Skip to Main Content
ASME Press Select Proceedings

International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3

By
Yi Xie
Yi Xie
Search for other works by this author on:
ISBN:
9780791859810
No. of Pages:
906
Publisher:
ASME Press
Publication date:
2011

In order to resolve the challenge that the load's swing angle and swing angle-velocity of overhead crane or gantry crane were hard to be measured directly in engineering practice, the state observer was designed by using trolley's position information, and estimate the load's swing angle and angle-velocity. The difference value between the state observer's output and the trolley-load system's output was introduced and adjusted by the observer's gain vector, then sent to the observer's input terminal. After the observer's poles were placed on complex plane, the system can estimate the swing angle and swing angle-velocity stably and quickly. Simulation study shows that the method of obtaining load's swing angle information based on state estimation is practicable, and state observer can be available online in 2s, which has strong robust property; along with rising of the pole number, state observer can be adaptive more widely in the changing of load mass and rope length; however, estimation error will change roughly when the pole number is too big; observer is more sensitive to rope length than to load mass.

This content is only available via PDF.
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal