The manifold is an essential part of the fuel cell stack. Evidently, evenly distributed reactants are a prerequisite for an efficient fuel cell stack. In this study, the cathode manifold ability to distribute air to the cells of a 70 cell stack is investigated experimentally. By means of 20 differential pressure gauges, the flow distribution is mapped for several geometrical and operating conditions. Special attention is given to the inlet conditions of the manifold. Here, a diffuser design was constructed in order to replace the conventional circular inlet design. The diffuser design showed significant improvements to the flow distribution in comparison to the circular design. Moreover, the best flow distribution was found using a U-shaped configuration.

1.
Hu
,
G.
,
Fan
,
J.
,
Chen
,
S.
,
Liu
,
Y.
, and
Cen
,
K.
, 2004, “
Three-Dimensional Numerical Analysis of Proton Exchange Membrane Fuel Cells (PEMFCS) With Conventional and Interdigitated Flow Fields
,”
J. Power Sources
0378-7753,
136
, pp.
1
9
.
2.
Jung
,
H.
,
Lee
,
W.
,
Park
,
J.
, and
Kim
,
C.
, 2004, “
Numerical Analysis of a Polymer Electrolyte Fuel Cell
,”
Int. J. Hydrogen Energy
0360-3199,
29
, pp.
945
954
.
3.
Yoon
,
S.
,
Ross
,
J.
,
Mench
,
M.
, and
Sharp
,
K.
, 2006, “
Gas-Phase Particle Image Velocimetry (PIV) for Application to the Design of Fuel Cell Reactant Flow Channels
,”
J. Power Sources
0378-7753,
160
(
2
), pp.
1017
1025
.
4.
Maharudrayya
,
S.
,
Jayanti
,
S.
, and
Deshpande
,
A. P.
, 2005, “
Flow Distribution and Pressure Drop in Parallel-Channel Configurations of Planar Fuel Cells
,”
J. Power Sources
0378-7753,
144
, pp.
94
106
.
5.
Martin
,
J.
,
Oshkai
,
P.
, and
Djilali
,
N.
, 2005, “
Flow Structures in a U-Shaped Fuel Cell Flow Channel: Quantitative Visualization Using Particle Image Velocimetry
,”
ASME J. Fuel Cell Sci. Technol.
1550-624X,
2
, pp.
70
80
.
6.
Costamagna
,
P.
,
Arato
,
E.
,
Achenbach
,
E.
, and
Reus
,
U.
, 1994, “
Fluid Dynamic Study of Fuel Cell Devices: Simulation and Experimental Validation
,”
J. Power Sources
0378-7753,
52
, pp.
243
249
.
7.
Boersma
,
R. J.
, and
Sammes
,
N. M.
, 1997, “
Distribution of Gas Flow in Internally Manifolded Solid Oxide Fuel-Cell Stacks
,”
J. Power Sources
0378-7753,
66
, pp.
41
45
.
8.
Koh
,
J. H.
,
Seo
,
H. K.
,
Lee
,
C. G.
,
Yoo
,
Y. S.
, and
Lim
,
H. C.
, 2003, “
Pressure and Flow Distribution in Internal Gas Manifolds of a Fuel-Cell Stack
,”
J. Power Sources
0378-7753,
115
, pp.
54
65
.
9.
Mohan
,
G.
,
Rao
,
B. P.
,
Das
,
S. K.
,
Pandiyan
,
S.
,
Rajalakshmi
,
N.
, and
Dhathathreyan
,
K. S.
, 2004, “
Analysis of Flow Maldistribution of Fuel and Oxidant in a PEMFC
,”
ASME J. Energy Resour. Technol.
0195-0738,
126
, pp.
262
270
.
10.
Mackie
,
R.
,
Sui
,
P. C.
, and
Djilali
,
N.
, 2006, “
CFD and Flow Network Analysis of Manifolding in a PEMFC
,”
Proceedings of the Fourth International Conference on Fuel Cell Science, Engineering and Technology
.
11.
Karimi
,
G.
,
Baschuk
,
J.
, and
Li
,
X.
, 2005, “
Performance Analysis and Optimization of PEM Fuel Cell Stacks Using Flow Network Approach
,”
J. Power Sources
0378-7753,
147
, pp.
162
177
.
12.
Idelchik
,
I. E.
, 1993,
Handbook of Hydraulic Resistance
,
3rd ed.
,
Begell
,
Redding, CT
.
13.
Grega
,
L. M.
,
McGarry
,
M.
, and
Begum
,
M.
, 2006, “
Velocity Measurements in a PEM Fuel Cell Manifold and Individual Cells Using Particle Image Velocimetry
,”
Proceedings of the Fourth International Conference on Fuel Cell Science, Engineering and Technology
.
14.
Munson
,
B. R.
,
Young
,
D. F.
, and
Okiishi
,
T. H.
, 2002,
Fundamentals of Fluid Mechanics
,
4th ed.
,
Wiley
,
New York
.
15.
McGarry
,
M.
, and
Grega
,
L.
, 2006, “
Effects of Inlet Mass Flow Distribution and Magnitude on Reactant Distribution for PEM Fuel Cells
,”
ASME J. Fuel Cell Sci. Technol.
1550-624X,
3
, pp.
45
50
.
You do not currently have access to this content.