Skip to Main Content

Companion Guide to the ASME Boiler and Pressure Vessel Codes, Volume 1, Fifth Edition

Editor
K.R. Rao
K.R. Rao
Search for other works by this author on:
ISBN:
9780791861301
No. of Pages:
872
Publisher:
ASME Press
Publication date:
2018
1.
American Society of Mechanical Engineers
,
“Boiler and Pressure Vessel Code,” Section III
,
2010 Edition
,
2011 Addenda
.
2.
ASME Standards Technology, LLC
, “
Roadmap to Develop ASME Code Rules for the Construction of High Temperature Gas Cooled Reactors (HTGRs)
,”
STP-NU-045
,
September
2010
.
3.
ANSI/ANS-53.1-201X draft, “Nuclear Safety Design Process for Modular Helium-Cooled Reactor Plants”
(August 12, 2011 Draft for Reference with Recirculation Ballot)
.
4.
2011a Addenda ASME Boiler & Pressure Vessel Code Section I, Rules for Construction of Power Boilers
;
American Society of Mechanical Engineers
.
5.
2011a Addenda ASME Boiler & Pressure Vessel Code Section VIII, Division 1, Rules for Construction of Pressure Vessels
;
American Society of Mechanical Engineers
.
6.
ASME Boiler & Pressure Vessel Code Section III, Division 1, Criteria for Design of Elevated Temperature Class 1 Components
;
American Society of Mechanical Engineers
.
7.
2004 ASME Boiler and Pressure Vessel Code Section III, Division 1 Subsection NG, Core Support Structures
;
American Society of Mechanical Engineers
.
8.
Weeks
,
R. W.
, “
Mechanical Properties Test Data for Structural Materials Quarterly Progress Reports
,”
October
1973
,
ORNL-4936
,
Oak Ridge National Laboratory
.
9.
Corum
,
J. M.
, “
Examination of K-Factor Used in Code Case 1331 and Recommended Modifications
,” pp.
172
179
,
High Temperature Structural Design Methods for LMFBR Components Quarterly Progress Report for Period Ending June 30, 1973, Oak Ridge National Laboratory Report, ORNL-TM-4356
.
10.
Jetter
,
R. I.
,
“Elevated Temperature Design–Development and Implementation of Code Case 1592,”
Journal of Pressure Vessel Technology
, Vol.
98
,
Series J
, No.
3
,
August
1976
, pp.
222
229
.
11.
Bree
,
J
. “
Elastic–Plastic Behavior of Thin Tubes Subjected to Internal Pressure and Intermittent High-Heat Fluxes with Applications to Fast Nuclear-Reactor Fuel Elements
,”
Journal of Strain Analysis
, Vol.
2
, No.
3
,
1967
.
12.
Bree
,
J.
, “
Incremental Growth Due to Creep and Plastic Yielding of Tubes Subjected to Internal Pressure and Cyclic Thermal Stresses
,”
Journal of Strain Analysis
, Vol.
3
, No.
2
,
1968
.
13.
O’Donnell
,
W. J.
, and
Porowski
,
J. S.
, “
Upper Bounds for Accumulated Strains Due to Creep Ratcheting
,”
Trans ASME, Journal of Pressure Vessel Technology
, Vol.
96
,
1974
, pp.
126
.
Also WRC Bulletin No. 185 (1974)
.
14.
Sartory
,
W. K.
, “
Effect of Peak Thermal Strain on Simplified Ratcheting Analysis Procedures, PVP–Vol. 163, Structural Design for Elevated Temperature Environments–Creep, Ratchet, Fatigue, and Fracture
,”
Book No. H00478-1989
.
15.
Porowski
,
J. S.
, and
O’Donnell
,
W. J.
, “
Creep Ratcheting Bounds Based on Elastic Core Creep Concept
,”
Transactions of 5th International SMiRT
, Vol.
L
,
10/3
.
16.
Kremple and Wundt
, “
Hold Time Effects in High-Temperature Low Cycle Fatigue, A Literature Survey
,”
Metal Properties Council
,
1969
.
17.
Sartory
,
W. K.
, “
Assessment of Damage Accumulation Rules Based on Thermal Shock Tests of Cylinders
,”
UKAEA/USDOE Structural Integrity Specialists Meeting
,
ORNL
,
October 14–16
,
1987
.
