Large scale power production benefits from the high efficiency of gas-steam combined cycles. In the lower power range, fuel cells are a good candidate to combine with gas turbines. Such systems can achieve efficiencies exceeding 60%. High-temperature solid oxide fuel cells (SOFC) offer good opportunities for this coupling. In this paper, a systematic method to select a design according to user specifications is presented. The most attractive configurations of this technology coupling are identified using a thermo-economic multi-objective optimization approach. The SOFC model includes detailed computation of losses of the electrodes and thermal management. The system is integrated using pinch based methods. A thermo-economic approach is then used to compute the integrated system performances, size, and cost. This allows to perform the optimization of the system with regard to two objectives: minimize the specific cost and maximize the efficiency. Optimization results prove the existence of designs with costs from $2400∕kW$ for a 44% efficiency to $6700∕kW$ for a 70% efficiency. Several design options are analyzed regarding, among others, fuel processing, pressure ratio, or turbine inlet temperature. The model of a pressurized SOFC–$μGT$ hybrid cycle combines a state-of-the-art planar SOFC with a high-speed micro-gas turbine sustained by air bearings.

1.
Lundberg
,
W. L.
,
Veyo
,
S. E.
, and
Moeckel
,
M. D.
, 2003, “
A High-Efficiency Solid Oxide Fuel Cell Hybrid Power System using the Mercury 50 Advanced Turbine Systems Gas Turbine
,”
J. Eng. Gas Turbines Power
0742-4795,
125
(
1
), pp.
51
58
.
2.
Massardo
,
A. F.
, and
Magistri
,
L.
, 2003, “
Internal Reforming Solid Oxide Fuel Cell Gas Turbine Combined Cycles (irsofc-gt) - Part II: Exergy and Thermoeconomic Analyses
,”
J. Eng. Gas Turbines Power
0742-4795,
125
(
1
), pp.
67
74
.
3.
Yi
,
Y. F.
,
Rao
,
A. D.
,
Brouwer
,
J.
, and
Samuelsen
,
G. S.
, 2004, “
Analysis and Optimization of a Solid Oxide Fuel Cell and Intercooled Gas Turbine (SOFC-ICGT) Hybrid Cycle
,”
J. Power Sources
0378-7753,
132
(
1–2
), pp.
77
85
.
4.
Marechal
,
F.
,
Palazzi
,
F.
,
Godat
,
J.
, and
Favrat
,
D.
, 2004, “
Thermo-Economic Modelling and Optimisation of Fuel Cell Systems
,”
Fuel Cells
1615-6846,
5
(
1
), pp.
5
24
.
5.
Palazzi
,
F.
,
Autissier
,
N.
,
Maréchal
,
F.
, and
van Herle
,
J.
, 2005, “
A Methodology for Thermo-Economic Modeling and Optimization of SOFC Systems
,”
Chemical Engineering Transactions
,
7
, pp.
13
18
.
6.
Marechal
,
F.
, and
Kalitventzeff
,
B.
, 1998, “
Process Integration: Selection of the Optimal Utility System
,”
Comput. Chem. Eng.
0098-1354,
22
, pp.
S149
S156
.
7.
Leyland
,
G. B.
, 2002, “
Multi-Objective Optimisation Applied to Industrial Energy Problems
,” Ph.D., Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland.
8.
Molyneaux
,
A.
, 2002, “
A Practical Evolutionary Method for the Multi-Objective Optimisation of Complex Energy Systems, Including Vehicle Drivetrains
,” Ph.D., Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland.
9.
van Herle
,
J.
,
Marechal
,
F.
,
Leuenberger
,
S.
,
Membrez
,
Y.
,
Bucheli
,
O.
, and
Favrat
,
D.
, 2004, “
Process Flow Model of Solid Oxide Fuel Cell System Supplied With Sewage Biogas
,”
J. Power Sources
0378-7753,
131
(
1–2
), pp.
127
141
.
10.
Molinelli
,
M.
, 2005, Internal communication.
11.
Turton
,
R.
, 1998,
Analysis, Synthesis, and Design of Chemical Processes
,
Prentice–Hall PTR
12.
Schiffmann
,
J.
, and
Favrat
,
D.
, 2005, “
Theoretical design of a high-speed low power radial turbo-compressor
,” Proceedings 6th European Turbomachinery Conference, Lille, France, March.
13.
Balje
,
O.
, 1981,
Turbomachines, Guide to Design, Selection and Theory
,
Wiley-Interscience
, New York.
14.
Kimijima
,
S.
, 2004, “
Prospect of SOFC-MGT Hybrid System
,” Proceedings International Workshop on Fuel Cell Hybrid Systems, S. I. of Technology, Tokyo, October, pp.
72
79
.