This study examines damage initiation and propagation in solder joints with voids, under thermomechanical cyclic loading. An accelerated thermal cycling test is conducted on printed wiring assemblies (PWAs) containing 256 input/output (I/O) plastic ball grid arrays (PBGAs) with voided solder joints. Destructive and nondestructive failure analyses of the solder balls are used to detect the presence of voids and to relate the extent of damage propagation to the number of thermal cycles. Particular cases of voided and damaged joints are selected from these tests, to guide the development of a strategy for modeling damage propagation, using a three dimensional global-local finite element analysis (FEA). The displacement results of the global FEA at the top and bottom of the selected solder balls are used as the boundary conditions in a local FEA model, which focuses on the details of damage initiation and propagation in the individual solder ball. The local model is error seeded with voids based on cases selected in experiment. The damage propagation rate is monitored for all the cases. The technique used to quantify cyclic creep-fatigue damage is a continuum model based on energy partitioning. A method of successive initiation is used to model the growth and propagation of damage in the selected case studies. The modeling approach is qualitatively verified using the results of the accelerated thermal cycling test. The verified modeling technique described above is then used for parametric study of the durability of voided solder balls in a ChipArray Thin Core BGA with 132 I/O (CTBGA132) assemblies, under thermal cycling. The critical solder ball in the package is selected and is error seeded with voids with different sizes and various distances from damage initiation site. The results show that voids in general are not detrimental to thermal cycling durability of the CTBGA132 assembly, except when a large portion of the damage propagation path is covered with voids. Small voids can arrest the damage propagation, but generally do not provide a significant increase in durability because the damage zone deflects around the void and also continues to propagate from other critical regions in the solder ball.

1.
Aspandiar
,
R.
, 2005, “
Voids in Solder Joints
,”
Technical Report, Intel Corporation, SMTA Northwest Chapter meeting
, Sept.
2.
Ye
,
H.
,
Basaran
,
C.
, and
Hopkins
,
D. C.
, 2003, “
Mechanical Degradation of Microelectronics Solder Joints Under Current Stressing
,”
Int. J. Solids Struct.
0020-7683,
40
, pp.
7269
7284
.
3.
Basaran
,
C.
,
Lin
,
M.
, and
Ye
,
H.
, 2003, “
A Thermodynamic Model for Electrical Current Induced Damage
,”
Int. J. Solids Struct.
0020-7683,
40
(
26
), pp.
7315
7327
.
4.
Lau
,
J. H.
, and
Harkins
,
C. G.
, 1998, “
Thermal Stress Analysis of SOIC Packages and Interconnections
,”
IEEE Trans. Compon., Hybrids, Manuf. Technol.
0148-6411,
11
(
4
), pp.
380
389
.
5.
Lee
,
N. C.
, 2002,
Reflow Processing and Troubleshooting SMT, BGA, CSP, and Flip Chip Technologies
,
Newnes
,
Boston
.
6.
Herzog
,
Th.
,
Wolter
,
K. J.
, and
Poetsch
,
F.
, 2003, “
Investigation of Void Formation and Shear Strength of Sn42Bi58 Solder Joints for Low Cost Application
,”
Proceedings of 53rd Electronic Components and Technology Conference
,
New Orleans
, May, pp.
1738
1745
.
7.
Liu
,
S.
, and
Mei
,
Y. H.
, 1994, “
Effects of Voids and Their Interactions on SMT Solder Joint Reliability
,”
Soldering Surf. Mount Technol.
0954-0911,
6
(
18
), pp.
21
28
.
8.
Huang
,
B.
,
Dasgupta
,
A.
, and
Lee
,
N. C.
, 2004, “
Effect of SAC Composition on Soldering Performance
,”
IEEE, SEMI International Electronic Manufacturing Technology Symposium
,
Piscataway, NJ
, pp.
45
55
.
9.
Stafstorm
,
E.
,
Singer
,
A.
,
McLenaghan
,
J.
, and
Nishu
,
K.
, 2003, “
Reducing Solder Voids With Copper Filled Microvias
,”
Circuits Assem.
1054-0407,
14
(
4
), pp.
22
24
.
10.
Fleck
,
N.
, and
Hutchinson
,
J.
, 1993, “
A Phenomenological Theory for Strain Gradient Effects in Plasticity
,”
J. Mech. Phys. Solids
0022-5096,
41
(
12
), pp.
1825
1857
.
11.
Fleck
,
N.
, and
Hutchinson
,
J.
, 1997, “
Strain Gradient Plasticity
,”
Adv. Appl. Mech.
0065-2156,
33
,
295
361
.
12.
Gomez
,
J.
