
31.
Peterson
,
D.
,
Cheng
,
C.
, and
Karulkar
,
P. C.
,
2008
, “
Characterization of Drop Impact Survivability of a 3D CSP Stack Module
,”
58th Electronic Component and Technology Conference
(
ECTC 2008
),
Lake Buena Vista, FL
, May 27–30, pp.
1648
1653
.10.1109/ECTC.2008.4550198
32.
Scheijgrond
,
P. L. W.
,
Shi
,
D. X. Q.
,
Driel
,
W. D. V.
,
Zhang
,
G. Q.
, and
Nijmeijer
,
H.
,
2005
, “
Digital Image Correlation for Analyzing Poratable Electronic Products During Drop Impact Tests
,”
6th International Conference on Electronic Packaging Technology
(
ICEPT
), Shenzhen, China, Aug. 30–Sept. 2, pp.
121
126
.10.1109/ICEPT.2005.1564683
33.
Bieler
,
T.
, and
Jiang
,
H.
,
2006
, “
Influence of Sn Grain Size and Orientation on the Thermomechanical Response and Reliability of Pb-Free Solder Joints
,”
56th Electronic Components and Technology Conference
(
ECTC
), San Diego, CA, May 30-June 2, pp.
1462
1471
.10.1109/ECTC.2006.1645849
34.
Pendse
,
R. D.
, and
Zhou
,
P.
,
2002
, “
Methodology for Predicting Solder Joint Reliability in Semiconductor Packages
,”
Microelectron. Reliab.
,
42
(
2
), pp.
301
305
.10.1016/S0026-2714(01)00130-5
35.
Sun
,
Y.
,
Pang
,
J.
,
Shi
,
X.
, and
Tew
,
J.
,
2006
, “
Thermal Deformation Measurement by Digital Image Correlation Method
,”
10th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems
(
ITHERM '06
), San Diego, CA, May 30–June 2, pp.
921
927
.10.1109/ITHERM.2006.1645444
36.
Xu
,
L.
, and
Pang
,
H.
,
2006
, “
Combined Thermal and Electromigration Exposure Effect on SnAgCu BGA Solder Joint Reliability
,”
Electronic Components and Technology Conference
(
ECTC
), San Diego, CA, May 30–June 2, pp.
1154
1159
.10.1109/ECTC.2006.1645799
37.
Yogel
,
D.
,
Grosser
,
V.
,
Schubert
,
A.
, and
Michel
,
B.
,
2001
, “
MicroDAC Strain Measurement for Electronics Packaging Structures
,”
Opt. Lasers Eng.
,
36
(
2
), pp.
195
211
.10.1016/S0143-8166(01)00034-3
38.
Zhang
,
F.
,
Li
,
M.
,
Xiong
,
C.
,
Fang
,
F.
, and
Yi
,
S.
,
2005
, “
Thermal Deformation Analysis of BGA Package by Digital Image Correlation Technique
,”
Microelectron. Int.
,
22
(
1
), pp.
34
42
.10.1108/13565360510575530
39.
Zhou
,
P.
, and
Goodson
,
K. E.
,
2001
, “
Sub-Pixel Displacement and Deformation Gradient Measurement Using Digital Image-Speckle Correlation (DISC)
,”
Opt. Eng.
,
40
(
8
), pp.
1613
1620
.10.1117/1.1387992
40.
Gu
,
J.
,
Cooreman
,
S.
,
Smits
,
A.
,
Bossuyt
,
S.
,
Sol
,
H.
,
Lecompte
,
D.
, and
Vantomme
,
J.
,
2006
,
Full-Field Optical Measurement For Material Parameter Identification With Inverse Methods
, Vol.
85
,
WIT Transactions on The Built Environment
, Southampton, UK.10.2495/HPSM060241
41.
Lall
,
P.
,
Panchagade
,
D.
,
Choudhary
,
P.
,
Suhling
,
J.
, and
Gupte
,
S.
,
2005
, “
Failure-Envelope Approach to Modeling Shock and Vibration Survivability of Electronic and MEMS Packaging
,”
55th Electronic Components and Technology Conference
(
ECTC
), Lake Buena Vista, FL, May 31–June 3, pp.
480
490
.10.1109/ECTC.2005.1441309
42.
Lall
,
P.
,
Panchagade
,
D.
,
Liu
,
Y.
,
Johnson
,
W.
, and
Suhling
,
J.
,
2004
, “
Models for Reliability Prediction of Fine-Pitch BGAs and CSPs in Shock and Drop-Impact
,” 54th Electronic Components and Technology Conference
(ECTC)
, Las Vegas, NV, June 1–4, pp.
1296
1303
.10.1109/ECTC.2004.1320280
43.
Lall
,
P.
,
Iyengar
,
D.
,
Shantaram
,
S., S.
,
Gupta
,
P.
,
Panchagade
,
D.
, and
Suhling
,
J.
