Skip Nav Destination
Issues
November 2006
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Production of Hydrogen With Low Carbon Monoxide Formation Via Catalytic Steam Reforming of Methanol
J. Fuel Cell Sci. Technol. November 2006, 3(4): 369–374.
doi: https://doi.org/10.1115/1.2349514
Topics:
Carbon
,
Catalysts
,
Hydrogen
,
Methanol
,
Steam reforming
,
Temperature
,
Steam
Power Cycle Integration and Efficiency Increase of Molten Carbonate Fuel Cell Systems
J. Fuel Cell Sci. Technol. November 2006, 3(4): 375–383.
doi: https://doi.org/10.1115/1.2349515
Topics:
Energy generation
,
Fuel cells
,
Heat
,
Molten carbonate fuel cells
,
Steam
,
Fuels
,
Combined cycles
,
Steam turbines
,
Waste heat
A Reduced Fuel Cell Stack Model for Control and Fault Diagnosis
J. Fuel Cell Sci. Technol. November 2006, 3(4): 384–388.
doi: https://doi.org/10.1115/1.2349517
Topics:
Anodes
,
Carbon
,
Condensation
,
Evaporation
,
Fault diagnosis
,
Fuel cells
,
Heat transfer
,
Water
,
Temperature
,
Desorption
Development of Stabilized Cathodes for Molten Carbonate Fuel Cell
J. Fuel Cell Sci. Technol. November 2006, 3(4): 389–395.
doi: https://doi.org/10.1115/1.2349518
Topics:
Cobalt
,
Molten carbonate fuel cells
,
Nickel powders
,
Porosity
,
Coatings
,
Water
,
Manufacturing
,
Temperature
Influences of The Type and Thickness of Electrolyte on Solid Oxide Fuel Cell Hybrid System Performance
J. Fuel Cell Sci. Technol. November 2006, 3(4): 396–402.
doi: https://doi.org/10.1115/1.2349519
Topics:
Electrolytes
,
Solid oxide fuel cells
,
Temperature
Dynamic Load and Temperature Behavior of a PEFC-Hybrid-System
J. Fuel Cell Sci. Technol. November 2006, 3(4): 403–409.
doi: https://doi.org/10.1115/1.2349520
Topics:
Compressors
,
Fuel cells
,
Heat transfer
,
Metals
,
Optimization
,
Secondary cells
,
Stress
,
Temperature
,
Heat
,
Simulation
Optimization and Economic Analysis of an Hybrid Fuel Cell, PhotoVoltaic and Battery Electric Power Generation System
J. Fuel Cell Sci. Technol. November 2006, 3(4): 410–414.
doi: https://doi.org/10.1115/1.2349521
Sintering Behavior of Type Cathodes for Planar Anode-Supported SOFCs
J. Fuel Cell Sci. Technol. November 2006, 3(4): 415–421.
doi: https://doi.org/10.1115/1.2349522
Topics:
Anodes
,
Diffusion (Physics)
,
Electrolytes
,
Permeability
,
Sintering
,
Solid oxide fuel cells
,
Temperature
,
Grain size
Simulation of Biomass and/or Coal Gasification Systems Integrated With Fuel Cells
J. Fuel Cell Sci. Technol. November 2006, 3(4): 422–427.
doi: https://doi.org/10.1115/1.2349523
Topics:
Biomass
,
Coal
,
Fuel cells
,
Fuel gasification
,
Hydrogen
,
Proton exchange membrane fuel cells
,
Simulation
,
Fuel processing
Rotating Disk Electrode Study of Supported and Unsupported Catalysts for PEMFC Application
J. Fuel Cell Sci. Technol. November 2006, 3(4): 428–433.
doi: https://doi.org/10.1115/1.2349524
Topics:
Catalysts
,
Electrodes
,
Proton exchange membrane fuel cells
,
Carbon
,
Disks
,
Electrolytes
,
Hydrogen
,
Rotating disks
Stable Single-Chamber Solid Oxide Fuel Cells Based on Doped Ceria Electrolytes and as a New Cathode
J. Fuel Cell Sci. Technol. November 2006, 3(4): 434–437.
doi: https://doi.org/10.1115/1.2349525
Topics:
Electrolytes
,
Fuel cells
,
Solid oxide fuel cells
,
Manufacturing
,
Sol-gel processing
,
Sintering
,
X-ray diffraction
,
Anodes
,
Electrodes
Feasibility of Autothermally Reformed Natural Gas on Anode Supported Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. November 2006, 3(4): 438–444.
