https://orcid.org/0000-0002-9464-1751
Abstract
Pervious concrete creates a very porous medium that allows water to penetrate the pavement to underlying soils. It is a promising candidate in permeable pavement systems in urban areas, which could be an efficient solution to sustainable drainage systems. Concrete mixture design usually requires labor-intensive and time-consuming work, which involves a significant amount of “trial batching” approaches. Recently, machine learning methods have demonstrated that a robust model might help reduce the experimental work. Thus, we develop the Gaussian process regression (GPR) model to shed light on the relationship between predictors (nominal coarse aggregate sizes, cement content, water-to-cement ratios, and coarse aggregates content) and each of the different properties (density, compressive strength, tensile strength, and porosity) of pervious concrete. The modeling approach has a high degree of accuracy and stability, contributing to fast, low-cost estimations of multiple properties of pervious concrete.
Issue Section:
Technical Papers
References
1.
Report on Pervious Concrete
, ACI 522R-10 (Farmington Hills, MI
: American Concrete Institute
, 2010
).2.
Imran
H. M.
, Akib
S.
, and Karim
M. R.
, “Permeable Pavement and Stormwater Management Systems: A Review
,” Environmental Technology
34
, no. 18
(April 2013
): 2649
–2656
, https://doi.org/10.1080/09593330.2013.7825733.
Crouch
L. K.
, Pitt
J.
, and Hewitt
R.
, “Aggregate Effects on Pervious Portland Cement Concrete Static Modulus of Elasticity
,” Journal of Materials in Civil Engineering
19
, no. 7
(July 2007
): 561
–568
, https://doi.org/10.1061/(ASCE)0899-1561(2007)19:7(561)4.
Kia
A.
, Wong
H. S.
, and Cheeseman
C. R.
, “Clogging in Permeable Concrete: A Review
,” Journal of Environmental Management
193
(May 2017
): 221
–233
, https://doi.org/10.1016/j.jenvman.2017.02.0185.
Stenmark
C.
, “An Alternative Road Construction for Stormwater Management in Cold Climates
,” Water Science and Technology
32
, no. 1
(1995
): 79
–84
, https://doi.org/10.2166/wst.1995.00196.
DeRousseau
M. A.
, Kasprzyk
J. R.
, and Srubar
W. V.
III, “Computational Design Optimization of Concrete Mixtures: A Review
,” Cement and Concrete Research
109
(July 2018
): 42
–53
, https://doi.org/10.1016/j.cemconres.2018.04.0077.
Kosmatka
S. H.
and Wilson
M. L.
, Design and Control of Concrete Mixtures
, 15th ed. (Skokie, IL
: Portland Cement Association
, 2011
).8.
Mindess
S.
, Young
F. J.
, and Darwin
D.
, Concrete
, 2nd ed. (Upper Saddle River, NJ
: Prentice Hall
, 2003
).9.
Haselbach
L.
and Gaither
A.
, “Preliminary Field Testing: Urban Heat Island Impacts and Pervious Concrete
” (paper presentation, Concrete Technology Forum, Focus on Sustainable Development, National Ready Mixed Concrete Association
, Denver, CO
, May 20
–22
, 2008
).10.
Fu
T. C.
, Yeih
W.
, Chang
J. J.
, and Huang
R.
, “The Influence of Aggregate Size and Binder Material on the Properties of Pervious Concrete
,” Advances in Materials Science and Engineering
2014
(October 2014
): 963971.11.
Zhou
X.-X.
, Xue
F.
, Gou
X.
, and Shen
T.-M.
, “Statistical Study of the Void Structure of Bi2212 Multifilamentary Superconducting Wires and Its Effect on the Critical Current Density
,” Engineering Computations
36
, no. 8
(October 2019
): 2714
–2725
, https://doi.org/10.1108/EC-10-2018-047612.
Torres
A.
, Gaedicke
C.
, Hu
J.
, Bejugam
R.
