Two techniques of spray pyrolysis, namely, electrostatic and pneumatic spray deposition, were used to deposit samaria-doped ceria (SDC) electrolyte and lanthanum strontium cobalt ferrite (LSCF) cathode on cermet or metal supported anodes for solid oxide fuel cells (SOFCs) operated at reduced temperature. The deposition processes, the properties of the deposited films, and the electrochemical performances of the fabricated cells are reported in this paper. The deposited SDC electrolytes were dense and gas-tight, and had good adhesion to the underlying anodes. The deposited LSCF cathode had a preferred morphology to facilitate the transport of oxygen gas and effective contact with the electrolyte. Button cell testing indicated that the SOFCs with electrolyte or cathode deposited by spray pyrolysis had good electrochemical performance. This study demonstrated that spray pyrolysis is a cost-effective process for fabricating thin film SOFCs, especially metal supported SOFCs.
Skip Nav Destination
e-mail: yongsong.xie@nrc.gc.ca
Article navigation
April 2010
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Thin Film Solid Oxide Fuel Cells Deposited by Spray Pyrolysis
Yongsong Xie,
Yongsong Xie
Institute for Fuel Cell Innovation,
e-mail: yongsong.xie@nrc.gc.ca
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Roberto Neagu,
Roberto Neagu
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Ching-Shiung Hsu,
Ching-Shiung Hsu
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Xinge Zhang,
Xinge Zhang
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Cyrille Decès-Petit,
Cyrille Decès-Petit
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Wei Qu,
Wei Qu
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Rob Hui,
Rob Hui
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Sing Yick,
Sing Yick
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Mark Robertson,
Mark Robertson
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Radenka Maric,
Radenka Maric
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Dave Ghosh
Dave Ghosh
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Search for other works by this author on:
Yongsong Xie
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canadae-mail: yongsong.xie@nrc.gc.ca
Roberto Neagu
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Ching-Shiung Hsu
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Xinge Zhang
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Cyrille Decès-Petit
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Wei Qu
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Rob Hui
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Sing Yick
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Mark Robertson
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Radenka Maric
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada
Dave Ghosh
Institute for Fuel Cell Innovation,
National Research Council Canada
, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, CanadaJ. Fuel Cell Sci. Technol. Apr 2010, 7(2): 021007 (6 pages)
Published Online: January 6, 2010
Article history
Received:
February 20, 2008
Revised:
July 10, 2008
Online:
January 6, 2010
Published:
January 6, 2010
Citation
Xie, Y., Neagu, R., Hsu, C., Zhang, X., Decès-Petit, C., Qu, W., Hui, R., Yick, S., Robertson, M., Maric, R., and Ghosh, D. (January 6, 2010). "Thin Film Solid Oxide Fuel Cells Deposited by Spray Pyrolysis." ASME. J. Fuel Cell Sci. Technol. April 2010; 7(2): 021007. https://doi.org/10.1115/1.3176401
Download citation file:
Get Email Alerts
Cited By
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
Joint Model Parameter Identification and EKF Algorithm for the SOC Estimation of LFP Battery
J. Electrochem. En. Conv. Stor
Related Articles
Development of Ceria Based SOFCs With a High Performance La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 − δ – Ce 0.9 Gd 0.1 O 1.95 – Ag Composite Cathode
J. Fuel Cell Sci. Technol (December,2010)
Various Lanthanum Ferrite-Based Cathode Materials With Ni and Cu Substitution for Anode-Supported Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol (December,2010)
Study of the Rate Limiting Step of the Cathodic Process in Anode Supported Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol (February,2008)
Performances and Degradation Phenomena of Solid Oxide Anode Supported Cells With LSM and LSCF Cathodes: An Experimental Assessment
J. Fuel Cell Sci. Technol (February,2009)
Related Proceedings Papers
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Inhibiting Pyrolysis Process for Fiber-Reinforced Composites by Using Flame Retardants Additions
International Conference on Software Technology and Engineering, 3rd (ICSTE 2011)
The Synthesize Bio-Oil from Manila Grass (Zoysia Matrell (L.) Merr.) Transformed By Pyrolysis
International Conference on Computer Technology and Development, 3rd (ICCTD 2011)