One of the main problems in high-speed train transportation systems is to counteract the fast variations of the contact force between the catenary and the pantograph collector end. The variation of the catenary equivalent stiffness, due to the suspending system, originates mechanical oscillations whose frequency and magnitude are larger and larger as the train speed increases. Such oscillations cause electric arcs that damage the mechanical structure and compromise the collection of the current from the supply wire, degradating the overall performance. Active pantographs offer the possibility of affecting the contact force evolution by suitably modifying a control torque applied at the lower arm of the pantograph. We consider the equivalent stiffness of the catenary as an uncertainty to compensate for by suitable robust control techniques, and, under the assumption that a noisy measure of the actual contact force is available, we propose an output-feedback control scheme based on higher-order sliding modes and high-gain observers. That combination allows for an almost-complete rejection of the undesired oscillations of the contact force, as confirmed by simulations, and is very attractive for real-time implementation purposes, due to its simplicity and robustness.
Skip Nav Destination
e-mail: pisano@diee.unica.it
e-mail: eusai@diee.unica.it
Article navigation
March 2004
Technical Papers
Output–Feedback Regulation of the Contact-Force in High-Speed Train Pantographs
Alessandro Pisano,
e-mail: pisano@diee.unica.it
Alessandro Pisano
Dipartimento di Ingegneria Elettrica ed Elettronica (DIEE), Universita´ di Cagliari-Piazza d’ Armi, 09123 Cagliari-Italy
Search for other works by this author on:
Elio Usai
e-mail: eusai@diee.unica.it
Elio Usai
Dipartimento di Ingegneria Elettrica ed Elettronica (DIEE), Universita´ di Cagliari-Piazza d’ Armi, 09123 Cagliari-Italy
Search for other works by this author on:
Alessandro Pisano
Dipartimento di Ingegneria Elettrica ed Elettronica (DIEE), Universita´ di Cagliari-Piazza d’ Armi, 09123 Cagliari-Italy
e-mail: pisano@diee.unica.it
Elio Usai
Dipartimento di Ingegneria Elettrica ed Elettronica (DIEE), Universita´ di Cagliari-Piazza d’ Armi, 09123 Cagliari-Italy
e-mail: eusai@diee.unica.it
Contributed by the Dynamic Systems, Measurement, and Control Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received by the ASME Dynamic Systems and Control Division June 24, 2002; final revision, August 12, 2003. Associate Editor: C. D. Rahn.
J. Dyn. Sys., Meas., Control. Mar 2004, 126(1): 82-87 (6 pages)
Published Online: April 12, 2004
Article history
Received:
June 24, 2002
Revised:
August 12, 2003
Online:
April 12, 2004
Citation
Pisano, A., and Usai, E. (April 12, 2004). "Output–Feedback Regulation of the Contact-Force in High-Speed Train Pantographs ." ASME. J. Dyn. Sys., Meas., Control. March 2004; 126(1): 82–87. https://doi.org/10.1115/1.1649973
Download citation file:
Get Email Alerts
Offline and Online Exergy-Based Strategies for Hybrid Electric Vehicles
J. Dyn. Sys., Meas., Control (May 2025)
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control
A Distributed Layered Planning and Control Algorithm for Teams of Quadrupedal Robots: An Obstacle-Aware Nonlinear Model Predictive Control Approach
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-Enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control (May 2025)
Related Articles
Guaranteed Cost Observer-Based Control for a Class of Uncertain Time-Delay Systems
J. Dyn. Sys., Meas., Control (December,2005)
Nonlinear Robust Output Stabilization for Mechanical Systems Based on Luenberger-Like Controller/Observer
J. Dyn. Sys., Meas., Control (August,2017)
Editorial
J. Dyn. Sys., Meas., Control (December,2000)
Output Feedback Adaptive Robust Control of Uncertain Linear Systems
With Disturbances
J. Dyn. Sys., Meas., Control (December,2006)
Related Proceedings Papers
Related Chapters
Fault-Tolerant Control of Sensors and Actuators Applied to Wind Energy Systems
Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems
Develop of New Online Logistics Learning Platform Features - Integration of the Taiwan Train Quality Scorecard and the Kano Model
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution