This paper presents a novel multiaxis positioner that operates on the magnetic-levitation (maglev) principle. This maglev stage is capable of positioning at the resolution of a few nanometers over a planar travel range of several millimeters. A novel actuation scheme was developed for the compact design of this stage that enables six-axis force generation with just three permanent magnets. We calculated the forces with electromagnetic analysis over the whole travel range and experimentally verified them with a unit actuator. The single-moving part, namely, the platen, is modeled as a pure mass due to the negligible effect of magnetic spring and damping. There are three laser interferometers and three capacitance sensors to sense the six-axis position/rotation of the platen. A lead-lag compensator was designed and implemented to control each axis. A nonlinear model of the force was developed by electromagnetic analysis, and input current linearization was applied to cancel the nonlinearity of the actuators over the extended travel range. Various experiments were conducted to test positioning and loading capabilities. The single-moving platen can carry and precisely position an additional payload of . Its potential applications include semiconductor manufacturing, microfabrication and assembly, nanoscale profiling, and nanoindentation.
Skip Nav Destination
e-mail: wjkim@tamu.edu
Article navigation
November 2007
Technical Papers
Multiaxis Maglev Positioner With Nanometer Resolution Over Extended Travel Range
Won-jong Kim,
Won-jong Kim
Mem. ASME
Department of Mechanical Engineering,
e-mail: wjkim@tamu.edu
Texas A&M University
, College Station, TX 77843-3123
Search for other works by this author on:
Shobhit Verma
Shobhit Verma
Department of Mechanical Engineering,
Texas A&M University
, College Station, TX 77843-3123
Search for other works by this author on:
Won-jong Kim
Mem. ASME
Department of Mechanical Engineering,
Texas A&M University
, College Station, TX 77843-3123e-mail: wjkim@tamu.edu
Shobhit Verma
Department of Mechanical Engineering,
Texas A&M University
, College Station, TX 77843-3123J. Dyn. Sys., Meas., Control. Nov 2007, 129(6): 777-785 (9 pages)
Published Online: January 23, 2007
Article history
Received:
March 10, 2006
Revised:
January 23, 2007
Citation
Kim, W., and Verma, S. (January 23, 2007). "Multiaxis Maglev Positioner With Nanometer Resolution Over Extended Travel Range." ASME. J. Dyn. Sys., Meas., Control. November 2007; 129(6): 777–785. https://doi.org/10.1115/1.2789468
Download citation file:
Get Email Alerts
An Adaptive Sliding-Mode Observer-Based Fuzzy PI Control Method for Temperature Control of Laser Soldering Process
J. Dyn. Sys., Meas., Control
Fault detection of automotive engine system based on Canonical Variate Analysis combined with Bhattacharyya Distance
J. Dyn. Sys., Meas., Control
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control (July 2025)
Related Articles
Design and Simulation of Three Degrees-of-Freedom Tracking Systems for Capsule Endoscope
J. Dyn. Sys., Meas., Control (November,2016)
Design of a Xenia Coral Robot Using a High-Stroke Compliant Linear Electromagnetic Actuator
Letters Dyn. Sys. Control (July,2021)
Erratum: “Design and Simulation of Three Degrees-of-Freedom Tracking Systems for Capsule Endoscope” [ASME J. Dyn. Syst., Meas., Control, 2016, 138(11), p. 111002; DOI: 10.1115/1.4033830 ]
J. Dyn. Sys., Meas., Control (July,2018)
Nanoscale Motion Control With a Compact Minimum-Actuator Magnetic Levitator
J. Dyn. Sys., Meas., Control (September,2005)
Related Proceedings Papers
Related Chapters
Structure of Magnetic Actuator
Magnetic Bearings for Mechanical Cardiac Assist Devices
Driving Circuit Design of Magnetic Precision Stage
International Conference on Electronics, Information and Communication Engineering (EICE 2012)
Some Tricks of Modeling a Permanent Magnet Motor Using Finite Element Method
International Conference on Mechanical and Electrical Technology 2009 (ICMET 2009)