Parts made by Layered Manufacturing (LM) have a limited surface accuracy and their build time is often long due to the deposition of sacrificial support structure. However, LM machines with an ability to deposit along multiple directions can improve upon the surface quality and reduce the support volume. In this paper we analyze the problem of multi-direction slicing. This analysis addresses the questions: How much of a part should be made along a particular direction and why. The strategy used in multi-direction slicing is to progressively decompose the part into sub-volumes, each of which can be completely built along a certain direction. Key issues are identified and a task framework for multidirection slicing is proposed. Algorithms and implemented examples are presented.

1.
Kao, J. H., Pinnilla, J. M., and Prinz, F., 1998, “Evolution of Process Planning for Solid Freeform Planning,” AUTOFACT-98, Detroit, Michigan.
2.
Mazumder
,
J.
,
Choi
,
J.
,
Nagarathnam
,
K.
,
Koch
,
J.
, and
Hetzner
,
D.
,
1997
, “
Direct Metal Deposition of H13 Tool Steel for 3-D Components
,”
JOM
,
49
, No.
5
, pp.
55
60
.
3.
Griffith, M. L., Keicher, D. L., Romero, J. T., Smugeresky, J. E., Atewood, C. L., Harwell, L. D., and Greene, D. L., 1996, “Laser Engineered Net Shaping (LENS) for Fabrication of Metallic Components,” Proceedings of the 1996 ASME International Mechanical Engineering Congress and Exposition, Atlanta, GA.
4.
Marsan, A., and Dutta, D., 1997, “Survey of Process Planning Techniques for Layered Manufacturing,” Proceedings of the 1997 ASME Design Engineering Technical Conference, Sacramento, CA.
5.
Alexander
,
P.
,
Allen
,
S.
, and
Dutta
,
D.
,
1998
, “
Part Orientation and Build Cost Determination in Layered Manufacturing
,”
Computer-Aided Design
,
30
, No.
5
, pp.
343
358
.
6.
Arcella, F. G., Albott, D. H., and House, M. A., “Rapid Laser Forming of Titanium Structures,” http://www.aerometcorp.com/rapid_laser_paper.htm.
7.
Elber, G., 1999, “Computation of Isoclines of Freeform Parametric Surfaces,” preprint.
8.
Tokuyama
,
Y.
, and
Bae
,
S.
,
1999
, “
An Approximate Method for Generating Draft on a Freeform Surface
,”
Visual Comput.
,
15
, pp.
1
8
.
9.
Majhi, J., Janardan, R., Smid, M., and Gupta, P., 1997, “On Some Geometric Optimization Problems in Layered Manufacturing,” Technical Report No. TR 97-002, Department of Computer Science, University of Minnesota.
10.
Kulkarni, P., and Dutta, D., 1999, “Deposition Strategies and Part Stiffness in Layered Manufacturing,” ASME J. Manuf. Sci. Eng., pp.93–103.
11.
Gupta
,
P.
,
Janardan
,
R.
,
Majhi
,
J.
, and
Woo
,
T.
,
1996
, “
Efficient Geometric Algorithms for Workpiece Orientation in 4- and 5-axis NC Machining
,”
Computer-Aided Design
,
28
, No.
8
, pp.
577
587
.
12.
Woo
,
T. C.
,
1994
, “
Visibility Maps and Spherical Algorithms
,”
Computer-Aided Design
,
26
, No.
1
, pp.
6
16
.
13.
Elber, G., and Cohen, E., 1995, “Arbitrarily Precise Computation of Gauss Maps and Visibility Sets for Freeform Surfaces,” The Third ACM/IEEE Symposium on Solid Modeling and Applications; Salt Lake City, Utah, pp. 271–279.
14.
Lee
,
Y. S.
, and
Chang
,
Tien-Chien
,
1995
, “
2-Phase Approach to Global Tool Interference Avoidance in 5-Axis Machining
,”
Computer-Aided Design
,
27
, No.
10
, pp.
715
729
.
15.
Elber
,
G.
, and
Cohen
,
E.
,
1999
, “
A Unified Approach to Accessibility in 5-axis Free-Form Milling Environments
,”
Computer-Aided Design
,
31
, No.
13
, pp.
795
804
.
16.
Qian, X., and Dutta, D., 1999, “Feature Based Fabrication in Layered Manufacturing,” preprint, submitted to ASME J. Mech. Des.
17.
Cormen, T. H., Leiserson, C. E., and Rivest, R. L., 1995, Introduction to Algorithms, McGraw-Hill Book Company.
You do not currently have access to this content.