Abstract

This study investigates the effect that specimen depth has on the torsional shear strength of full-size Eastern Species Laminated Veneer Lumber (LVL). Characterization of this effect is valuable for structural design purposes as well as for use in constitutive modeling when predicting member strength of one depth based on member strength of a different depth derived from testing. To this end, torsion tests were carried out on three depths (140, 184, and 235 mm) of 1.98 m long by 44 mm thick 1.9E Eastern Species LVL. The shear strength of each depth was determined based on homogeneous, orthotropic theory for beams of rectangular cross-section. Despite a perceptible trend of slightly decreasing shear strength with increasing depth, an analysis of variance test indicated that no statistically significant depth effect exists as it relates to torsional shear strength. Further, a three dimensional finite element model of the 44 mm by 140 mm specimen indicated that stresses are uniform within the shear span of 2 times the depth plus the grip distance away from each end of the specimen. The predicted average maximum shear stress in this region compared well to the maximum shear stresses obtained experimentally.

Issue Section:
Research Papers
Keywords:
torsion, shear strength, laminated veneer lumber, size effect, wood composite

References

1.
Madsen
,
B.
, “
Size Effects in Defect Free Douglas-fir
.”
Can. J. Civ. Eng.
, Vol.
17
,
1990
, pp.
238
–
242
. https://doi.org/10.1139/l90-029
Google Scholar
Crossref
Search ADS
 
2.
Sharp
,
D. J.
 and
Suddarth
,
S. K.
, “
Volumetric Effects in Structural Composite Lumber
,”
Proceedings of the International Timber Engineering Conference
, Vol.
3
, London, UK, Sept 2–5,
1991
, pp.
427
–
433
.
3.
Zweben
,
C.
, “
Size Effect in Composite Materials and Structures: Basic Concepts and Design Considerations
,”
NASA Conference Publication No. 3271, NASA
, Washington, DC,
1994
, pp.
197
–
217
.
4.
Bažant
,
Z. P.
 and
Zdeněk
,
P. B.
, “
Fracture and Size Effect
,”
Concrete and Other Quasibrittle Materials
, Vol.
16
,
CRC Press
,
Boca Raton, FL
,
1998
.
5.
Arwade
,
S.
,
Clouston
,
P.
 and
Krupka
,
M.
, “
Length Effects in the Orthogonal Directions of Structural Composite Lumber
,”
ASTM J. Test. Eval.
, Vol.
39
, No.
4
,
2011
, JTE103261. https://doi.org/10.1520/JTE103261
6.
Clouston
,
P.
,
Lam
,
F.
 and
Barrett
,
J. D.
, “
Incorporating Size Effects in the Tsai- Wu Strength Theory for Douglas-fir Laminated Veneer
,”
Wood Sci. Technol.
, Vol.
32
,
1998
, pp.
215
–
226
.
Google Scholar
Crossref
Search ADS
 
7.
Clouston
,
P.
 and
Lam
,
F.
, “
Computational Modeling of Strand-based Wood Composites
,”
ASCE J. Eng. Mech.
, Vol.
127
, No.
8
,
2001
, pp.
844
–
851
. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:8(844)
Google Scholar
Crossref
Search ADS
 
8.
Clouston
,
P.
 and
Lam
,
F.
, “
A Stochastic Plasticity Approach to Strength Modeling of Strand-based Wood Composites
,”
Compos. Sci. Technol.
, Vol.
62
,
2002
, pp.
1381
–
1395
. https://doi.org/10.1016/S0266-3538(02)00086-6
Google Scholar
Crossref
Search ADS
 
9.
ASTM D143
:
Standard Test Methods for Small Clear Specimens of Timber
,
Annual Book of ASTM Standards
,
ASTM International
,
West Conshohocken, PA
,
2009
.
10.
Riyanto
,
D. S.
 and
Gupta
,
R.
, “
A Comparison of Test Methods for Evaluating Shear Strength of Structural Lumber
,”
Forest Prod. J.
, Vol.
48
, No.
2
,
1998
, pp.
83
–
90
.
11.
Gupta
,
R.
,
Heck
,
L. R.
 and
Miller
,
T. H.
, “
Experimental Evaluation of the Torsion Test for Determining Shear Strength of Structural Lumber
,”
ASTM J. Test. Eval.
, Vol.
30
, No.
4
,
2002
, pp.
283
–
290
. https://doi.org/10.1520/JTE12318J
Google Scholar
Crossref
Search ADS
 
