Reduced order models (ROMs) of turbine bladed disks (blisks) are essential to quickly yet accurately characterize vibration characteristics and effectively design for high cycle fatigue. Modeling blisks with contacting shrouds at adjacent blades is especially challenging due to friction damping and localized nonlinearities at the contact interfaces which can lead to complex stick–slip behavior. While well-known techniques such as the harmonic balance method (HBM) and Craig–Bampton component mode synthesis (CB-CMS) have generally been employed to generate ROMs in the past, they do not reduce degrees-of-freedom (DoFs) at the interfaces themselves. In this paper, we propose a novel method to obtain a set of reduction basis functions for the contact interface DoFs as well as the remaining DoFs called “adaptive microslip projection” (AMP). The method is based on analyzing a set of linear systems with specifically chosen boundary conditions on the contact interface. Simulated responses of full order baseline models and the novel ROMs under various conditions are studied. Results obtained from the ROMs compare very favorably with the baseline model. This study addresses the case of a shrouded blisk in microslip close to stick. The AMP procedure may be possibly applied to other systems with Coulomb friction contacts, but its accuracy and effectiveness will need to be evaluated separately.

References

References
1.
Srinivasan
,
A. V.
,
1997
, “
Flutter and Resonant Vibration Characteristics of Engine Blades
,”
ASME J. Eng. Gas Turbines Power
,
119
(
4
), pp.
742
775
.
2.
Ewins
,
D. J.
,
2010
, “
Control of Vibration and Resonance in Aero Engines and Rotating Machinery—An Overview
,”
Int. J. Pressure Vessels Piping
,
87
(
9
), pp.
504
510
.
3.
Castanier
,
M. P.
, and
Pierre
,
C.
,
2002
, “
Using Intentional Mistuning in the Design of Turbomachinery Rotors
,”
AIAA J.
,
40
(
10
), pp.
2077
2086
.
4.
Kielb
,
R. E.
,
Hall
,
K. C.
,
Hong
,
E.
, and
Pai
,
S. S.
,
2006
, “
Probabilistic Flutter Analysis of a Mistuned Bladed Disk
,”
ASME
Paper No. GT2006-90847.
5.
Bladh
,
R.
,
Castanier
,
M. P.
, and
Pierre
,
C.
,
2001
, “
Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks—Part I: Theoretical Models
,”
ASME J. Eng. Gas Turbines Power
,
123
(
1
), pp.
89
99
.
6.
Bladh
,
R.
,
Castanier
,
M. P.
, and
Pierre
,
C.
,
2001
, “
Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks—Part II: Application
,”
ASME J. Eng. Gas Turbines Power
,
123
(
1
), pp.
100
108
.
7.
Lim
,
S. H.
,
Bladh
,
R.
,
Castanier
,
M. P.
, and
Pierre
,
C.
,
2007
, “
Compact, Generalized Component Mode Mistuning Representation for, Modeling Bladed Disk Vibration
,”
AIAA J.
,
45
(
9
), pp.
2285
2298
.
8.
Yang
,
M. T.
, and
Griffin
,
J. H.
,
1997
, “
A Reduced Order Approach for the Vibration of Mistuned Bladed Disk Assemblies
,”
ASME J. Eng. Gas Turbines Power
,
119
(
1
), pp.
161
167
.
9.
Yang
,
M. T.
, and
Griffin
,
J. H.
,
2001
, “
A Reduced-Order Model of Mistuning Using a Subset of Nominal System Modes
,”
ASME J. Eng. Gas Turbines Power
,
123
(
4
), pp.
893
900
.
10.
Yang
,
B. D.
, and
Menq
,
C. H.
,
1998
, “
Characterization of 3D Contact Kinematics and Prediction of Resonant Response of Structures Having 3D Frictional Constraint
,”
J. Sound Vib.
,
217
(
5
), pp.
909
925
.
11.
Yang
,
B. D.
, and
Menq
,
C. H.
,
1998
, “
Characterization of Contact Kinematics and Application to the Design of Wedge Dampers in Turbomachinery Blading: Part 1—Stick-Slip Contact Kinematics
,”
ASME J. Eng. Gas Turbines Power
,
120
(
2
), pp.
410
417
.
12.
Yang
,
B. D.
, and
Menq
,
C. H.
,
1998
, “
Characterization of Contact Kinematics and Application to the Design of Wedge Dampers in Turbomachinery Blading: Part 2—Prediction of Forced Response and Experimental Verification
,”
ASME J. Eng. Gas Turbines Power
,
120
(
2
), pp.
418
423
.
13.
Cardona
,
A.
,
Coune
,
T.
,
Lerusse
,
A.
, and
Geradin
,
M.
,
1994
, “
A Multiharmonic Method for Nonlinear Vibration Analysis
,”
Int. J. Numer. Methods Eng.
,
37
(
9
), pp.
1593
1608
.
14.
Firrone
,
C. M.
, and
Zucca
,
S.
,
2011
,
Modelling Friction Contacts in Structural Dynamics and Its Application to Turbine Bladed Disks, Numerical Analysis—Theory and Application
, Prof. Jan Awrejcewicz (ed.),
InTech
,
Rijeka, Croatia
, Ch. 14, pp.
301
334
.
15.
Siewert
,
C.
,
Panning
,
L.
,
Wallaschek
,
J.
, and
Richter
,
C.
,
2010
, “
Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces
,”
ASME J. Eng. Gas Turbines Power
,
132
(
8
), p.
082501
.
16.
Craig
,
R. R.
, and
Bampton
,
M. C. C.
,
1968
, “
Coupling of Substructures for Dynamic Analyses
,”
AIAA J.
,
6
(
7
), pp.
1313
1319
.
17.
Hurty
,
W. C.
,
1965
, “
Dynamic Analysis of Structural Systems Using Component Modes
,”
AIAA J.
,
3
(
4
), pp.
678
685
.
18.
Marinescu
,
O.
,
Epureanu
,
B. I.
, and
Banu
,
M.
,
2011
, “
Reduced Order Models of Mistuned Cracked Bladed Disks
,”
ASME J. Vib. Acoust.
,
133
(
5
), pp.
459
471
.
19.
Nacivet
,
S.
,
Pierre
,
C.
,
Thouverez
,
F.
, and
Jezequel
,
L.
,
2003
, “
A Dynamic Lagrangian Frequency-Time Method for the Vibration of Dry-Friction-Damped Systems
,”
J. Sound Vib.
,
265
(
1
), pp.
201
219
.
20.
Cameron
,
T. M.
, and
Griffin
,
J. H.
,
1989
, “
An Alternating Frequency/Time Domain Method for Calculating the Steady-State Response of Nonlinear Dynamic Systems
,”
ASME J. Appl. Mech.
,
56
(
1
), pp.
149
154
.
21.
Poudou
,
O.
, and
Pierre
,
C.
,
2003
, “
Hybrid Frequency-Time Domain Methods for the Analysis of Complex Structural Systems With Dry Friction Damping
,”
44th Structures, Structural Dynamics and Materials Conference
, Vol.
1
, pp.
111
124
.
22.
Borrajo
,
J. M.
,
Zucca
,
S.
, and
Gola
,
M. M.
,
2006
, “
Analytical Formulation of the Jacobian Matrix for Non-Linear Calculation of the Forced Response of Turbine Blade Assemblies With Wedge Friction Dampers
,”
Int. J. Nonlinear Mech.
,
41
(
10
), pp.
1118
1127
.
23.
Yang
,
B. D.
,
Chu
,
M. L.
, and
Menq
,
C. H.
,
1998
, “
Stick-Slip-Separation Analysis and Non-Linear Stiffness and Damping Characterization of Friction Contacts Having Variable Normal Load
,”
J. Sound Vib.
,
210
(
4
), pp.
461
481
.
24.
Petrov
,
E. P.
, and
Ewins
,
D. J.
,
2003
, “
Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks
,”
ASME J. Turbomach.
,
125
(
2
), pp.
364
371
.
25.
Menq
,
C. H.
,
Chidamparam
,
P.
, and
Griffin
,
J. H.
,
1991
, “
Friction Damping of 2-Dimensional Motion and Its Application in Vibration Control
,”
J. Sound Vib.
,
144
(
3
), pp.
427
447
.
26.
Menq
,
C. H.
, and
Yang
,
B. D.
,
1998
, “
Non-Linear Spring Resistance and Friction Damping of Frictional Constraint Having Two-Dimensional Motion
,”
J. Sound Vib.
,
217
(
1
), pp.
127
143
.
27.
Sanliturk
,
K. Y.
, and
Ewins
,
D. J.
,
1996
, “
Modelling Two-Dimensional Friction Contact and Its Application Using Harmonic Balance Method
,”
J. Sound and Vibration
,
193
(
2
), pp.
511
523
.
28.
Fitzner
,
C.
,
Epureanu
,
B. I.
, and
Filippi
,
S.
,
2014
, “
Nodal Energy Weighted Transformation: A Mistuning Projection and Its Application to Flade (tm) Turbines
,”
Mech. Syst. Signal Process.
,
42
(
1–2
), pp.
167
180
.
29.
Hong
,
S. K.
,
Epureanu
,
B. I.
, and
Castanier
,
M. P.
,
2013
, “
Next-Generation Parametric Reduced-Order Models
,”
Mech. Syst. Signal Process.
,
37
(
1–2
), pp.
403
421
.
30.
Madden
,
A.
,
Epureanu
,
B. I.
, and
Filippi
,
S.
,
2012
, “
Reduced-Order Modeling Approach for Blisks With Large Mass, Stiffness, and Geometric Mistuning
,”
AIAA J.
,
50
(
2
), pp.
366
374
.
31.
Petrov
,
E. P.
, and
Ewins
,
D. J.
, “
Advanced Modeling of Underplatform Friction Dampers for Analysis of Bladed Disk Vibration
,”
ASME J. Turbomach.
,
129
(
1
), pp.
143
150
.
32.
Petrov
,
E. P.
,
2004
, “
A Method for Use of Cyclic Symmetry Properties on Analysis of Nonlinear Multiharmonic Vibrations of Bladed Disks
,”
ASME J. Turbomach.
,
126
(
1
), pp.
175
183
.
33.
Kerschen
,
G.
,
Golinval
,
J. C.
,
Vakakis
,
A. F.
, and
Bergman
,
L. A.
,
2005
, “
The Method of Proper Orthogonal Decomposition for Dynamical Characterization and Order Reduction of Mechanical Systems: An Overview
,”
Nonlinear Dyn.
,
41
(
1–3
), pp.
147
169
.
You do not currently have access to this content.