Skip Nav Destination
ASME Press Select Proceedings
International Conference on Advanced Computer Theory and Engineering (ICACTE 2009)
By
ISBN:
9780791802977
No. of Pages:
2012
Publisher:
ASME Press
Publication date:
2009
eBook Chapter
59 On Artificial Immune Techniques in the Surface Defects Detection System of Cold-Rolled Strips
By
Bo Su
Bo Su
Network and Information Center,
Southwest University of Science and Technology
, Mianyang, Sichuan Province, 621010
, P. R. China
; bosu@foxmail.com
Search for other works by this author on:
Page Count:
6
-
Published:2009
Citation
Su, B. "On Artificial Immune Techniques in the Surface Defects Detection System of Cold-Rolled Strips." International Conference on Advanced Computer Theory and Engineering (ICACTE 2009). Ed. Yi, X. ASME Press, 2009.
Download citation file:
To resolve the problem of the quality detection of cold-rolled strips online,, an approach for defects detection using the method of digital filter with the theory of artificial immune is put forward. The structure of the cold-rolled strips system and the principle of this method are stated detailed. The experiment results in one steelworks show this method can meet the demands of the quality detection of cold-rolled strips and can be used to implement the online quality detection of cold-rolled strips.
Topics:
Strips
Abstract
Key Words
1. Introduction
2. The Surface Defects System of Cold-Rolled Strips Using AIS Algorithm
3. Experimental Results & Analysis
4. Conclusions
References
This content is only available via PDF.
You do not currently have access to this chapter.
Email alerts
Related Chapters
Improved Algorithm of Strip Mill Load Distribution Based on the Targeted Proportion
International Conference on Computer and Computer Intelligence (ICCCI 2011)
Approximate Analysis of Plates
Design of Plate and Shell Structures
Strip Yield Model Solutions
The Stress Analysis of Cracks Handbook, Third Edition
GPS-Supported Method for Correcting Error of Stereopair Models Connection in Single Air Strip
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Related Articles
Effective Determination of Feed Direction and Tool Orientation in Five-Axis Flat-End Milling
J. Manuf. Sci. Eng (December,2010)
Flaw Tolerance in a Thin Strip Under Tension
J. Appl. Mech (September,2005)
Heat Transfer to Flat Strips Immersed in a Fluidized Bed
J. Heat Transfer (July,2011)