The goal of this paper is to identify the dominant factors that should be included in a control oriented model in order to predict the start of combustion in a homogeneous charge compression ignition (HCCI) engine. Qualitative and quantitative information on the individual effects of fuel and exhaust gas recirculation on the HCCI combustion is provided. Using sensitivity analysis around a wide range of operating conditions of a single-cylinder port-injection gasoline HCCI engine, we find that temperature is the dominant factor in determining the start of combustion. Charge temperature thus becomes the “spark” in a HCCI engine. Therefore, a model without the composition terms should be adequate for model based regulation of the combustion timing in a port-injection gasoline HCCI engine with high dilution from the exhaust.
Skip Nav Destination
e-mail: [email protected]
e-mail: [email protected]
Article navigation
January 2009
Technical Briefs
Sensitivity Analysis of Combustion Timing of Homogeneous Charge Compression Ignition Gasoline Engines Available to Purchase
Chia-Jui Chiang,
Chia-Jui Chiang
Department of Mechanical Engineering,
e-mail: [email protected]
National Taiwan University of Science and Technology
, Taipei, Taiwan, 10607 R.O.C
Search for other works by this author on:
Anna G. Stefanopoulou
Anna G. Stefanopoulou
Department of Mechanical Engineering,
e-mail: [email protected]
University of Michigan
, Ann Arbor, MI 48109
Search for other works by this author on:
Chia-Jui Chiang
Department of Mechanical Engineering,
National Taiwan University of Science and Technology
, Taipei, Taiwan, 10607 R.O.Ce-mail: [email protected]
Anna G. Stefanopoulou
Department of Mechanical Engineering,
University of Michigan
, Ann Arbor, MI 48109e-mail: [email protected]
J. Dyn. Sys., Meas., Control. Jan 2009, 131(1): 014506 (5 pages)
Published Online: December 5, 2008
Article history
Received:
December 12, 2005
Revised:
February 29, 2008
Published:
December 5, 2008
Citation
Chiang, C., and Stefanopoulou, A. G. (December 5, 2008). "Sensitivity Analysis of Combustion Timing of Homogeneous Charge Compression Ignition Gasoline Engines." ASME. J. Dyn. Sys., Meas., Control. January 2009; 131(1): 014506. https://doi.org/10.1115/1.2936877
Download citation file:
Get Email Alerts
3D Printed Servopumps for Soft Robots
J. Dyn. Sys., Meas., Control
Magnetic Torquers Actuated Satellite Attitude Control Using Linear Parameter Varying Techniques
J. Dyn. Sys., Meas., Control (September 2025)
On the Negative Imaginary Time-Delay Systems With Its Application to Flexible Systems Control
J. Dyn. Sys., Meas., Control (September 2025)
A Model-Based Method for In Situ Viscosity Measurement With Continuous-Wave Ultrasound
J. Dyn. Sys., Meas., Control (September 2025)
Related Articles
Mean Value Modeling and Analysis of HCCI Diesel Engines With External Mixture Formation
J. Dyn. Sys., Meas., Control (January,2009)
Computationally Efficient Whole-Engine Model of a Cummins 2007 Turbocharged Diesel Engine
J. Eng. Gas Turbines Power (February,2010)
Exhaust-Stream and In-Cylinder Measurements and Analysis of the Soot Emissions From a Common Rail Diesel Engine Using Two Fuels
J. Eng. Gas Turbines Power (November,2010)
Related Proceedings Papers
Related Chapters
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
Lay-Up and Start-Up Practices
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration
Introduction
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration