Skip Nav Destination
ASME Press Select Proceedings
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3Available to Purchase
By
ISBN:
9780791859810
No. of Pages:
906
Publisher:
ASME Press
Publication date:
2011
eBook Chapter
70 Auto Tracking Robot Using Control System on FPGA Available to Purchase
By
Vu Duc Lung
Vu Duc Lung
University of Information Technology — Vietnam National University
, Ho Chi Minh City
; [email protected]
Search for other works by this author on:
Page Count:
5
-
Published:2011
Citation
Lung, VD. "Auto Tracking Robot Using Control System on FPGA." International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3. Ed. Xie, Y. ASME Press, 2011.
Download citation file:
This paper presents an auto tracking robot using the control system on FPGA in the Development and Education Kit (DE2). There are three components of hardware: Canon Digital DCUS40 camera, DE2 board and a Robot whose front wheel can rotate freely and two rear ones are fixed in the motor. The images received from the Camera are transferred to the tracking system on DE2 FPGA. These images are processed afterward by the image processing module to determine where the color object is and what its relational properties are. After that the output of the image processing module sent to the neural network module and states machine to determine the velocity control signals and navigate control signals.
Abstract
Key Words
1. Introduction
2. System Model
3. Results
4. Summaries
References
This content is only available via PDF.
You do not currently have access to this chapter.
Email alerts
Related Chapters
Gesture Based Computing via Gesture Humanoid
International Conference on Computer and Automation Engineering, 4th (ICCAE 2012)
Spiking Neural Networks on Self-Updating System-on-Chip for Autonomous Control
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Accuracy-associated Models
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy
Design of a Locomotion Control System for Chinese Medical Massage Robot
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Related Articles
A Repetitive Learning Method Based on Sliding Mode for Robot Control
J. Dyn. Sys., Meas., Control (March,2000)
A Geometric Path Planner for Car-like Robots
J. Mech. Des (September,2000)
Enjoying the Research Journey
J. Mechanisms Robotics (February,2010)