Different applications for the decentralized stationary or mobile power supply require the usage of liquid hydrocarbons such as fuel oil, diesel, or gas oil in fuel cell systems. Reducing the sulfur content of conventional liquid fuels such as diesel or gasoline below $10ppm$, the usage of these fuels in fuel cell applications becomes increasingly promising. The first process step represents thereby the reforming, which can be carried out in different ways. One of the commonly favored gas process technologies is the steam reforming process, which is state of the art for natural gas applications. Using a proton exchange membrane (PEM) fuel cell requires a complex gas cleanup system. Using a pressurized steam reforming process offers a significant reduction of the whole system size by efficiently compressing the liquid educts. Complete PEM systems with steam reformers tend to have a higher efficiency than, for example, systems using the autothermal reforming process. Advanced diesel steam reformers for industrialization still have to be developed and improved. The Oel-Wärme-Institut gGmbH has successfully carried out research on steam reforming with variations of important parameters using a sulfur free reference fuel and desulfurized diesel. During the experiments, several parameters such as steam to carbon ratio, reformer inlet temperatures, catalysts, and fuels were varied. While running the process, a continuous product gas measurement was taken. The reformer is equipped with several thermocouples. Three of them are moveable to measure the temperature profile of the catalyst. The experiments show that product gas concentrations reach a nearly equilibrium concentration with reformer inlet temperatures $ϑ>700°C$ of a reference fuel∕steam mixture. Hydrogen concentrations over 70% were feasible. Constant inlet temperatures of $ϑ=850°C$ and a variation of the steam to carbon ratio only have a noticeable effect on the water gas shift equilibrium. After all experiments, carbon deposits were found in the steam reformer system and under some circumstances on the catalysts. Experiments with operating times of more than $20h$ were performed at a steam to carbon ratio of 4.5. The application of continuously desulfurized diesel fuel indicates a degradation of the catalyst after a few hours. For the overall system design of PEM fuel cell applications, an operation mode at a reduced steam to carbon ratio has to be developed.

1.
2002, Verband der Automobilindustrie (VDA),
Hamburger Abendblatt
, Germany, August.
2.
APG, 2004,
Ultrahigh Purity Hydrogen for PEM Fuel Cells
,
Aspen Products Group, Inc.
.
3.
Pocard
,
N.
, 2005, “
Diesel Fuel Cell APU Development at Ida Tech
,”
H2-Expo Proceedings
, September.
4.
Whyatt
,
G. A.
,
Fischer
,
C. M.
, and
Davis
,
J. M.
, 2002, “
Progress on the Development of a Microchannel Steam Reformer for Automotive Applications
,” presented at the AIChE Spring National Meeting,
New Orleans, LA
.
5.
Whyatt
,
G. A.
,
Brooks
,
K.
,
Davis
,
J.
,
Fischer
,
C.
,
King
,
D.
,
Pederson
,
L.
,
Stenkamp
,
S.
,
Tegrotenhuis
,
W.
, and
Wegeng
,
B.
, 2003, “
Microchannel Steam Reformation of Hydrocarbon Fuels
,” Pacific Northwest National Laboratory, Richland, Progress Report.
6.
Hansen
,
J. H.
, 2004, “
Fuels and Fuel Processing Options for Fuel Cells
,”
Fuel Cell World
,
Haldor Topsøe A∕S
,
Lucerne
.
7.
Borup
,
B.
,
Parkinson
,
W. J.
,
Inbody
,
M.
,
Tafoya
,
J.
, and
Guidry
,
D. R.
, 2004, “
Diesel Reforming for Fuel Cell Auxiliary Power Units
,” Los Alamos National Laboratory, SECA Core Technology Program Review, Boston, May.
8.
Mengel
,
C.
,
Konard
,
M.
,
Grote
,
M.
,
Wruck
,
R.
,
Lucka
,
K.
, and
Köhne
,
H.
, 2005, “
Development of an 30kW Diesel ATR Reformer
,”
H2-Expo Proceedings
,
Hamburg
, September.
9.
2002,
Composition of Diesel Fuel and Reference Fuel
,
PAE Labor
, Hamburg, Germany.
10.
,
M.
,
Hartmann
,
L.
,
Mengel
,
C.
,
Lucka
,
K.
, and
Köhne
,
H.
, 2005, “
Diesel Steam Reforming for PEM Fuel Cells
,”
Third European PEFC Forum
,
Lucerne
, July.
11.
Schuler
,
A.
,
Zähringer
,
T.
,
Doggwiler
,
B.
, and
Rüegge
,
A.
, 2000, “
Sulzer Hexis SOFC Running on Home Heating Oil
,”
Proceedings of the Fourth European SOFC Forum
,
Lucerne
.
12.
Fitzgerald
,
S. P.
,
Wegeng
,
R. S.
,
Tonkovich
,
A. Y.
,
Wang
,
Y.
,
Freeman
,
H. D.
,
Marco
,
J. L.
,
Roberts
,
G. L.
,
van der Wiel
, and
D. P.
, 2000, “
A Compact Steam Reforming Reactor for Use in an Automotive Fuel Processor
,” AIChE 2000 Spring National Meeting,
Atlanta
.
13.
NIST Chemistry WebBook, NIST Standard Reference Database No. 69, June 2005 release (http://webbook.nist.gov/chemistry/http://webbook.nist.gov/chemistry/)