Abstract

Extensive research has been conducted to investigate the utility of agricultural products such as coir, jute, bamboo, and sisal as limited life geotextiles (LLG). These agricultural products have extensive use in automotive industry, paper industry, fishing nets, and shipping rigs. As an alternative, this study demonstrates the usefulness of an abundant, harmful (for environment, eco-tourism, and bio-diversity) weed species Eichhornia crassipes(Water hyacinth (WH)) for manufacturing LLG. Biochemical composition (cellulose, hemicellulose, lignin, and ash content) of WH fiber as well as tensile strength of WH filaments and woven geotextiles were determined. It was found that the tensile strength of woven geotextiles made from WH is higher or comparable to those fibers from the agricultural products. The efficacy of WH geotextile for short term strength improvement was demonstrated by comparing the CBR value of geotextile reinforced soil with that of unreinforced soil. CBR values of soil reinforced with WH geotextile were found to be higher (8.48 ± 0.2 %) as compared to unreinforced soil (6.13 ± 0.07 %). The result obtained from this study is encouraging for promoting the utility of WH LLG in road infrastructure projects.

Issue Section:
Technical Notes
Keywords:
Tensile strength, harmful weed, California Bearing Ratio tests, Limited life geotextiles

References

1.
Lekha
,
K.R.
 and
Kavitha
,
V.
, “
Coir Geotextile Reinforced Clay Dykes for Drainage of Low Lying Areas
,”
Geotext. Geomembr.
, Vol.
24
, No.
1
,
2006
, pp.
38
–
51
. https://doi.org/10.1016/j.geotexmem.2005.05.001
Google Scholar
Crossref
Search ADS
 
2.
Subaida
,
E.A.
,
Chandrakaran
,
S.
, and
Sankar
,
N.
, “
Experimental Investigations on Tensile and Pullout Behaviour of Woven Coir Geotextiles
,”
Geotext. Geomembr.
, Vol.
26
, No.
5
,
2008
, pp.
384
–
392
. https://doi.org/10.1016/j.geotexmem.2008.02.005
Google Scholar
Crossref
Search ADS
 
3.
Gadi
,
V.K.
,
Bordoloi
,
S.
,
Garg
,
A.
,
Kobayashi
,
Y.
, and
Sahoo
,
L.
, “
Improving and Correcting Unsaturated Soil Hydraulic Properties With Plant Parameters for Agriculture and Bioengineered Slopes
,”
Rhizosphere
, Vol.
1
,
2016
, pp.
58
–
78
. https://doi.org/10.1016/j.rhisph.2016.07.003
Google Scholar
Crossref
Search ADS
 
4.
Leao
,
A.L.
,
Rowell
,
R.
, and
Tavares
,
N.
, “
Applications of Natural Fibers in Automotive Industry in Brazil-Thermoforming Process
,”
Science and Technology of Polymers and Advanced Materials
,
Springer
,
New York
,
1998
, pp.
755
–
761
.
Google Scholar
Crossref
Search ADS
 
5.
Sarsby
,
R.W.
, “
Use of ‘Limited Life Geotextiles (LLGs) for Basal Reinforcement of Embankments Built on Soft Clay
,”
Geotext. Geomembr.
, Vol.
25
, Nos.
4–5
,
2007
, pp.
302
–
310
. https://doi.org/10.1016/j.geotexmem.2007.02.010
6.
Ververis
,
C.
,
Georghiou
,
K.
,
Christodoulakis
,
N.
,
Santas
,
P.
, and
Santas
,
R.
, “
Fiber Dimensions, Lignin and Cellulose Content of Various Plant Materials and Their Suitability for Paper Production
,”
Ind. Crop. Prod.
, Vol.
19
, No.
3
,
2004
, pp.
245
–
254
. https://doi.org/10.1016/j.indcrop.2003.10.006
Google Scholar
Crossref
Search ADS
 
7.
Anon.
“
The Value of Sisal Hemp for the Manufacture of Marine Cordage, Reports of Recent Investigations at the Imperial Institute
,”
Bull. Imperial Inst.
, Vol.
25
,
1927
, pp.
359
–
368
.
8.
Artidteang
,
S.
,
Bergado
,
D.T.
,
Tanchaisawat
,
T.
, and
Saowapakpiboon
,
J.
, “
Investigation of Tensile and Soil-Geotextile Interface Strength of Kenaf Woven Limited Life Geotextiles (LLGs)
,”
J. Lowland Int. Technol.
, Vol.
14
, No.
2
,
2012
, pp.
1
–
8
.
9.
Maneecharoen
,
J.
,
Htwe
,
W.
,
Bergado
,
D.T.
, and
Baral
,
P.
, “
Ecological Erosion Control by Limited Life Geotextiles (LLGs) as Well as With Vetiver and Ruzi Grasses
,”
Indian Geotech. J.
, Vol.
43
, No.
4
,
2013
, pp.
388
–
406
.
Google Scholar
Crossref
Search ADS
 
10.
Tanchaisawat
,
T.
,
Bergado
,
D.T.
, and
Artidteang
,
S.
, “
Large-Scale Soil Erosion Performance Test of Water Hyacinth Limited Life Geosynthetics Combined With Ruzi Grasses
,”
Int. J. Geotech. Eng.
, Vol.
8
, No.
3
,
2014
, pp.
315
–
327
. https://doi.org/10.1179/1939787914Y.0000000045
Google Scholar
Crossref
Search ADS
 
11.
Bordoloi
,
S.
,
Yamsani
,
S.K.
,
Garg
,
A.
,
Sreedeep
,
S.
, and
Borah
,
S.
, “
Study on the Efficacy of Harmful Weed Species Eicchornia Crassipes for Soil Reinforcement
,”
Ecol. Eng.
, Vol.
31
, No.
85
,
2015
, pp.
218
–
222
. https://doi.org/10.1016/j.ecoleng.2015.09.082
12.
Kurugodu
,
H.V.
,
Bordoloi
,
S.
,
Garg
,
A.
,
Garg
,
A.
, and
Sreedeep
,
S.
, “
Compressive Strength Analysis of Soil Reinforced With Fiber Extracted From Water Hyacinth
,”
Eng. Comput.
,
2016
, (accepted).
13.
Zhang
,
Y.Y.
,
Zhang
,
D.Y.
, and
Barrett
,
S.C.
, “
Genetic Uniformity Characterizes the Invasive Spread of Water Hyacinth (Eichhornia Crassipes), A Clonal Aquatic Plant
,”
Mol. Ecol.
, Vol.
19
, No.
9
,
2010
, pp.
1774
–
1786
. https://doi.org/10.1111/j.1365-294X.2010.04609.x
Google Scholar
Crossref
Search ADS
PubMed
 
14.
Crafter
,
S.A.
,
Njuguna
,
S.G.
, and
Howard
,
G.W.
, “
Wetlands of Kenya
,” presented at the
KWWG Seminar on Wetlands of Kenya
,
National Museums of Kenya
,
Nairobi, Kenya
, July 3–5
1992
,
ICUN
,
Gland, Switzerland
, -unpublished.
15.
Center
,
T.D.
,
Hill
,
M.P.
,
Cordo
,
H.
, and
Julien
,
M.H.
, “
Water Hyacinth. Biological Control of Invasive Plants in the Eastern United States
,” Report No.FHTET-2002-04,
US Forest Service
, Morgantown, WV,
2002
.
16.
Malik
,
A.
, “
Environmental Challenge vis a vis Opportunity: The Case of Water Hyacinth
,”
Environ. Int.
, Vol.
33
, No.
1
,
2007
, pp.
122
–
138
. https://doi.org/10.1016/j.envint.2006.08.004
Google Scholar
Crossref
Search ADS
PubMed
 
17.
Epstein
,
P.
, “
Nairobi Weeds Bring Disease to the East African Waterways
,”
The Lancet
, Vol.
351
, No.
9102
,
1998
, p.577. https://doi.org/10.1016/S0140-6736(05)78570-6
18.
Genet
,
M.
,
Stokes
,
A.
,
Salin
,
F.
,
Mickovski
,
S.B.
,
Fourcaud
,
T.
,
Dumail
,
J.F.
, and
van Beek
,
R.
, “
The Influence of Cellulose Content on Tensile Strength in Tree Roots
,”
Plant Soil.
, Vol.
278
, Nos.
1–2
,
2005
, pp.
1
–
9
. https://doi.org/10.1007/s11104-005-8768-6
19.
Methacanon
,
P.
,
Weerawatsophon
,
U.
,
Sumransin
,
N.
,
Prahsarn
,
C.
, and
Bergado
,
D.T.
, “
Properties and Potential Application of the Selected Natural Fibers as Limited Life Geotextiles
,”
Carbohyd. Polym.
, Vol.
82
, No.
4
,
2010
, pp.
1090
–
1096
. https://doi.org/10.1016/j.carbpol.2010.06.036
Google Scholar
Crossref
Search ADS
 
20.
Patel
,
V.B.
,
Patel
,
A.R.
,
Patel
,
M.C.
, and
Madamwar
,
D.B.
, “
Effect of Metals on Anaerobic Digestion of Water Hyacinth-Cattle Dung
,”
Appl. Biochem. Biotech.
, Vol.
43
, No.
1
,
1993
, pp.
45
–
50
. https://doi.org/10.1007/BF02916429
Google Scholar
Crossref
Search ADS
 
21.
Holtz
,
R.D.
 and
Sivakugan
,
N.
, “
Design Charts for Roads With Geotextiles
,”
Geotext. Geomembr.
, Vol.
5
, No.
3
,
1987
, pp.
191
–
199
. https://doi.org/10.1016/0266-1144(87)90016-1
Google Scholar
Crossref
Search ADS
 
22.
Bergado
,
D.T.
,
Youwai
,
S.
,
Hai
,
C.N.
, and
Voottipruex
,
P.
, “
Interaction of Nonwoven Needle-Punched Geotextiles Under Axisymmetric Loading Conditions
,”
Geotext. Geomembr.
, Vol.
19
, No.
5
,
2001
, pp.
299
–
328
. https://doi.org/10.1016/S0266-1144(01)00010-3
Google Scholar
Crossref
Search ADS
 
23.
Yetimoglu
,
T.
,
Inanir
,
M.
, and
Inanir
,
O.E.
, “
A Study on Bearing Capacity of Randomly Distributed Fiber-Reinforced Sand Fills Overlying Soft Clay
,”
Geotext. Geomembr.
, Vol.
23
, No.
2
,
2005
, pp.
174
–
183
. https://doi.org/10.1016/j.geotexmem.2004.09.004
Google Scholar
Crossref
Search ADS
 
24.
IRC 37,
I. R.C. Guidelines for the Design of Flexible Pavements (Third Revision)
,
Indian Bureau of Standards
,
New Delhi, India
,
2012
.
25.
ASTM D2487-11,
Standard Practice for Classification of Soils for Engineering Purpose (Unified Soil Classification System)
,
ASTM International
,
West Conshohocken, PA
,
2011
, www.astm.org
26.
Jenkins
,
S.H.
, “
The Determination of Cellulose in Straws
,”
Biochem. J.
, Vol.
24
, No.
5
,
1930
, pp.
1428
–
1432
. https://doi.org/10.1042/bj0241428
Google Scholar
Crossref
Search ADS
PubMed
 
27.
Goering
,
H.K.
 and
Van Soest
,
P.J.
, “
Forage Fiber Analyses (Apparatus, Reagents, Prcedures, and Some Applications)
,
US Agricultural Research Service
,
Washington, D.C.
,
1970
.
28.
TAPPI T222 om-88,
Acid-Insoluble Lignin in Wood and Pulp
,
Klason Lignin, TAPPI
,
Peachtree Corners, GA
,
1996
.
29.
ASTM E1755-01(2015),
Standard Method for the Determination of Ash in Biomass
,
ASTM International
,
West Conshohocken, PA
,
2015
, www.astm.org
30.
Jústiz-Smith
,
N.G.
,
Virgo
,
G.J.
, and
Buchanan
,
V.E.
, “
Potential of Jamaican Banana, Coconut Coir and Bagasse Fibres as Composite Materials
,”
Mater. Charact.
, Vol.
59
, No.
9
,
2008
, pp.
1273
–
1278
. https://doi.org/10.1016/j.matchar.2007.10.011
Google Scholar
Crossref
Search ADS
 
31.
Bledzki
,
A.K.
 and
Gassan
,
J.
, “
Composites Reinforced With Cellulose Based Fibres
,”
Prog. Polym. Sci.
, Vol.
24
, No.
2
,
1999
, pp.
221
–
274
. https://doi.org/10.1016/S0079-6700(98)00018-5
Google Scholar
Crossref
Search ADS
 
32.
IS-2720-Part 3,
Methods of Test for Soils. Determination of Specific Gravity
,
Bureau of Indian Standards Publications
,
New Delhi, India
,
1980
.
33.
IS-1670,
Determination of Breaking Load and Elongation at Break of Single Strand Textiles and Yarns
,
Bureau of Indian Standards Publications
,
New Delhi, India
,
1991
.
34.
ASTM D4595-11,
Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
,
ASTM International
,
West Conshohocken, PA
,
2009
,www.astm.org
35.
IS-9669,
Specifications for CBR Moulds and its Accessories
,
Bureau of Indian Standards Publications
,
New Delhi, India
,
1980
.
36.
IS-2720-Part 16,
Methods of Test for Soils. Laboratory Determination of CBR
,
Bureau of Indian Standards Publications
,
New Delhi, India
,
1987
.
37.
Vadivambal
,
R.
, “
Tensile Strength and Elongation of Hemp and Sisal Ropes at Different Temperatures
,”, https://doi.org/10.7451/CBE.2015.57.3.9
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.