, and McMasters
S.
, “Comparing Design Void Content with Actual Void Content of Laboratory Prepared Pervious Concrete
,” Materials Sciences and Applications
9
, no. 7
(June 2018
): 596
–613
.13.
Akand
L.
, Yang
M.
, and Gao
Z.
, “Characterization of Pervious Concrete through Image Based Micromechanical Modeling
,” Construction and Building Materials
114
(July 2016
): 547
–555
, https://doi.org/10.1016/j.conbuildmat.2016.04.00514.
National Ready Mixed Concrete Association, Pervious Concrete: Experimental Validation of Mixture Proportioning Methodology, Report Number 2PE001
(Alexandria, VA
: National Ready Mixed Concrete Association
, 2009
).15.
Deo
O.
and Neithalath
N.
, “Compressive Response of Pervious Concretes Proportioned for Desired Porosities
,” Construction and Building Materials
25
, no. 11
(November 2011
): 4181
–4189
, https://doi.org/10.1016/j.conbuildmat.2011.04.05516.
Xie
L.
, Jiang
Y.
, Bao
N.
, Han
K.
, and Zhou
J.
, “An Experiment Investigation on Electrification by Collision between Chemically Identical Glass Particles
,” AIP Conference Proceedings
1542
, no. 1
(June 2013
): 859
–862
.17.
Zhou
J.
and Xie
L.
, “Effect of Net Surface Charge on Particle Sizing and Material Recognition by Using Phase Doppler Anemometry
,” Applied Optics
50
, no. 3
(2011
): 379
–386
, https://doi.org/10.1364/AO.50.00037918.
Miyakawa
M.
, Kim
S. W.
, Hirano
M.
, Kohama
Y.
, Kawaji
H.
, Atake
T.
, Ikegami
H.
, Kono
K.
, and Hosono
K.
, “Superconductivity in an Inorganic Electride 12CaO·7Al2O3:e-
,” Journal of the American Chemical Society
129
, no. 23
(May 2007
): 7270
–7271
, https://doi.org/10.1021/ja072464419.
Schwartz
J.
, Koch
C. C.
, Zhang
Y.
, and Liu
X.
. Formation of bismuth strontium calcium copper oxide superconductors. U.S. Patent US9773962B2, filed October 8, 2013, and issued September 26, 2017
.20.
Zhang
Y.
, Johnson
S.
, Naderi
G.
, Chaubal
M.
, Hunt
A.
, and Schwartz
J.
, “High Critical Current Density Bi2Sr2CaCu2Ox/Ag Wire Containing Oxide Precursor Synthesized from Nano-Oxides
,” Superconductor Science and Technology
29
, no. 9
(2016
): 095012, https://doi.org/10.1088/0953-2048/29/9/09501221.
Zhang
Y.
, Koch
C. C.
, and Schwartz
J.
, “Formation of Bi2Sr2CaCu2Ox/Ag Multifilamentary Metallic Precursor Powder-in-Tube Wires
,” Superconductor Science and Technology
29
, no. 12
(October 2016
): 125005, https://doi.org/10.1088/0953-2048/29/12/12500522.
Zhang
Y.
, Koch
C. C.
, and Schwartz
J.
, “Synthesis of Bi2Sr2CaCu2Ox Superconductors via Direct Oxidation of Metallic Precursors
,” Superconductor Science and Technology
27
, no. 5
(May 2014
): 055016, https://doi.org/10.1088/0953-2048/27/5/05501623.
Yang
Z.
, Liu
Z.
, Sheng
J.
, Guo
W.
, Zeng
Y.
, Gao
P.
, and Ye
J.
, “Opto-Electric Investigation for Si/Organic Heterojunction Single-Nanowire Solar Cells
,” Scientific Reports
7
, no. 1
(November 2017
): 14575, https://doi.org/10.1038/s41598-017-15300-024.
Lin
L.
, Gu
C.
, Zhu
J.