18.
Bass
, “
Comparative Assessment of Ductility Exhaustion and Time Fraction Creep Damage Evaluation Procedure Based on US Creep-Fatigue Data for 316 Stainless Steel
,”
UKAEA/USDOE Structural Integrity Specialists Meeting ORNL
,
October 14–16
,
1987
.
19.
Takahashi
, “
Practical Use of Inelastic Analysis Method in FBR Design
,”
1987 EPRI/CREPI Joint Study Report
.
20.
Majumdar
, “
Thermomechanical Fatigue of Type 304 Stainless Steel
,”
amended results
,
December
1990
,
ASME B&PV Code SG-ETD Meeting Minutes
.
21.
Majundar
, “
Application of the UK Ductility Exhaustion Method to Type 304 Stainless Steel Data
,”
February
1993
,
ASME B&PV Code SG-ETD Meeting Minutes
.
22.
Brinkman
,
C. R.
,
Korth
,
G. E.
,
Beeston
,
J. M.
, “
Comparison of the Fatigue and Creep-Fatigue Properties of Unirradiated Type 304 and 316 Stainless Steel at 593°C (1100°F)
,”
ANCR-1078
,
August
1972
.
23.
Huddleston
,
R. L.
,
“An Improved Multiaxial Creep-Rupture Strength Criterion,”
Trans ASME
, Vol.
107
,
1984
, pp.
313
38
.
24.
Huddleston
,
R. L.
, “
Assessment of an Improved Multiaxial Strength Theory Based on Creep-Rupture Data for Type 316 Stainless Steel
,”
Trans ASME, Journal of Pressure Vessel Technology
,
May
1993
, pp.
177
184
.
25.
Corum
,
J. M.
, and
Sartory
,
W. K.
, “
Assessment of Current High Temperature Design Methodology Based on Structural Failure Tests
,”
June
1985
,
ASME B&PV Code SG-ETD Meeting Minutes
.
26.
Corum
,
J. M
. “
What Evidence Do We Have For or Against Current Linear Damage Procedure?
November
1987
,
ASME B&PV Code SG-ETD Meeting Minutes
.
27.
Chow
,
J. G. Y.
,
Hare
,
J. R.
,
Jones
,
R. H.
, and
Tremel
, “
Quarterly Progress Report on High Cycle Fatigue of LMFBR Materials
,”
BNL 50363
,
October
1972
.
28.
Weeks
,
R. W.
,
Dierks
,
D. R.
, and
Cheng
,
C. F.
, “
ANL Low-Cycle Fatigue Studies–Program, Results, and Analysis
,”
U.S. AEC Report ANL-8009
,
March
1973
.
29.
ASME Boiler & Pressure Vessel Code Section III, Division 1, Criteria of the ASME Boiler and Pressure Vessel Code for Design by Analysis
;
The American Society of Mechanical Engineers
.
30.
1974 ASME Boiler & Pressure Vessel Code, Case Interpretations, Code Case 1593–Fabrication and Installation
;
American Society of Mechanical Engineers
.
31.
Severud
,
L. K.
, “
Creep-Fatigue Assessment Methods Using Elastic Analysis Results and Adjustments
,”
Trans ASME, Journal of Pressure Vessel Technology
,
February
1991
, Vol.
113
, pp.
34
40
.
32.
Berman
,
I.
, and
Gupta
,
G. D.
, “
Buckling Rules for Nuclear Components
,”
Journal of Pressure Vessel Technology
, Vol.
98
,
Series J
, No.
3
,
August
1976
, pp.
229
231
.
33.
Background Document Update, working document prepared for ASME B&PV Code SG-ETD
.
34.
Griffin
,
D. S.
, “
Design Limits for Creep Buckling of Structural Components
,”
Creep in Structures, 3rd IUTAM Symposium
,
Leicester, UK
,
September
1980
, pp.
331
348
.
35.
Griffin
,
D. S.
, “
Temperature Limits for ASME Boiler & Pressure Vessel Code External Pressure Design Charts
,”
PVRC Grant 92–06, Submitted January 1994 (revised March 1996)
.
36.
