Abstract

While originally used for ceramics, the ball-on-three-ball (B3B) test has shown value for use with cementitious materials. The B3B test uses disk-shaped samples that can be sectioned from a cylinder, which allows a large number of samples to be tested to provide information on statistical repeatability. Additionally, this test is also well suited for use in some cement paste degradation studies. In this research, cement paste and mortar samples made with standard ASTM sand or natural sand were tested using the B3B test. The results showed that the B3B test has less than 10 % variation in flexural strength for cement paste and mortar. Data analysis using statistical Weibull theory indicated that the B3B flexural strength is typically lower than four-point bending flexural strength; however, this can be explained by size effect considerations. Recommended testing procedures were given.

Issue Section:
Technical Papers
Keywords:
cement, flexural test, ball-on-three-ball test, Weibull theory, size effect

References

1.
Weiss
 
W. J.
, “
Chapter 19: Elastic Properties, Creep, and Relaxation
,” in
Significance of Tests and Properties of Concrete and Concrete-Making Materials
, ed.
Lamond
 
J.
 and
Peilert
 
J.
 (
West Conshohocken, PA
:
ASTM International
,
2006
),
194
–
206
. https://doi.org/10.1520/STP37737S
Google Scholar
Crossref
Search ADS
 
2.
Shah
 
S. P.
,
Swartz
 
S. E.
, and
Ouyang
 
C.
,
Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and Other Quasi-Brittle Materials
(
Hoboken, NJ
:
Wiley
,
1995
).
3.
Börger
 
A.
,
Supancic
 
P.
, and
Danzer
 
R.
, “
The Ball on Three Balls Test for Strength Testing of Brittle Discs - Stress Distribution in the Disc
,”
Journal of the European Ceramic Society
 
22
, nos. 
9–10
(
2002
):
1425
–
1436
. https://doi.org/10.1016/S0955-2219(01)00458-7
4.
Börger
 
A.
,
Supancic
 
P.
, and
Danzer
 
R.
, “
The Ball on Three Balls Test for Strength Testing of Brittle Discs: Part II: Analysis of Possible Errors in the Strength Determination
,”
Journal of the European Ceramic Society
 
24
, nos. 
10–11
(September
2004
):
2917
–
2928
. https://doi.org/10.1016/j.jeurceramsoc.2003.10.035
5.
Montgomery
 
J. K.
 and
Faber
 
K. T.
, “
Processing and Surface Flaw Tolerance of Alumina Bilayers
,”
Journal of the American Ceramic Society
 
88
, no. 
2
(February
2005
):
287
–
292
. https://doi.org/10.1111/j.1551-2916.2005.00073.x
Google Scholar
Crossref
Search ADS
 
6.
Danzer
 
R.
,
Harrer
 
W.
,
Supancic
 
P.
,
Lube
 
T.
,
Wang
 
Z.
, and
Börger
 
A.
, “
The Ball on Three Balls Test—Strength and Failure Analysis of Different Materials
,”
Journal of the European Ceramic Society
 
27
, nos. 
2–3
(
2007
):
1481
–
1485
. https://doi.org/10.1016/j.jeurceramsoc.2006.05.034
7.
Harrer
 
W.
,
Danzer
 
R.
,
Supancic
 
P.
, and
Lube
 
T.
, “
Influence of the Sample Size on the Results of B3B-Tests
,”
Key Engineering Materials
 
409
(March
2009
):
176
–
184
. https://doi.org/10.4028/www.scientific.net/KEM.409.176
Google Scholar
Crossref
Search ADS
 
8.
Harrer
 
W.
,
Danzer
 
R.
,
Spancic
 
P.
, and
Lube
 
T.
, “
The Ball on Three Balls Test: Strength Testing of Specimens of Different Sizes and Geometries
” (paper presentation, 10th International Conference of the European Ceramic Society, Baden-Baden, Germany, January
2008
).
9.
Nohut
 
S.
, “
A General Formulation for Strength Prediction of Advanced Ceramics by Ball-on-Three-Balls (B3B)-Test with Different Multiaxial Failure Criteria
,”
Ceramics International
 
38
, no. 
3
(
2012
):
2411
–
2420
. https://doi.org/10.1016/j.ceramint.2011.11.007
Google Scholar
Crossref
Search ADS
 
10.
Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
(Superseded), ASTM C1550–12a(2012) (
West Conshohocken, PA
:
ASTM International
, approved December 1, 2012). https://doi.org/10.1520/C1550-12A
11.
Cao
 
Y.
,
Weiss
 
W. J.
,
Youngblood
 
J.
,
Moon
 
R.
, and
Zavaterri
 
P.
, “
Performance-Enhanced Cementitious Matrerials by Cellulose Nanocrystal Additions
,” in
Production and Applications of Cellulose Nanomaterials
(
Atlanta, GA
:
TAPPI Press
,
2013
),
135
–
136
.
12.
Cao
 
Y.
, “
Nano-Modification for High Performance Cement Composites with Cellulose NanoCrystals and Carbon Nanotubes
” (PhD diss.,
Purdue University
,
2014
).
13.
Cao
 
Y.
,
Zavaterri
 
P.
,
Youngblood
 
J.
,
Moon
 
R.
, and
Weiss
 
J.
, “
The Influence of Cellulose Nanocrystal Additions on the Performance of Cement Paste
,”
Cement and Concrete Composites
 
56
(
2015
):
73
–
83
. https://doi.org/10.1016/j.cemconcomp.2014.11.008
Google Scholar
Crossref
Search ADS
 