12.
Gupta
,
R.
 and
Siller
,
T. S.
, “
Shear Strength of Structural Composite Lumber Using Torsion Tests
,”
ASTM J. Test. Eval.
, Vol.
33
, No.
2
,
2005
, pp.
110
–
117
.
Google Scholar
Crossref
Search ADS
 
13.
Gupta
,
R.
 and
Siller
,
T. S.
, “
A Comparison of the Shear Strength of Structural Composite Lumber Using Torsion and Shear Block Tests
,”
Forest Prod. J.
, Vol.
55
, No.
12
,
2005
, pp.
29
–
34
.
14.
Khokhar
,
A.
,
Zhang
,
H.
 and
Ridley-Ellis
,
D.
, “
The Shear Strength, and Failure Modes, of Timber Joists Obtained From the Torsion Test Method
,”
Proceedings of the 11th World Conference of Timber Engineering
, Riva del Garda, Italy, June 20–24,
2010
.
15.
Lam
,
F.
 and
Craig
,
B. A.
, “
Shear Strength in Structural Composite Lumber
,”
J. Mater. Civ. Eng.
, Vol.
12
, No.
3
,
2000
, pp.
196
–
204
. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:3(196)
Google Scholar
Crossref
Search ADS
 
16.
Yang
,
Z.
,
2012
, “
Torsional Shear Strength and Size Effect in Structural Composite Lumber
,” MS.c. thesis,
University of Massachusetts
, Amherst, MA.
17.
Yang
,
Z.
,
Clouston
,
P.
 and
Schreyer
,
A.
, “
Torsional Shear Tests on Laminated Veneer Lumber Using a Universal-type Test Machine
,”
ASCE J. Mater. Civ. Eng.
, Vol.
25
, No.
12
,
2013
, pp.
1979
–
1983
. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000752
Google Scholar
Crossref
Search ADS
 
18.
ASTM D2395
:
Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
,
Annual Book of ASTM Standards
,
ASTM International
,
West Conshohocken, PA
,
2002
.
19.
ASTM D198
:
Standard Methods of Static Tests of Timbers in Structural Sizes
,
Annual Book of ASTM Standards
,
ASTM International
,
West Conshohocken, PA
,
2009
.
20.
Trayer
,
G.
 and
March
,
H.
, “
The Torsion of Members Having Sections Common in Aircraft Construction
,” Report No. 334,
National Advisory Committee for Aeronautics
, Washington, DC,
1929
.
21.
Lekhnitskii
,
S. G.
,
Theory of Elasticity of an Anisotropic Body
,
MIR Publishers
,
Moscow
,
1981
, pp.
283
–
287
.
22.
Janowiak
,
J. J.
,
Hindman
,
D. P.
 and
Manbeck
,
H. B.
, “
Orthotropic Behavior of Lumber Composite Materials
,”
Wood Fiber Sci.
, Vol.
33
, No.
4
,
2001
, pp.
580
–
594
.
23.
USDA, Forest Service
, “
Wood as an Engineering Material
,”
General Technical Report FPL-GTR-190
,
U. S. Department of Agriculture, Forest Service, Forest Products Madison
,
WI
,
2010
.
24.
Gupta
,
R.
,
Heck
,
L. R.
 and
Miller
,
T. H.
, “
Finite-Element Analysis of the Stress Distribution in a Torsion Test of Full-size, Structural Lumber
,”
ASTM J. Test. Eval.
, Vol.
30
, No.
4
,
2002
, pp.
291
–
302
. https://doi.org/10.1520/JTE12319J
Google Scholar
Crossref
Search ADS
 
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.