In this paper, the nonlinear dynamics of a new Shape Memory Alloy (SMA) actuator that possesses impressive payload lifting capabilities are presented. This actuator consists of 48 SMA wires mechanically bundled in parallel forming one powerful muscle. It was designed to lift up to 45.4 kg (100 lbs), which is approximately 300 times its weight. This SMA actuator was tested in open-loop experiments with different loads and different inputs, such as step, ramp, sinusoid, and half sinusoid, and its dynamic characteristics were evaluated. An important observation made during the dynamic analysis was the unpredictability of the actuator’s response when low to moderate voltages were applied. This characteristic suggests possible chaotic behavior of the actuator, which could affect the system design and cause control difficulties in fine and high accuracy tasks. An investigation into chaos was conducted using time histories, phase plots, Poincare´ maps, and power spectrum density plots. As shown in the diagrams presented in this paper, system response to sinusoidal inputs with a larger mean voltage is periodic, whereas lower mean voltages produce unpredictable responses that indicate chaotic behavior.
Experimental Nonlinear Dynamics of a Shape Memory Alloy Wire Bundle Actuator
Contributed by the Dynamic Systems and Control Division for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received by the Dynamic Systems and Control Division March 13, 1999. Associate Editor: E. Fahrenthold.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Mosley, M. J., and Mavroidis, C. (March 13, 1999). "Experimental Nonlinear Dynamics of a Shape Memory Alloy Wire Bundle Actuator ." ASME. J. Dyn. Sys., Meas., Control. March 2001; 123(1): 103–112. https://doi.org/10.1115/1.1344243
Download citation file:
- Ris (Zotero)
- Reference Manager