Fluid flow and heat transfer characteristics on and around a central pedestal and a secondary pedestal, mounted on a flat surface with an impinging jet, are investigated. Surface Nusselt numbers, pressure coefficients (in the form of normalized wall static pressure relative to freestream static pressure), and flow visualization results are given for jet Reynolds numbers of 23,000 and 2300. The dimensionless nozzle-to-surface distance is 2, and the nondimensional height of the central pedestal is 0.5. Results are given for different secondary pedestal heights and locations. Spatially averaged Nusselt numbers measured with secondary pedestals employed are 13% to 33% higher than values measured with no secondary pedestal. Local Nusselt numbers and wall pressure coefficients, measured with the secondary pedestal present, are different from values measured with no secondary pedestal, because of flow reattachment and the two counter-rotating recirculation zones located between the two pedestals, and small local regions of flow separation and recirculation located on top of the secondary pedestal. As such, the present multiple pedestal data with impinging jets are useful for a variety of electronics cooling arrangements.
Skip Nav Destination
Article navigation
September 2007
Technical Papers
Jet Impingement Cooling of Chips Equipped With Multiple Cylindrical Pedestal Fins
D. H. Lee,
D. H. Lee
School of Mechanical and Automotive Engineering,
Inje University
, 607 Obang-dong, Gimhae, Gyongnam 621-749 Korea
Search for other works by this author on:
Y. S. Chung,
Y. S. Chung
Samsung Electronics Co., Ltd.
, 416, Maetan3-dong, Paldal-gu, Suwon, Gyeonggi-do 442-742, Korea
Search for other works by this author on:
P. M. Ligrani
P. M. Ligrani
Donald Schultz Professor of Turbomachinery, Director, Thermo-Fluids Laboratory, Department of Engineering Science,
Oxford University
, Parks Road, Oxford OX1 3PJ, United Kingdom
Search for other works by this author on:
D. H. Lee
School of Mechanical and Automotive Engineering,
Inje University
, 607 Obang-dong, Gimhae, Gyongnam 621-749 Korea
Y. S. Chung
Samsung Electronics Co., Ltd.
, 416, Maetan3-dong, Paldal-gu, Suwon, Gyeonggi-do 442-742, Korea
P. M. Ligrani
Donald Schultz Professor of Turbomachinery, Director, Thermo-Fluids Laboratory, Department of Engineering Science,
Oxford University
, Parks Road, Oxford OX1 3PJ, United KingdomJ. Electron. Packag. Sep 2007, 129(3): 221-228 (8 pages)
Published Online: October 30, 2006
Article history
Received:
November 28, 2004
Revised:
October 30, 2006
Citation
Lee, D. H., Chung, Y. S., and Ligrani, P. M. (October 30, 2006). "Jet Impingement Cooling of Chips Equipped With Multiple Cylindrical Pedestal Fins." ASME. J. Electron. Packag. September 2007; 129(3): 221–228. https://doi.org/10.1115/1.2753884
Download citation file:
Get Email Alerts
Sequential Versus Concurrent Effects in Combined Stress Solder Joint Reliability
J. Electron. Packag
Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?
J. Electron. Packag
Related Articles
Jet Impingement Cooling of Chips Equipped With Cylindrical Pedestal Profile Fins
J. Electron. Packag (June,2005)
Flow Visualization of Axisymmetric Impinging Jet on a Concave Surface
J. Heat Transfer (August,2018)
Electronic Cooling Using Synthetic Jet Impingement
J. Heat Transfer (September,2006)
Microelectromechanical System-Based Evaporative Thermal Management of High Heat Flux Electronics
J. Heat Transfer (January,2005)
Related Proceedings Papers
Related Chapters
Adding Surface While Minimizing Downtime
Heat Exchanger Engineering Techniques
In-Nozzle Flow Visualization of Marine Diesel Injector Nozzles with Different Inlet Radii
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Exchangers with Longitudinal-Fin Tubes
Heat Exchanger Engineering Techniques