Skip to Main Content
Skip Nav Destination
ASME Press Select Proceedings
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Editor
Garry Lee
Garry Lee
Information Engineering Research Institute
Search for other works by this author on:
ISBN:
9780791859896
No. of Pages:
906
Publisher:
ASME Press
Publication date:
2011

Deformation behavior of steel 33Mn2v for oil well tube was studied by hot compression tests conducted at various temperatures and strain rates. The Kumar model was developed to predict the hot deformation behavior of steel 33Mn2V for oil well tube. In this regard, the hot compression tests were carried out at the temperatures from 750°C to 1200°C and at the strain rates of 0.02s—1 to 0.16 s—1. The experimental data were then used to determine the constants of developed constitutive equations. The Kumar model can be represented by Zener-Hollomon parameter in a hyperbolic sinusoidal equation form. The apparent activation energy of deformation is calculated to be 342.1481kJ/Mol. Dynamic recrystallization of steel 33Mn2V occur and the completion of the critical deformation is small, termination error and the initial deformation is smaller. Therefore, it's easy for the steel 33Mn2V to the occurrence and completion of dynamic recrystallization.

Abstract
Keywords
Introduction
Experimental Procedures
Results and Discussion
Acknowledgments
Conclusions
References
This content is only available via PDF.
You do not currently have access to this chapter.
Close Modal

or Create an Account

Close Modal
Close Modal