14.
Cao
 
Y.
,
Zavattieri
 
P.
,
Youngblood
 
J.
,
Moon
 
R.
, and
Weiss
 
J.
, “
The Relationship between Cellulose Nanocrystal Dispersion and Strength
,”
Construction and Building Materials
 
119
(August
2016
):
71
–
79
. https://doi.org/10.1016/j.conbuildmat.2016.03.077
Google Scholar
Crossref
Search ADS
 
15.
Qiao
 
C.
,
Suraneni
 
P.
, and
Weiss
 
J.
, “
Flexural Strength Reduction of Cement Pastes Exposed to CaCl2 Solutions
,”
Cement and Concrete Composites
 
86
(February
2018
):
297
–
305
. https://doi.org/10.1016/j.cemconcomp.2017.11.021
Google Scholar
Crossref
Search ADS
 
16.
Qiao
 
C.
,
Suraneni
 
P.
, and
Weiss
 
J.
, “
Damage in Cement Pastes Exposed to NaCl Solutions
,”
Construction and Building Materials
 
171
(May
2018
):
120
–
127
. https://doi.org/10.1016/j.conbuildmat.2018.03.123
Google Scholar
Crossref
Search ADS
 
17.
Erbektas
 
A. R.
,
Isgor
 
O. B.
, and
Weiss
 
W. J.
, “
An Accelerated Testing Protocol for Assessing Microbially Induced Concrete Deterioration during the Bacterial Attachment Phase
,”
Cement and Concrete Composites
 
104
(November
2019
):
1
–
13
. https://doi.org/10.1016/j.cemconcomp.2019.103339
Google Scholar
Crossref
Search ADS
 
18.
Erbektas
 
A. R.
,
Isgor
 
O. B.
, and
Weiss
 
W. J.
, “
Evaluating the Efficacy of Antimicrobial Additives Against Biogenic Acidification in Simulated Wastewater Exposure Solutions
,”
RILEM Technical Letters
 
4
(
2019
):
49
–
56
. https://doi.org/10.21809/rilemtechlett.2019.62
Google Scholar
Crossref
Search ADS
 
19.
Standard Specification for Standard Sand
, ASTM C778–17(2017) (
West Conshohocken, PA
:
ASTM International
, approved August 1, 2017). https://doi.org/10.1520/C0778-17
20.
Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
, ASTM C305–14 (2014) (
West Conshohocken, PA
:
ASTM International
, approved August 1, 2014). https://doi.org/10.1520/C0305-14
21.
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
(Superseded), ASTM C78/C78M-16(2016) (
West Conshohocken, PA
:
ASTM International
, approved July 1, 2016). https://doi.org/10.1520/C0078_C0078M-16
22.
Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
, ASTM C469/C469M-14(2014) (
West Conshohocken, PA
:
ASTM International
, approved March 1, 2014). https://doi.org/10.1520/C0469_C0469M-14
23.
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
(Superseded), ASTM E177–14(2014) (
West Conshohocken, PA
:
ASTM International
, approved May 1, 2014). https://doi.org/10.1520/E0177-14
24.
Leys
 
C.
,
Ley
 
C.
,
Klein
 
O.
,
Bernard
 
P.
, and
Licata
 
L.
, “
Detecting Outliers: Do Not Use Standard Deviation around the Mean, Use Absolute Deviation around the Median
,”
Journal of Experimental Social Psychology
 
49
, no. 
4
(July
2013
):
764
–
766
. https://doi.org/10.1016/j.jesp.2013.03.013
Google Scholar
Crossref
Search ADS
 
25.
ACI Committee 446 “
Fracture Mechanics of Concrete: Concepts, Models, and Determination of Material Properties
,” in
Fracture Mechanics of Concrete Structures
, ed.
Bažant
 
Z. P.
 (
London
:
Elsevier Applied Science
,
1992
),
3
–
140
.
26.
Bazžant
 
Z. P.
 and
Planas
 
J.
,
Fracture and Size Effect in Concrete and Other Quasibrittle Materials
, 1st ed. (
Boca Raton, FL
:
CRC Press
,
1998
).
27.
Weibull
 
W.
,
A Statistical Theory of the Strength of Materials
(
Stockholm, Sweden
:
Royal Institute for Engineering Research
,
1939
).
28.
Weibull
 
W.
, “
A Statistical Distribution Function of Wide Applicability
,”
Journal of Applied Mechanics
 
18
(
1951
):
293
–
297
.
Google Scholar
Crossref
Search ADS
 
29.
Munz
 
D.
 and
Fett
 
T.
,
Ceramics: Mechanical Properteis, Failure Behaviour, Materials Selection
(
Berlin, Germany
:
Springer
,
1999
).
Google Scholar
Crossref
Search ADS
 
30.
Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
(Superseded), ASTM C1239–13(2013) (
West Conshohocken, PA
:
ASTM International
, approved August 1, 2013). https://doi.org/10.1520/C1239-13
31.
Thoman
 
D. R.
,
Bain
 
L. J.
, and
Antle
 
C. E.
, “
Inferences on the Parameters of the Weibull Distribution
,”
Technometrics
 
11
, no. 
3
(August
1969
):
445
–
460
. https://doi.org/10.1080/00401706.1969.10490706
Google Scholar
Crossref
Search ADS
 
32.
Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
(Superseded), ASTM C1683–10(2015) (
West Conshohocken, PA
:
ASTM International
, approved January 1, 2015). https://doi.org/10.1520/C1683-10R15
33.
Danzer
 
R.
,
Lube
 
T.
, and
Supancic
 
P.
, “
Monte-Carlo Simulations of Strength Distributions of Brittle Materials - Type of Distribution, Specimen and Sample Size
,”
Zeitschrift fur Metallkunde
 
92
, no. 
7
(July
2001
):
773
–
783
.
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.