Corum
,
J. M.
, “
Evaluation of Weldment Creep and Fatigue Strength-Reduction Factors for Elevated Temperature Design
,”
PVP–Vol. 163, Structural Design for Elevated Temperature Environments–Creep, Ratchet, Fatigue, and Fracture, Book No. H00478-1989
.
37.
Robinson
,
E. A.
, “Steam-Piping Design to Minimize Creep Concentrations,”
ASME Transactions
,
1955
, pp.
1147
1162
.
38.
Iida
,
K.
,
Asada
,
Y.
,
Okabayashi
,
K.
, and
Nagata
,
T.
, “
Simplified Analysis and Design for Elevated Temperature Components of Monju
,”
Nuclear Engineering and Design 98
(
1987
), pp.
305
317
.
39.
Recommended Practices in Elevated Temperature Design: A Compendium of Breeder Reactor Experience (1970–1987) Volume II–Preliminary Design and Simplified Methods
,”
WRC Bulletin 363
,
May
1991
.
40.
Takakura
,
K.
,
Ueta
,
M.
,
Ichimiya
,
M.
,
Hirayama
,
H.
,
Ueno
,
T.
,
Wade
,
H.
,
Ozaki
,
H.
, and
Ohsaki
,
T.
, “
Development of Elevated Structural Design Guide for Japanese Demonstration Breeder Reactor
,”
Nuclear Engineering and Design
155
,
1995
, pp.
559
570
.
41.
Becht
IV,
C.
, “
Behavior of Pressure-Induced Discontinuity Stresses at Elevated Temperatures
,”
Trans ASME, Journal of Pressure Vessel Technology
, Vol.
111
,
August
1989
, pp.
322
325
.
42.
Corum
,
J.
,
Gwaltney
,
R.
, and
Lin
,
Y.
, “Further Analytical Study of Relaxation of Discontinuity Stresses,”
Report for ASME Subgroup on Elevated Temperature Design
,
November
1985
43.
Recommended Practices in Elevated Temperatures Design: A Compendium of Breeder Reactor Experience (1970–1987) Volume IV–Special Topics
,”
WRC Bulletin 366
,
August
1991
.
44.
U.S. Energy Research and Development Administration
,
RDT Standard F9–4
.
45.
U.S. Energy Research and Development Administration
, “
Guidelines and Procedures for Design and Nuclear Systems Components at Elevated Temperature
,”
RDT Standard F9–5T
.
46.
Brinkman
,
C. R.
,
Sikka
,
V. K.
, and
Booker
,
B. L. P.
, “
Optimized Specifications for Type 304 and 316 Stainless Steel in Long-Term High-Temperature Service Applications
,”
Oak Ridge National Laboratory
,
ORNL-6005
,
1984
.
47.
Moen
,
R. A.
, and
Smith
,
G. V.
, “
A Consideration on Limits of Cold Working in Nuclear Construction
,”
Trans ASME, Journal of Materials Technology
,
April
1975
, pp.
162
171
.
48.
Gold
,
M.
,
Lyda
,
W. E.
, and
Zeisloff
,
R. H.
, “
The Effect of Varying Degrees of Cold Work on the Stress-Rupture Properties of Type 304 Stainless Steel
,”
Trans ASME, Journal of Engineering and Technology
,
October
1975
, pp.
305
212
.
49.
Moen
,
R. A.
, and
Farwick
,
D. G.
, “
Limiting Recrystallization in Austenitic Stainless Steels for Structural Applications
,”
HEDLSA-1332FP, Characterization of Materials for Service at Elevated Temperature, MPC-7, PVP/MPC Symposium
,
Montreal
,
June 1978
.
50.
Roberts
,
D. I.
, “
Background on Cold Work Limits
,”
Letter to R. I. Jetter, ASME B&PV Code WG–Material Behavior (SG-ETD)
,
July
8
,
1986
.
51.
Leyda
,
W. E.
, “
The Effect of Cold Work on the Mechanical Properties of 2¼Cr-Mo Steel
,”
Literature Search for ASME B&PV Code WG–Materials Behavior (SG-ETD)
,
September
23
,
1976
.
52.
2011a Addenda ASME Boiler & Pressure Vessel Code Section III, Division 1 Subsection NB, Class 1 Components
;
American Society of Mechanical Engineers
.
53.
2011a Addenda ASME Boiler & Pressure Vessel Code Section III, Division 1 Subsection NC, Class 2 Components
;
American Society of Mechanical Engineers
.
54.
ASME Boiler & Pressure Vessel Code, Code Cases–Nuclear Service, Code Case N-253-14, Construction of Class 2 or Class 3 Components for Elevated Temperature Service
;
American Society of Mechanical Engineers
.
55.
ASME Boiler & Pressure Vessel Code, Code Cases–Nuclear Service, Code Case N-290-1 Expansion Joints in Class 1, Liquid Metal Piping
;
American Society of Mechanical Engineers
.
56.
Jaquay
,
K.
, and
Bigelow
,
C.
, “Summary of the U.S. DOE LMR Flexible Pipe Joint Development Program,”
Metallic Bellows and Expansion Joints
,
PVP Vol. 168
, pp.
1
6
,
American Society of Mechanical Engineers
,
1989
.
57.
.
Tsukimori
,
K.
,
Yamashita
,
T.
,
Iwata
,
K.
, and
Imazu
,
A.
, “
Development of FBR Piping Bellows Joints in Japan
,”
Nuclear Engineering and Design
,
155
,
1995
, pp.
571
589
.
58.
Wang
,
Y.
,
Jetter
,
R. I.
,
Baird
,
S. T.
,
Pu
,
C.
and
Sham
,
T.-L.
(
2015a
): “
Report on FY15 Alloy 617 SMT Creep-Fatigue Test Results
ORNL/TM-2015/300
,
Oak Ridge National Laboratory
,
Oak Ridge, TN
., http://info.ornl.gov/sites/publications/Files/Pub56336.pdfhttp://info.ornl.gov/sites/publications/Files/Pub56336.pdf
59.
Wang
,
Y.
,
Jetter
,
R. I.
,
Baird
,
S. T.
,
Pu
,
C.
and
Sham
,
T.-L.
(
2015b
), “
Report on FY15 Two Bar Thermal Ratcheting Test Results
ORNL/TM-2015/284
,
Oak Ridge National Laboratory
,
Oak Ridge, TN
., http://info.ornl.gov/sites/publications/Files/Pub56202.pdfhttp://info.ornl.gov/sites/publications/Files/Pub56202.pdf
60.
ASME Boiler and Pressure Vessel Code Cases—Nuclear Service, Code Case N-861, “Satisfaction of Strain Limits for Division 5 Class A Components at Elevated Temperature Service Using Elastic-Perfectly Plastic Analysis.”
61.
ASME Boiler and Pressure Vessel Code Cases—Nuclear Service, Code Case N-862, “Calculation of Creep-Fatigue for Division 5 Class A Components at Elevated Temperature Service Using Elastic-Perfectly Plastic Analysis.”
62.
Carter
,
P.
, (
2005
), “
Analysis of cyclic creep and rupture. Part 1: Bounding Theorems and Cyclic Reference Stresses
,”
Int. J Press & Piping
, Vol.
82
, pp.
15
26
.
63.
Carter
,
P.
,
Jetter
,
R.
, and
Sham
,
T.-L.
, (
2012a
), “
Application of Elastic-Perfectly Plastic Cyclic Analysis to Assessment of Creep Strain
”,
PVP 2012-78082
,
American Society of Mechanical Engineers
,
New York, NY
.
64.
Carter
,
P.
,
Sham
,
T-L.
, and
Jetter
,
R.
, “
Overview of Proposed High Temperature Design Code Cases
,”
PVP2016-63559
,
American Society of Mechanical Engineers
,
New York, NY
.
65.
Background information provided via personal communications with Dr. Robert L. Bratton, member of the BPV III Subgroup on Graphite Core Components
.
66.
The Subgroup on Graphite Core Components decided to define ‘construction’ differently than Division 1 as “All operations required to build the Graphite Core Assembly (manufacture materials, machine Graphite Core Components and install) in accordance with Design Drawings and the Construction Specification.” Hence, design and construction are two distinct terms for graphite
.
67.
ASME Standards Technology, LLC,
Graphite for High Temperature Gas-Cooled Nuclear Reactors
,”
STP-NU-009
,
September
2008
.
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal