Abstract

This report summarizes the results of several interlaboratory “round robin” test programs for measuring the Mode I interlaminar fracture toughness of advanced fiber-reinforced composite materials. Double cantilever beam (DCB) tests were conducted by participants in ASTM Committee D-30 on High Modulus Fibers and Their Composites and by representatives of the European Group on Fracture (EGF) and the Japanese Industrial Standards Group (JIS). DCB tests were performed on three AS4 carbon fiber-reinforced composite materials: AS4/3501-6 with a brittle epoxy matrix, AS4/BP907 with a tough epoxy matrix, and AS4/PEEK with a tough thermoplastic matrix. Difficulties encountered in manufacturing panels, as well as conducting the tests, are discussed. Critical issues that developed during the course of the testing are highlighted. Results of the round robin testing used to determine the precision of the ASTM DCB test standard are summarized.

Issue Section:
Research Papers
Keywords:
composite materials, double cantilever beam (DCB), interlaminar fracture toughness, delamination, standard test method

References

1.
O'Brien
,
T. K.
 and
Martin
,
R. H.
, “
Results of ASTM Round Robin Testing for Mode I Interlaminar Fracture Toughness of Composite Materials
,” NASA TM 104222,
08
1992
.
2.
Wilkins
,
D. J.
,
Eisenmann
,
J. R.
,
Camin
,
R. A.
, et al, “
Characterizing Delamination Growth in Graphite Epoxy
,”
Damage in Composite Materials: Basic Mechanisms, Accumulation, Tolerance, and Characterization
, ASTM STP 775,
K. L.
 
Reifsnider
, Ed.,
American Society for Testing and Materials
,
Philadelphia
,
1982
, pp.
168
-
183
.
3.
Bascom
,
W. D.
,
Bitner
,
R. J.
,
Moulton
,
R. J.
, and
Siebert
,
A. R.
, “
The Interlaminar Fracture of Organic-Matrix Woven Reinforced Composites
,”
Composites
 0010-4361, Vol.
11
, No.
9
,
01
1980
, pp.
9
-
18
.
4.
de Charentenay
,
F. X.
,
Harry
,
J. M.
,
Prel
,
Y. J.
, and
Benzeggagh
,
M. L.
, “
Characterizing the Effect of Delamination Defect by Mode I Delamination Test
,”
The Effect of Defects in Composite Materials
, ASTM STP 836,
D. J.
 
Wilkins
, Ed.,
American Society for Testing and Materials
,
Philadelphia
,
1984
, pp.
84
-
103
.
5.
Russell
,
A. J.
, “
Factors Affecting the Opening Mode Delamination of Graphite Epoxy Laminates
,”
DREP Materials Report
82-Q,
Defense Research Establishment Pacific
, Victoria, B. C., Canada,
1982
.
6.
Johnson
,
W. S.
 and
Mangalgari
,
P. D.
, “
Investigation of Fiber Bridging in Double Cantilever Beam Specimens
,”
Journal of Composites Technology and Research
 0884-6804, Vol.
9
, Spring
1987
, pp.
10
-
13
.
7.
Martin
,
R. H.
, “
Effect of Initial Delamination on GIc and GIth Values from Glass Epoxy Double Cantilever Beam Tests
,”
Proceedings, 3rd American Society for Composites (ASC) Conference
,
Seattle, WA
,
Technomic Publishers
,
09
1988
, pp.
688
-
700
.
8.
Berry
,
J. P.
, “
Determination of Fracture Energies by the Cleavage Technique
,”
Journal of Applied Physics
 0021-8979 https://doi.org/10.1063/1.1729091, Vol.
34
, No.
1
,
01
1963
, pp.
62
-
68
.
Google Scholar
Crossref
Search ADS
 
9.
Hashemi
,
S.
,
Kinloch
,
A. J.
, and
Williams
,
J. G.
, “
The Analysis of Interlaminar Fracture in Uniaxial Fibre-polymer Composites
,”
Proceedings of the Royal Society of London
, Vol.
A427
, No.
1827
,
1990
, pp.
173
-
199
.
10.
Kageyama
,
K.
 and
Hojo
,
M.
, “
Proposed Methods for Interlaminar Fracture Toughness Tests of Composite Laminates
,”
Proceedings of the 5th U.S./Japan Conference on Composite Materials
,
Tokyo
,
06
1990
, pp.
227
-
234
.
11.
de Kalbermatten
,
T.
,
Jaggi
,
R.
, and
Flueler
,
P.
, “
Interlaminares Bruchverhalten von CFK-Epoxy/PEEK-Laminaten in Mode I an DCB-Proben (Interlaminar Fracture of CFK-Epoxy/PEEK Laminates in Mode I and DCB-Test)
,” EMPA Report No. 116'598/ZEP,
Swiss Federal Laboratories for Materials Testing and Research
, Dubendorf, Switzerland,
09
1990
.
12.
Brunner
,
A. J.
, “
Real Time X-Ray Radiography and Simultaneous Acoustic Emission Monitoring During Mode I Crack Propagation in Double Cantilever Beam (DCB) Specimens from Carbon-Fiber Reinforced PEEK
, EMPA Report No. 116'598/9 ZfP,
Swiss Federal Laboratories for Material Testing and Research
, Dubendorf, Switzerland,
12
1992
.
13.
Flueler
,
P.
, “
Crack Propagation in Fiber Reinforced Composite Materials Analysed with Insitu Microfocal X-ray Radiography and Simultaneous Acoustic Emission Monitoring
,”
Proceedings of the ECCM Conference on Composites Testing and Standardization
,
Amsterdam
,
1992
.
14.
de Kalbermatten
,
T.
,
Jaggi
,
R.
,
Flueler
,
P.
, and
Kausch
,
H. H.
,
Journal of Materials Science Letters
 0261-8028, Vol.
11
,
1992
, pp.
543
-
546
.
Crossref
Search ADS
 
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.