Motion control requirements in electronic manufacturing demand both higher speeds and greater precision to accommodate continuously shrinking part/feature sizes and higher densities. However, improving both performance criteria simultaneously is difficult because of resonances that are inherent to the underlying positioning systems. This paper presents an experimental study of a feedforward controller that was designed for a point-to-point motion control system on a modern and state of the art laser processing system for electronics manufacturing. We systematically apply model identification, inverse dynamics control, iterative refinement (to address modeling inaccuracies), and adaptive least mean square to achieve high speed trajectory tracking. The key innovations lie in using the identified model to generate the gradient descent used in the iterative learning control, encoding the result from the learning control in a finite impulse response filter and adapting the finite impulse response coefficients during operation using the least-mean-square update based on position, velocity, and acceleration feedforward signals. Experimental results are provided to show the efficacy of the proposed approach, a variation of which has been implemented on the production machine.
Skip Nav Destination
e-mail: potsab@rpi.edu
e-mail: wenj@rpi.edu
Article navigation
November 2007
Technical Papers
High Performance Motion Tracking Control for Electronic Manufacturing
Benjamin Potsaid,
Benjamin Potsaid
Center for Automation Technologies and Systems (CATS),
e-mail: potsab@rpi.edu
Rensselaer Polytechnic Institute
, Troy, NY 12180
Search for other works by this author on:
John Ting-Yung Wen,
John Ting-Yung Wen
Director
Center for Automation Technologies and Systems (CATS),
e-mail: wenj@rpi.edu
Rensselaer Polytechnic Institute
, Troy, NY 12180
Search for other works by this author on:
Mehmet Alpay
Mehmet Alpay
Search for other works by this author on:
Benjamin Potsaid
Center for Automation Technologies and Systems (CATS),
Rensselaer Polytechnic Institute
, Troy, NY 12180e-mail: potsab@rpi.edu
John Ting-Yung Wen
Director
Center for Automation Technologies and Systems (CATS),
Rensselaer Polytechnic Institute
, Troy, NY 12180e-mail: wenj@rpi.edu
Mark Unrath
David Watt
Mehmet Alpay
J. Dyn. Sys., Meas., Control. Nov 2007, 129(6): 767-776 (10 pages)
Published Online: March 2, 2007
Article history
Received:
April 6, 2006
Revised:
March 2, 2007
Citation
Potsaid, B., Wen, J. T., Unrath, M., Watt, D., and Alpay, M. (March 2, 2007). "High Performance Motion Tracking Control for Electronic Manufacturing." ASME. J. Dyn. Sys., Meas., Control. November 2007; 129(6): 767–776. https://doi.org/10.1115/1.2789467
Download citation file:
Get Email Alerts
Fault detection of automotive engine system based on Canonical Variate Analysis combined with Bhattacharyya Distance
J. Dyn. Sys., Meas., Control
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control (July 2025)
Related Articles
The Application of Command Shaping to the Tracking Problem
J. Dyn. Sys., Meas., Control (May,2008)
Boosting Speed and Accuracy in Precision Motion Control
Mechanical Engineering (September,2018)
Optimal FIR Input Shaper Designs for Motion Control With Zero Residual Vibration
J. Dyn. Sys., Meas., Control (March,2011)
Dahl Model-Based Hysteresis Compensation and Precise Positioning Control of an XY Parallel Micromanipulator With Piezoelectric Actuation
J. Dyn. Sys., Meas., Control (July,2010)
Related Chapters
A Novel Approach for LFC and AVR of an Autonomous Power Generating System
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Phase Estimation Based Channel Equalization Technique for 64-QAM Communication
International Conference on Computer and Automation Engineering, 4th (ICCAE 2012)
An Adaptive Fuzzy Control for a Multi-Degree-of-Freedom System
Intelligent Engineering Systems Through Artificial Neural Networks, Volume 17