, and
Basaran
,
C.
, 2005, “
A Thermodynamics Based Damage Mechanics Constitutive Model for Low Cycle Fatigue Analysis of Microelectronics Solder Joints Incorporating Size Effects
,”
Int. J. Solids Struct.
0020-7683,
42
, pp.
3744
3772
.
13.
Tvergaard
,
V.
, and
Niordson
,
C.
, 2004, “
Non-Local Plasticity Effect on Interaction of Different Size Voids
,”
Int. J. Plast.
0749-6419,
20
, pp.
107
120
.
14.
Liu
,
B.
,
Qiu
,
X.
,
Huang
,
Y.
,
Hwang
,
K. C.
,
Li
,
M.
, and
Lie
,
C.
, 2003, “
The Size Effect on Void Growth in Ductile Materials
,”
J. Mech. Phys. Solids
0022-5096,
51
, pp.
1171
1187
.
15.
Van Der Giessen
,
E.
,
Van Der Burg
,
M. W. D.
,
Needleman
,
A.
, and
Tvergaard
,
V.
, 1995, “
Void Growth Due to Creep and Grain Boundary Diffusion at High Triaxilaities
,”
J. Mech. Phys. Solids
0022-5096,
43
(
1
), pp.
123
165
.
16.
Zhang
,
Q.
, and
Dasgupta
,
A.
, 2005, “
Systematic Study on Thermo-Mechanical Durability of Pb-Free Assemblies: Experiments and FE Analysis
,”
ASME J. Electron. Packag.
1043-7398,
127
(
4
), pp.
415
429
.
17.
Bank
,
D. R.
,
Burnette
,
T. E.
,
Cho
,
Y. C.
,
Demarco
,
W. T.
, and
Mawer
,
A. J.
, 1996, “
The Effect of Solder Joint Voiding on Plastic Ball Grid Array Reliability
,”
Proceedings of Surface Mount International
, pp.
121
6
.
18.
Yunus
,
M.
,
Primavera
,
A.
, and
Srihari
,
K.
, 2003, “
Effect of Voids on the Reliability of BGA/CSP Solder Joints
,”
Microelectron. Reliab.
0026-2714, Vol.
43
(
12
), pp.
2077
2086
.
19.
Doroszuk
,
A.
,
Simeus
,
E.
,
Mehrotra
,
M.
,
Stegura
,
S.
,
Bowers
,
B.
,
Wickersham
,
J.
,
Ladera
,
K.
, and
Lyons
,
M. W.
, 2000, “
BGA Solder Joint Void and Its Effect on Thermal Fatigue
,”
SMTA International
,
Chicago
, Sept.
20.
Lau
,
J.
, and
Erasmus
,
S.
, 2002, “
Effect of Voids on Bump Chip Carrier (BCC++) Solder Joint Reliability
,”
IEEE Electronic Components and Technology Conference
,
San Diego
, May, pp.
992
1000
.
21.
Zhu
,
W.
, H.,
Stoecki
,
S.
,
Pape
,
H.
, and
Gan
,
S. L.
, 2003, “
Comparative Study on Solder Joint Reliability Using Different FE Models
,”
IEEE Electronic Packaging Technology Conference
, pp.
687
694
.
22.
Kim
,
D. S.
,
Yu
,
K.
, and
Shinutani
,
T.
, 2004, “
Effect of Void Formation on Thermal Fatigue Reliability of Lead-Free Solder Joints
,”
The Ninth Intersociety Conference on Thermal and Thermo-Mechanical Phenomena In Electronic Systems
,
Las Vegas, NV
, Jun. 1–4, Vol.
2
, pp.
325
329
.
23.
Gonzalez
,
M.
,
Vandevelde
,
B.
,
Vanfleteren
,
J.
, and
Manessis
,
D.
, 2005, “
Thermo-Mechanical FEM Analysis of Lead Free and Lead Containing Solder for Flip Chip Applications
,”
EMPC
,
Brugge, Belgium
, Jun.
24.
Terasaki
,
T.
, and
Tanie
,
H.
, 2005, “
Fatigue Crack Propagation Analysis for Micro Solder Joints With Voids
,”
International Symposium on Electronic Materials and Packaging, EMAP
,
Tokyo Japan
, Dec. pp.
38
42
.
25.
Ladani
,
L. J.
, and
Dasgupta
,
A.
, 2007, “
Effect of Voids on Thermo-Mechanical Durability of Pb-Free Solder Joints: Simulation and Modeling
,”
ASME J. Electron. Packag.
1043-7398,
129
(
3
), pp.
273
277
.
26.
Li
,
L.
,
Rao
,
Y.
