The thermal fatigue failure of SnPb solder joints of flip chip on board with and without underfill for two types of flip-chip packages was investigated by conducting thermal cycling test, scanning acoustic microscopy observation, and cross section inspection. The corresponding 3-D finite element simulation was performed to analyze the effects of underfill on thermomechanical behavior. The viscoelasticity of underfill and the viscoplasticity of solder were considered in the 3-D simulations. The Coffin-Manson equation with material constants was fitted from the combination of the lifetime measured and the shear plastic strain range simulated by 3-D model. In the case with underfill, the plastic strain of every solder joint becomes very similar and little dependent on the position of solder joints. The modeled axial strain distribution coincided well with the distribution of microstructure coarsening visible in cross sections. The mismatch of thermal expansion resulted in an overall warpage of the assembly for the case with underfill, which decreased the shear deformation of the solder joints and increased the interface stress on the chip. The interface stress distribution from the 3-D simulation agreed very well with the experimental observations.
Skip Nav Destination
Article navigation
March 2003
Technical Papers
Quantitative Mechanism of Significant Benefits of Underfill in Flip-Chip Assemblies
Xia Cai,
Xia Cai
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Search for other works by this author on:
Liu Chen,
Liu Chen
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Search for other works by this author on:
Qun Zhang,
Qun Zhang
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Search for other works by this author on:
Bulu Xu,
Bulu Xu
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Search for other works by this author on:
Weidong Huang,
Weidong Huang
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Search for other works by this author on:
Xiaoming Xie,
Xiaoming Xie
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Search for other works by this author on:
Zhaonian Cheng
Zhaonian Cheng
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Search for other works by this author on:
Xia Cai
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Liu Chen
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Qun Zhang
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Bulu Xu
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Weidong Huang
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Xiaoming Xie
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Zhaonian Cheng
DaimlerChrysler SIM Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
Contributed by the Electronic and Photonic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received by the EPPD Division, January 25, 2002; revised manuscript received March 15, 2002. Associate Editor: D. T. Read.
J. Electron. Packag. Mar 2003, 125(1): 84-92 (9 pages)
Published Online: March 14, 2003
Article history
Received:
January 25, 2002
Revised:
March 15, 2002
Online:
March 14, 2003
Citation
Cai , X., Chen , L., Zhang , Q., Xu , B., Huang , W., Xie , X., and Cheng , Z. (March 14, 2003). "Quantitative Mechanism of Significant Benefits of Underfill in Flip-Chip Assemblies ." ASME. J. Electron. Packag. March 2003; 125(1): 84–92. https://doi.org/10.1115/1.1533802
Download citation file:
Get Email Alerts
Cited By
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Related Articles
Interactions Between Flip Chip Underfill and Solder Alloy
J. Electron. Packag (September,2010)
On Failure Mechanisms in Flip Chip Assembly—Part 1: Short-Time Scale Wave Motion
J. Electron. Packag (June,2008)
Comparative Studies on Solder Joint Reliability of Plastic and Ceramic Ball Grid Array Packages of the Same Form Factor Under Power and Accelerated Thermal Cycling
J. Electron. Packag (December,2008)
An Optical Method for Measuring the Two-Dimensional Surface Curvatures of Electronic Packages During Thermal Cycling
J. Electron. Packag (September,2001)
Related Proceedings Papers
Related Chapters
Design for Displacement Strains
Process Piping: The Complete Guide to ASME B31.3, Fourth Edition
Inspection and Maintenance of Ageing Concrete Oil and Gas Structures on the Norwegian Continental Shelf
Ageing and Life Extension of Offshore Facilities
Use of Large Standoff Magnetometry for Geohazard Pipeline Integrity Investigations
Pipeline Integrity Management Under Geohazard Conditions (PIMG)