,
2008
, “
Feature Extraction and Health Monitoring Using Image Correlation for Survivability of Lead-free Packaging Under Shock and Vibration
,”
International Conference on Thermal, Mechanical, and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems
(
EuroSimE 2008
),
Freiburg, Germany
, Apr. 20–23, pp.
594
608
.10.1109/ESIME.2008.4525091
44.
Lall
,
P.
,
Iyengar
,
D.
,
Shantaram
,
S.
,
Pandher
,
R.
,
Panchagade
,
D.
, and
Suhling
,
J.
,
2008
, “
Design Envelopes and Optical Feature Extraction Techniques for Survivability of SnAg Lead-free Packaging Architectures Under Shock and Vibration
,”
58th Electronic Components and Technology Conference
(
ECTC 2008
),
Lake Buena Vista, FL
, May 27–30, pp.
1036
1047
.10.1109/ECTC.2008.4550104
45.
Lall
,
P.
,
Choudhary
,
P.
,
Gupte
,
S.
,
Suhling
,
J.
, and
Hofmeister
,
J.
,
2007
, “
Statistical Pattern Recognition and Built-In Reliability Test for Feature Extraction and Health Monitoring of Electronics Under Shock Loads
,”
57th Electronic Components and Technology Conference
(
ECTC '07
),
Reno, NV
, May 29–June 1, pp.
1161
1178
.10.1109/ECTC.2007.373942
46.
Lall
,
P.
,
Panchagade
,
D.
,
Iyengar
,
D.
,
Shantaram
,
S.
,
Suhling
,
J.
, and
Schrier
,
H.
,
2007
, “
High-Speed Digital Image Correlation for Transient-Shock Reliability of Electronics
,”
57th Electronic Components and Technology Conference
(
ECTC '07
),
Reno, NV
, May 29–June 1, pp.
924
939
.10.1109/ECTC.2007.373908
47.
Lall
,
P.
,
Panchagade
,
D.
,
Liu
,
Y.
,
Johnson
,
W.
, and
Suhling
,
J.
,
2007
, “
Smeared Property Models for Shock-Impact Reliability of Area-Array Packages
,”
ASME J. Electron. Packag.
,
129
(
4
), pp.
373
381
.10.1115/1.2804085
48.
Lall
,
P.
,
Choudhary
,
P.
, and
Gupte
,
S.
,
2006
, “
Health Monitoring for Damage Initiation & Progression During Mechanical Shock in Electronic Assemblies
,”
56th Electronic Components and Technology Conference
(
ECTC
),
San Diego, CA
, May 30–June 2, pp.
85
94
.10.1109/ECTC.2006.1645630
49.
Irving
,
S.
, and
Liu
,
Y.
,
2004
, “
Free Drop Test Simulation for Portable IC Package by Implicit Transient Dynamics FEM
,” 54th Electronic Components and Technology Conference (
ECTC
), Las Vegas, NV, June 1–4, pp.
1062
1066
.10.1109/ECTC.2004.1319471
50.
Pitaressi
,
J.
,
Roggeman
,
B.
, and
Chaparala
,
S.
,
2004
, “
Mechanical Shock Testing and Modeling of PC Motherboards
,”
54th Electronic Components and Technology Conference
(
ECTC
), Las Vegas, June 1–4, pp.
1047
1054
.10.1109/ECTC.2004.1319469
51.
Tee
,
T. Y.
,
Ng
,
H. S.
,
Lim
,
C. T.
,
Pek
,
E.
, and
Zhong
,
Z.
,
2003
, “
Board Level Drop Test and Simulation of TFBGA Packages for Telecommunication Applications
,” (
ECTC
),
New Orleans, LA, May 27–30
, pp.
121
129
.10.1109/ECTC.2003.1216266
52.
Tiwari
,
V.
,
Williams
,
S.
,
Sutton
,
M.
, and
McNeill
,
S.
,
2005
, “
Application of Digital Image Correlation in Impact Testing
,”
SEM Annual Conference and Exposition on Experimental and Applied Mechanics
, Portland, OR, June 7–9.
53.
Zhu
,
L.
, and
Marccinkiewicz
,
W.
,
2004
, “
Drop Impact Reliablity Analysis of CSP Packages at Board and Product System Levels Through Modeling Approaches
,”
9th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
(
ITHERM '04
), Las Vegas, NV, June 1–4, pp.
296
303
.10.1109/ITHERM.2004.1318296
54.
Zhu
,
L.
,
2003
, “
Modeling Technique for Reliability Assessment of Portable Electronic Product Subjected to Drop Impact Loads
,”
53rd Electronic Components and Technology Conference
(
ECTC
), New Orleans, LA, May 27–30, pp.
100
104
.10.1109/ECTC.2003.1216263
55.
Zhu
,
L.
,
2001
, “
Submodeling Technique for BGA Reliability Analysis of CSP Packaging Subjected to an Impact Loading
,”
ASME
Paper No. IPACK2001-15873
.
56.
Abdul-Baqi
,
A.
