Modeling and control of the gas exchange process in modern diesel engines is critical for the promotion and control of advanced combustion strategies. However, most modeling efforts to date use complex stand-alone simulation packages that are not easily integrated into, or amenable for the synthesis of, engine control systems. Simpler control-oriented models have been developed; however, in many cases, they do not directly capture the complete dynamic interaction of air handling system components and flows in multicylinder diesel engines with variable geometry turbocharging (VGT), high pressure exhaust gas recirculation (EGR), and flexible intake valve actuation. Flexibility in the valvetrain directly impacts the gas exchange process not only through the effect on volumetric efficiency but also through the combustion process and resulting exhaust gas enthalpy utilized to drive the turbomachinery. This paper describes a low-order, five state model of the air handling system for a multicylinder variable geometry turbocharged diesel engine with cooled EGR and flexible intake valve actuation, validated against 286 steady state and 62 transient engine operating points. The model utilizes engine speed, engine fueling, EGR valve position, VGT nozzle position, and intake valve closing (IVC) time as inputs to the model. The model outputs include calculation of the engine flows as well as the exhaust temperature exiting the cylinders. The gas exchange model captures the dynamic effects of the not only the standard air handling actuators (EGR valve position and VGT position) but also IVC timing, exercised over their useful operating ranges. The model's capabilities are enabled through the use of analytical functions to describe the performance of the turbocharger, eliminating the need to use look-up maps; a physically based control-oriented exhaust gas enthalpy submodel and a physically based volumetric efficiency submodel.
Skip Nav Destination
Article navigation
November 2014
Technical Briefs
Control-Oriented Gas Exchange Model for Diesel Engines Utilizing Variable Intake Valve Actuation
Lyle Kocher,
Lyle Kocher
1
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: kocherl@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: kocherl@purdue.edu
1Corresponding author.
Search for other works by this author on:
Ed Koeberlein,
Ed Koeberlein
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: ekoeberl@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: ekoeberl@purdue.edu
Search for other works by this author on:
Karla Stricker,
Karla Stricker
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: kcstrick@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: kcstrick@purdue.edu
Search for other works by this author on:
D. G. Van Alstine,
D. G. Van Alstine
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: dvanalst@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: dvanalst@purdue.edu
Search for other works by this author on:
Greg Shaver
Greg Shaver
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: gshaver@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: gshaver@purdue.edu
Search for other works by this author on:
Lyle Kocher
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: kocherl@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: kocherl@purdue.edu
Ed Koeberlein
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: ekoeberl@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: ekoeberl@purdue.edu
Karla Stricker
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: kcstrick@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: kcstrick@purdue.edu
D. G. Van Alstine
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: dvanalst@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: dvanalst@purdue.edu
Greg Shaver
Ray W. Herrick Laboratories,
Department of Mechanical Engineering,
e-mail: gshaver@purdue.edu
Department of Mechanical Engineering,
Purdue University
,West Lafayette, IN 47907
e-mail: gshaver@purdue.edu
1Corresponding author.
Contributed by the Dynamic Systems Division of ASME for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received October 24, 2011; final manuscript received April 25, 2014; published online August 8, 2014. Assoc. Editor: Eric J. Barth.
J. Dyn. Sys., Meas., Control. Nov 2014, 136(6): 064501 (9 pages)
Published Online: August 8, 2014
Article history
Received:
October 24, 2011
Revision Received:
April 25, 2014
Citation
Kocher, L., Koeberlein, E., Stricker, K., Van Alstine, D. G., and Shaver, G. (August 8, 2014). "Control-Oriented Gas Exchange Model for Diesel Engines Utilizing Variable Intake Valve Actuation." ASME. J. Dyn. Sys., Meas., Control. November 2014; 136(6): 064501. https://doi.org/10.1115/1.4027960
Download citation file:
Get Email Alerts
Cited By
Offline and online exergy-based strategies for hybrid electric vehicles
J. Dyn. Sys., Meas., Control
Optimal Control of a Roll-to-Roll Dry Transfer Process With Bounded Dynamics Convexification
J. Dyn. Sys., Meas., Control (May 2025)
In-Situ Calibration of Six-Axis Force/Torque Transducers on a Six-Legged Robot
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control
Related Articles
Control of Charge Dilution in Turbocharged Diesel Engines via Exhaust Valve Timing
J. Dyn. Sys., Meas., Control (September,2005)
Computationally Efficient Whole-Engine Model of a Cummins 2007 Turbocharged Diesel Engine
J. Eng. Gas Turbines Power (February,2010)
Air System and Diesel Combustion Modeling for Hardware in the Loop Applications
J. Eng. Gas Turbines Power (April,2012)
Adaptive Air Charge Estimation for Turbocharged Diesel Engines Without Exhaust Gas Recirculation
J. Dyn. Sys., Meas., Control (September,2004)
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
A Simple Carburetor
Case Studies in Fluid Mechanics with Sensitivities to Governing Variables
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students