In this paper, the torque control of a harmonic drive system for constrained-motion and free-motion applications is examined in detail. A nominal model for the system is obtained in each case from experimental frequency responses of the system, and the deviation of the system from the model is encapsulated by a multiplicative uncertainty. Robust torque controllers are designed using this information in an -framework, and implemented on two different setups. From time and frequency domain experiments, it is shown that the closed-loop system retains robust stability, while improving the tracking performance exceptionally well. To further improve the performance of the system for free-motion case, a feedforward friction-compensation algorithm is implemented in addition to the robust torque control. It is shown that friction-compensation will shrink the model uncertainty at low frequencies and hence, the performance of the closed-loop system will be improved at those frequencies.
Issue Section:
Technical Papers
Keywords:
manipulators,
torque control,
optimal control,
robust control,
control system synthesis,
closed loop systems,
feedforward,
compensation,
Harmonic Drive,
Torque Sensing,
Torque Control,
H∞ Control,
Robust Control,
Nonlinear System,
Empirical Linear Model,
Multiplicative Uncertainty,
Friction-Compensation
1.
S. Nicosia and P. Tomei, 1988, “On the feedback linearization of robots with elastic joints,” Proceeding of IEEE Conference on Decision and Control, 1, pp. 180–185.
2.
Spong
, M. W.
, 1989
, “Adaptive control of flexible joint manipulators
,” Syst. Control Lett.
, 13
, No. 1
, pp. 15
–21
.3.
H. D. Taghirad and P. R. Belanger, 1996, “An experimental study on modelling and identification of harmonic drive systems,” Proceeding of IEEE Conference on Decision and Control, 4, pp. 4725–30, Dec.
4.
Volkov
, D. P.
, and Zubkov
, Y. N.
, 1978
, “Vibration in a drive with harmonic gear transmission
,” Russian Engineering Journal
,58
, No. 1
, pp. 17
–21
.5.
Taghirad
, H. D.
, and Belanger
, P. R.
, 1998
, “Modelling and parameter identification of harmonic drive systems
,” ASME J. Dyn. Syst., Meas., Control
, 120
, pp. 439
–444
.6.
Tuttle
, T. D.
, and Seering
, W. P.
, 1996
, “A nonlinear model of a harmonic drive gear transmission
,” IEEE Trans. Rob. Autom.
, 12
, No. 3
, pp. 368
–374
.7.
N. Kircanski, A. Goldenberg, and S. Jia, 1993, “An experimental study of nonlinear stiffness, hysteresis, and friction effects in robot joint with harmonic drives and torque sensors,” Proceedings of the Third International Symposium on Experimental Robotics, 1, pp. 147–154.
8.
M. M. Bridges, D. M. Dawson, and S. C. Martindale, 1993, “Experimental study of flexible joint robots with harmonic drive gearing,” Proceedings of the IEEE Conference on Control Applications, 2, pp. 499–504.
9.
K. Kaneko, T. Murakami, K. Ohnishi, and K. Komoriya, 1994, “Torque control with nonlinear compensation for harmonic drive DC motors,” IECON Proceedings, 2, pp. 1022–1027.
10.
Kazerooni
, H.
, 1995
, “Dynamics and control of instrumented harmonic drives
,” ASME J. Dyn. Syst., Meas., Control
, 117
, No. 1
, pp. 15
–19
.11.
N. Hogan, 1991, “Impedance control of robots with harmonic drive system,” Proceeding of the American Control Conference, 1, pp. 398–402.
12.
J. D. Chapel, 1991, “Attaining impedance control objectives using H∞ design methods,” Proceeding of IEEE International Conference on Robotics and Automation, 2, pp. 1482–87.
13.
Alter
, D. M.
, and Tsao
, T. C.
, 1996
, “Control of linear motors for machine tool feed drives: Design and implementation of H∞ optimal feedback control
,” ASME J. Dyn. Syst., Meas., Control
, 118
, No. 4
, pp. 649
–656
.14.
