Solder joint reliability of flip chip on various thickness of printed circuit board with imperfect underfill is presented in this study. Emphasis is placed on the determination of the temperature-dependent stress and plastic strain at the corner solder joint with different crack (delamination) lengths. Also, the strain energy release rate and phase angle at the crack tip of the interface between the underfill and solder mask are obtained by fracture mechanics. [S1043-7398(00)01104-X]
1.
Lau, J. H., 2000, Low Cost Flip Chip Technologies for DCA, WLCSP, and PBGA Assemblies, McGraw-Hill, New York, NY.
2.
Lau
, J. H.
, and Lee
, S. W. R.
, 2000
, “Effects of Underfill Delamination and Chip Size on the Reliability of Solder Bumped Flip Chip on Board
,” IMAPS Trans. Int. J. Microelectron. Electron. Packag.
, 23
, No. 1
, pp. 33
–39
.3.
Lau, J. H., and Lee, S. W. R., 1999, Chip Scale Package: Design, Materials, Process, Reliability, and Applications, McGraw-Hill, New York, NY.
4.
Lau, J. H., and Pao, Y. H., 1997, Solder Joint Reliability of BGA, CSP, Flip Chip, and Fine Pitch SMT Assemblies, McGraw-Hill, New York, NY.
5.
Hutchinson
, J. W.
, and Suo
, Z.
, 1992
, “Mixed Mode Cracking in Layered Materials
,” Adv. Appl. Mech.
, 29
, pp. 64
–187
.6.
Rice
, J. R.
, 1988
, “Elastic Fracture Mechanics Concepts for Interfacial Cracks
,” ASME J. Appl. Mech.
, 55
, pp. 98
–103
.7.
Malyshev
, B. M.
, and Salganik
, R. L.
, 1965
, “The Strength of Adhesive Joints Using the Theory of Cracks
,” Int. J. Fract. Mech.
, 1
, pp. 114
–128
.Copyright © 2000
by ASME
You do not currently have access to this content.