doi: https://doi.org/10.1115/1.2349526
Topics:
Anodes
,
Hydrogen
,
Natural gas
,
Solid oxide fuel cells
,
Sulfur
,
Fuels
,
Polarization (Electricity)
,
Polarization (Light)
,
Polarization (Waves)
,
Temperature
A Feasibility Study of an Auxiliary Power Unit Based on a PEM Fuel Cell for On-Board Applications
Michele Bagnoli, Bruno Belvedere, Michele Bianchi, Alberto Borghetti, Andrea De Pascale, Mario Paolone
J. Fuel Cell Sci. Technol. November 2006, 3(4): 445–451.
doi: https://doi.org/10.1115/1.2349527
Topics:
Batteries
,
Proton exchange membrane fuel cells
,
Stress
SIMULINK-FEMLAB Integrated Dynamic Simulation Model for a PEM Fuel Cell System
J. Fuel Cell Sci. Technol. November 2006, 3(4): 452–458.
doi: https://doi.org/10.1115/1.2349528
Investigation of the Reaction of Ethanol-Steam Mixtures in a YSZ Electrochemical Reactor Operated in a Fuel Cell Mode
J. Fuel Cell Sci. Technol. November 2006, 3(4): 459–463.
doi: https://doi.org/10.1115/1.2349529
Topics:
Ethanol
,
Fuel cells
,
Solid oxide fuel cells
,
Temperature
,
Water
,
Steam
,
Anodes
,
Catalysts
,
Methane
Effects of Operating Parameters on the Current Density Distribution in Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. November 2006, 3(4): 464–476.
doi: https://doi.org/10.1115/1.2349531
Topics:
Anodes
,
Current density
,
Design
,
Proton exchange membrane fuel cells
,
Fuel cells
,
Power density
,
Temperature
,
Stoichiometry
,
Membranes
Aerogel-Based PEMFC Catalysts Operating at Room Temperature
J. Fuel Cell Sci. Technol. November 2006, 3(4): 477–481.
doi: https://doi.org/10.1115/1.2349532
Topics:
Carbon
,
Catalysts
,
Platinum catalysts
,
Proton exchange membrane fuel cells
,
Temperature
,
Oxidation
,
Anodes
Fabrication and Performance of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. November 2006, 3(4): 482–486.
doi: https://doi.org/10.1115/1.2357747
Topics:
Anodes
,
Electrolytes
,
Manufacturing
,
Solid oxide fuel cells
,
Temperature
,
Painting
,
Scanning electron microscopy
,
Testing
,
Hydrogen
,
Vacuum
Technical Briefs
Reduction and Reoxidation Processes of Composite for Solid Oxide Fuel Cell Anodes
J. Fuel Cell Sci. Technol. November 2006, 3(4): 487–491.
doi: https://doi.org/10.1115/1.2349533
Topics:
Anodes
,
Composite materials
,
Oxidation
,
Solid oxide fuel cells
,
Temperature
,
Cermets
,
Hydrogen
Fuel Cells as Energy Sources for Future Mobile Devices
J. Fuel Cell Sci. Technol. November 2006, 3(4): 492–494.
doi: https://doi.org/10.1115/1.2349534
Topics:
Energy resources
,
Fuel cells
Biosyngas Utilization in Solid Oxide Fuel Cells With Anodes
J. Fuel Cell Sci. Technol. November 2006, 3(4): 495–498.
doi: https://doi.org/10.1115/1.2349535
Highly Efficient Conversion of Ammonia in Electricity by Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. November 2006, 3(4): 499–502.
doi: https://doi.org/10.1115/1.2349536
Topics:
Anodes
,
Cracking (Materials)
,
Current density
,
Flow (Dynamics)
,
Fracture (Process)
,
Fuels
,
Heat exchangers
,
Solid oxide fuel cells
,
Temperature
,
Electrolytes
Email alerts
RSS Feeds
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
Joint Model Parameter Identification and EKF Algorithm for the SOC Estimation of LFP Battery
J. Electrochem. En. Conv. Stor