T. Kubo, G. Anwar, and M. Tomizuka, 1986, “Application of nonlinear friction compensation to robot arm control,” Proceeding of IEEE International Conference on Robotics and Automation, 1, pp. 722–727.
15.
Kang
, B. S.
, Kim
, S. H.
, Kwak
, Y. W.
, and Smith
, Craig S.
, 1999
, “Robust tracking control of a direct drive robot
,” ASME J. Dyn. Syst., Meas., Control
, 121
, pp. 261
–269
.16.
H. D. Taghirad, and P. R. Belanger, 1997, “Intelligent torque sensing and robust torque control of harmonic drive under free-motion,” Proceeding of IEEE International Conference on Robotics and Automation, 2, pp. 1749–54, April.
17.
H. D. Taghirad, and P. R. Belanger, 1997, Robust torque control of harmonic drive under constrained motion. Proceeding of IEEE International Conference on Robotics and Automation, 1, pp. 248–253, April.
18.
Taghirad, H. D., 1997, “On the robust h∞-based torque control of harmonic drive systems,” Technical Report TRCIM-97-05, Center for Intelligent Machines, McGill University, Apr.
19.
Taghirad
, H. D.
, Belanger
, P. R.
, and Helmy
, A.
, 1996
, “An experimental study on harmonic drive,” Technical Report Submitted to the International Submarine Engineering Ltd., Port Coquitlam, BC, Canada.
20.
Taghirad
, H. D.
, and Belanger
, P. R.
, 1998
, “Torque ripple and misallignment torque compensation for the built-in torque sensor of harmonic drive system
,” IEEE Trans. Instrum. Meas.
, 47
, No. 1
, pp. 309
–315
.21.
Signal Analysis Group, 1994, DSP Technology Inc. Siglab Version 1.0. DSP Technology Inc., 48500 Kato Road, Fremont, CA 94538-7385.
22.
H. D. Taghirad, 1997, “Robust torque control of harmonic drive systems,” PhD thesis, McGill University, Mar.
23.
Doyle
, J.
, Glover
, K.
, Khargonekar
, P. P.
, and Francis
, B. A.
, 1989
, “State-space solution to standard Hε and H∞ control problems
,” IEEE Trans. Autom. Control
, AC-34
, pp. 831
–847
.24.
P. R. Belanger, 1995, “Control engineering, a modern approach, Chapter 8,” Saunders College Publishing, 6277 Sea Harbor Drive, Orlando, FL.
25.
Zames
, G.
, 1996
, “On the input-output stability of time-varying nonlinear feedback systems
,” IEEE Trans. Autom. Control
, II
, pp. 228
–238
(part I), and 465–576 (Part II).26.
G. J. Balas, J. C. Doyle, K. Glover, A. Packard, and R. Smith, 1991, “μ-Analysis and Synthesis Toolbox,” The Math Works, Inc., P.O. Box 1337, Minneapolis, MN 55414-5377.
27.
Adams
, J.
, and Payandeh
, S.
, 1996
, “Methods for low-velocity friction compensation: theory and experimental study
,” J. Rob. Syst.
, 13
, pp. 391
–404
, June.28.
Armstrong-Helouvry
, B.
, Dupont
, P.
, and de Wit
, C. Canudas
, 1994
, “A survey of models, analysis tools and compensation methods for control of machines with friction
,” Automatica
, 30
, pp. 1083
–1138
.29.
Karnopp
, D.
, 1985
, “Computer simulation of stick-slip friction in mechanical dynamic systems
,” ASME J. Dyn. Syst., Meas., Control
, 107
, pp. 100
–103
.30.
H. D. Taghirad and P. R. Belanger, 1998, “Robust friction compensator for harmonic drive system,” Proceedings of the IEEE International Conference on Control Application, 1, pp. 547–551, Sept.
Copyright © 2001
by ASME
You do not currently have access to this content.