, and
Lin
,
J.
, 2001, “
Pb Free Solder Paste Reflow Window Study for Flip-Chip Wafer Bumping
,”
Proceedings of the International Symposium and Exhibition on Advanced Packaging Materials Processes, Properties and Interfaces
,
Georgia, Braselton
, pp.
112
118
.
27.
Nurmi
,
S. T.
, 2003, “
The Influence of Multiple Reflow Cycles on Solder Joint Voids for Lead Free PBGA
,”
Soldering Surf. Mount Technol.
0954-0911,
15
(
1
), pp.
31
8
.
28.
Maattanen
,
K.
,
Happonen
,
J.
, and
Tuominen
,
A.
, 2001, “
The Effect of Melting Time on Lead Free Solder Strength
,”
IEEE Advances in Electronic Materials and Packaging, EMAP
,
Jeju Island, South Korea
, pp.
225
228
.
29.
Dasgupta
,
A.
,
Oyan
,
C.
,
Barker
,
D.
, and
Pecht
,
M.
, 1992, “
Solder Creep-Fatigue Analysis by an Energy-Partitioning Approach
,”
ASME J. Electron. Packag.
1043-7398,
114
(
2
),
152
160
.
30.
Garofalo
,
F.
, 1965,
Fundamentals of Creep and Creep-Rupture in Metals
Macmillan
,
New York
.
31.
Basaran
,
C.
,
Zhao
,
Y.
,
Tang
,
H.
, and
Gomez
,
J.
, 2005, “
A Damage-Mechanics-Based Constitutive Model for Solder Joints
,”
ASME J. Electron. Packag.
1043-7398,
127
, pp.
208
214
.
32.
Gou
,
Z.
, and
Conrad
,
H.
, 1993, “
Fatigue Crack Growth Rate in 63Sn37Pb Solder Joints
,”
ASME J. Electron. Packag.
1043-7398,
115
(
2
),
159
164
.
33.
Wiese
,
S.
,
Feusetel
,
F.
,
Rzapka
,
S.
, and
Meusel
,
E.
, 1999, “
Creep and Crack Propagation in Flip Chip Sn-PB37 Solder Joints
,”
IEEE ECTC Conference
,
San Diego
, pp.
1015
1020
.
34.
Ju
,
S. H.
,
Sandor
,
B. I.
, and
Plesha
,
M. E.
, 1996, “
Life Prediction of Solder Joints by Damage and Fracture Mechanics
,”
ASME J. Electron. Packag.
1043-7398,
118
, pp.
193
200
.
35.
Rafanelli
,
A. J.
, 1994, “
The Validation and Evaluation of the J-Integral for 63-37 Tin Lead Solder
,”
International Mechanical Engineering Congress and Exposition
, November 6–11, Chicago, IL, pp.
91
99
.
36.
Darveaux
,
R.
, 2002, “
Effect of Simulation Methodology on Solder Joint Crack Growth Correlation and Fatigue Life Prediction
,”
ASME J. Electron. Packag.
1043-7398,
124
,
147
154
.
37.
Darveaux
,
R.
, 1973, “
Crack Initiation and Growth in Surface Mount Solder Joints
,”
Proceeding of ISHM International Symposium on Microelectronics
, pp.
86
97
.
38.
Darveaux
,
R.
,
Banerji
,
K.
,
Mawer
,
A.
, and
Dody
,
G.
, 1995, “
Reliability of Plastic Ball Grid Array Assembly
,”
Ball Grid Array Technology
,
J.
Lau
ed.,
McGraw-Hill
,
New York
.
39.
Darveaux
,
R.
, 1997, “
Solder Joint Fatigue Life Model
,”
Design and Reliability of Solders and Solder Interconnections
,
Orlando, FL
, Feb., pp.
213
218
.
40.
Okura
,
J. H.
, 2001, “
Effect of Temperature and Moisture on Durability of Low Cost Flip Chip on Board (FCOB) Assemblies
,” Ph.D. thesis, Department of Mechanical Engineering, University of Maryland.
41.
Osterman
,
M.
, 2006, “
CALCE Lead Free Long Term Project
,”
CALCE Consortium Meeting
,
University of Maryland
,
College Park
, Oct.
42.
Ladani
,
L. J.
, 2006, “
Damage Initiation and Evolution in Voided and Un-Voided Pb-Free Solder Joints
,” Ph.D. thesis, Department of Mechanical Engineering, University of Maryland.
43.
Pilkey
,
W. D.
, 1997,
Peterson’S Stress Concentration Factors
, 2nd ed.,
Wiley
,
New York
.
You do not currently have access to this content.