In this article we present two nonlinear force controllers based on the sliding mode control theory. For this purpose we use the detailed mathematical model of the pneumatic system developed in the first part of the paper. The first controller is based on the complete model, and exhibits superior performance both in the numerical simulation and experiments, but requires complex online computations for the control law. The second controller neglects the valve dynamics and the time delay due to connecting tubes. The performance of this controller exhibits slight degradation for configurations with relatively short tubes, and at frequencies up to 20 Hz. At higher frequencies or when long connecting tubes are used, however, the performance exhibits significant degradation compared to the one provided by the full order controller. [S0022-0434(00)00703-6]
Skip Nav Destination
Article navigation
September 2000
Technical Papers
A High Performance Pneumatic Force Actuator System: Part II—Nonlinear Controller Design
Edmond Richer,
Edmond Richer
Southern Methodist University, School of Engineering and Applied Science, Mechanical Engineering Department, Dallas, TX 75275
Search for other works by this author on:
Yildirim Hurmuzlu
Yildirim Hurmuzlu
Southern Methodist University, School of Engineering and Applied Science, Mechanical Engineering Department, Dallas, TX 75275
Search for other works by this author on:
Edmond Richer
Southern Methodist University, School of Engineering and Applied Science, Mechanical Engineering Department, Dallas, TX 75275
Yildirim Hurmuzlu
Southern Methodist University, School of Engineering and Applied Science, Mechanical Engineering Department, Dallas, TX 75275
Contributed by the Dynamic Systems and Control Division for publication in the JOURNAL OF DYNAMIC SYSTEMS, MEASUREMENT, AND CONTROL. Manuscript received by the Dynamic Systems and Control Division June 23, 1999. Associate Technical Editor: S. Nair.
J. Dyn. Sys., Meas., Control. Sep 2000, 122(3): 426-434 (9 pages)
Published Online: June 23, 1999
Article history
Received:
June 23, 1999
Citation
Richer, E., and Hurmuzlu, Y. (June 23, 1999). "A High Performance Pneumatic Force Actuator System: Part II—Nonlinear Controller Design ." ASME. J. Dyn. Sys., Meas., Control. September 2000; 122(3): 426–434. https://doi.org/10.1115/1.1286366
Download citation file:
Get Email Alerts
An Adaptive Sliding-Mode Observer-Based Fuzzy PI Control Method for Temperature Control of Laser Soldering Process
J. Dyn. Sys., Meas., Control
Fault detection of automotive engine system based on Canonical Variate Analysis combined with Bhattacharyya Distance
J. Dyn. Sys., Meas., Control
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control (July 2025)
Related Articles
Regularization Embedded Nonlinear Control Designs for Input-Constrained and Ill-Conditioned Thermal System
J. Dyn. Sys., Meas., Control (September,2004)
A Temperature-based Controller for a Shape Memory Alloy Actuator
J. Vib. Acoust (June,2005)
Sliding Mode Control of a 2DOF Planar Pneumatic Manipulator
J. Dyn. Sys., Meas., Control (March,2009)
A Unified Force Controller for a Proportional-Injector Direct-Injection Monopropellant-Powered Actuator
J. Dyn. Sys., Meas., Control (March,2006)
Related Proceedings Papers
Related Chapters
Fault-Tolerant Control of Sensors and Actuators Applied to Wind Energy Systems
Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Station Automation
Pipeline System Automation and Control