,
Schreurs
,
P. J. G.
, and
Geers
,
M. G. D.
,
2005
, “
Fatigue Damage Modeling in Solder Interconnects Using a Cohesive Zone Approach
,”
Int. J. Solids Struct.
,
42
(
3–4
), pp.
927
942
.10.1016/j.ijsolstr.2004.07.026
57.
Towashiraporn
,
P.
, and
Xie
,
C.
,
2006
, “
Cohesive Modeling of Solder Interconnect Failure in Board Level Drop Test
,”
10th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems
(
ITHERM '06
), San Diego, CA, May 30-June 2, pp.
817
825
.10.1109/ITHERM.2006.1645431
58.
Reu
,
P.
, and
Miller
,
T.
,
2006
, “
High-Speed Multi-Camera DIC for Finite Element Model Validation, Part 1
,”
SEM Annual Conference and Exposition on Experimental and Applied Mechanics
, St. Louis, MO, June 4–7.
59.
Tiwari
,
V.
,
Williams
,
S.
,
Sutton
,
M.
, and
McNeill
,
S.
,
2005
, “
Application of Digital Image Correlation in Impact Testing
,”
SEM Annual Conference and Exposition on Experimental and Applied Mechanics
, Portland, OR, June 7–9.
60.
Shi
,
X.
,
Pang
,
H.
,
Zhang
,
X.
,
Liu
,
Q.
, and
Ying
,
M.
,
2004
, “
In-Situ Micro-Digital Image Speckle Correlation Technique for Characterization of Materials' Properties and Verification of Numerical Models
,”
IEEE Trans. Compon. Packag. Technol.
,
27
(
4
), pp.
659
667
.10.1109/TCAPT.2004.838907
61.
Srinivasan
,
V.
,
Radhakrishnan
,
S.
,
Zhang
,
X.
,
Subbarayan
,
G.
,
Baughn
,
T.
, and
Nguyen
,
L.
,
2005
, “
High Resolution Characterization of Materials Used in Packages Through Digital Image Correlation
,”
ASME
Paper No. IPACK2005-73258.10.1115/IPACK2005-73258
62.
Bay
,
B.
,
Smith
,
T.
,
Fyhrie
,
D.
, and
Saad
,
M.
,
1999
, “
Digital Volume Correlation: Three-Dimension Strain Mapping Using X-Ray Tomography
,”
Exp. Mech.
,
39
(
3
), pp.
217
226
.10.1007/BF02323555
63.
Amodio
,
D.
,
Broggiato
,
G.
,
Campana
,
F.
, and
Newaz
,
G.
,
2003
, “
Digital Speckle Correlation for Strain Measurement by Image Analysis
,”
Exp. Mech.
,
43
(
4
), pp.
396
402
.10.1007/BF02411344
64.
Kehoe
,
L.
,
Lynch
,
P.
, and
Guénebaut
,
V.
,
2006
, “
Measurement of Deformation and Strain in First Level C4 Interconnect and Stacked Die Using Optical Digital Image Correlation
,”
56th Electronic Components and Technology Conference
(
ECTC
), San Diego, CA, May 30–June 2, pp.
1874
1881
.10.1109/ECTC.2006.1645916
65.
Silling
,
S. A.
, and
Askari
,
E.
,
2005
, “
A Meshfree Method Based on the Peridynamics Model of Solid Mechanics
,”
Comput. Struct.
,
83
(
17–18
), pp.
1526
1535
.10.1016/j.compstruc.2004.11.026
66.
Silling
,
S.
,
Zimmermann
,
M.
, and
Abeyaratne
,
R.
,
2003
, “
Deformation of Peridynamic Bar
,”
J. Elasticity
,
73
(
1
), pp.
173
190
.10.1023/B:ELAS.0000029931.03844.4f
67.
Silling
,
S.
,
2000
, “
Refomulation of Elasticity Theory for Discontinuities and Long-Range Forces
,”
J. Mech. Phys. Solids
,
48
(
1
), pp.
175
209
.10.1016/S0022-5096(99)00029-0
68.
Agwai
,
A.
,
Guven
,
I.
, and
Madenci
,
E.
,
2008
, “
Peridynamic Theory for Impact Damage Prediction and Propagation in Electronic Packages Due to Drop
,”
58th Electronic Components and Technology Conference
(
ECTC 2008
),
Lake Buena Vista, FL
, May 27–30, pp.
1048
1053
.10.1109/ECTC.2008.4550105
69.
Macek
,
R.
, and
Silling
,
S.
,
2007
, “
Peridynamics Via Finite Element Analysis
,”
Finite Elem. Anal. Des.
,
43
(
15
), pp.
1168
1178
.10.1016/j.finel.2007.08.012
70.
Bao
,
Y.
,
2005
, “
Dependence of Ductile Crack Formation in Tensile Tests on Stress Triaxiality, Stress and Strain Ratios
,”
Eng. Fract. Mech.
,
77
(
4
), pp.
505
522
.10.1016/j.engfracmech.2004.04.012
You do not currently have access to this content.