, Ye
Q.
, Jiang
E.
, Wang
W.
, Liao
M.
, et al., “Engineering of Hole-Selective Contact for High-Performance Perovskite Solar Cell Featuring Silver Back-Electrode
,” Journal of Materials Science
54
, no. 10
(May 2019
): 7789
–7797
, https://doi.org/10.1007/s10853-018-03258-x25.
Hosseini
T.
, Flores-Vivian
I.
, Sobolev
K.
, and Kouklin
N.
, “Concrete Embedded Dye-Synthesized Photovoltaic Solar Cell
,” Scientific Reports
3
(September 2013
): 2727, https://doi.org/10.1038/srep0272726.
Wang
Y.
, Li
M.
, Hasanyan
D.
, Gao
J.
, Li
J.
, and Viehland
D.
, “Geometry-Induced Magnetoelectric Effect Enhancement and Noise Floor Reduction in Metglas/Piezofiber Sensors
,” Applied Physics Letters
101
, no. 9
(August 2012
): 092905, https://doi.org/10.1063/1.473790627.
Zhang
Y.
and Xu
X.
, “Predicting AsxSe1-x Glass Transition Onset Temperature
,” International Journal of Thermophysics
41
, no. 11
(September 2020
): 149, https://doi.org/10.1007/s10765-020-02734-428.
Zhang
Y.
and Xu
X.
, “Solubility Predictions through LSBoost for Supercritical Carbon Dioxide in Ionic Liquids
,” New Journal of Chemistry
44
, no. 47
(2020
): 20544
–20567
, https://doi.org/10.1039/D0NJ03868G29.
Zhang
Y.
and Xu
X.
, “Yttrium Barium Copper Oxide Superconducting Transition Temperature Modeling through Gaussian Process Regression
,” Computational Materials Science
179
(June 2020
): 109583, https://doi.org/10.1016/j.commatsci.2020.10958330.
Zhang
Y.
and Xu
X.
, “Predicting Doped MgB2 Superconductor Critical Temperature from Lattice Parameters Using Gaussian Process Regression
,” Physica C: Superconductivity and Its Applications
573
(June 2020
): 1353633, https://doi.org/10.1016/j.physc.2020.135363331.
Zhang
Y.
and Xu
X.
, “Curie Temperature Modeling of Magnetocaloric Lanthanum Manganites Using Gaussian Process Regression
,” Journal of Magnetism and Magnetic Materials
512
(October 2020
): 166998, https://doi.org/10.1016/j.jmmm.2020.16699832.
Zhang
Y.
and Xu
X.
, “Machine Learning the Magnetocaloric Effect in Manganites from Lattice Parameters
,” Applied Physics A
126
(April 2020
): 341, https://doi.org/10.1007/s00339-020-03503-833.
Zhang
Y.
and Xu
X.
, “Machine Learning the Magnetocaloric Effect in Manganites from Compositions and Structural Parameters
,” AIP Advances
10
, no. 3
(March 2020
): 035220, https://doi.org/10.1063/1.514424134.
Zhang
Y.
and Xu
X.
, “Predicting the Thermal Conductivity Enhancement of Nanofluids Using Computational Intelligence
,” Physics Letters A
384
, no. 20
(July 2020
): 126500, https://doi.org/10.1016/j.physleta.2020.12650035.
Zhang
Y.
and Xu
X.
, “Machine Learning Modeling of Lattice Constants for Half-Heusler Alloys
,” AIP Advances
10
, no. 4
(April 2020
): 045121, https://doi.org/10.1063/5.000244836.
Zhang
Y.
and Xu
X.
, “Machine Learning Optical Band Gaps of Doped-ZnO Films
,” Optik
217
(September 2020
): 164808, https://doi.org/10.1016/j.ijleo.2020.16480837.
Zhang
Y.
and Xu
X.
, “Relative Cooling Power Modeling of Lanthanum Manganites Using Gaussian Process Regression
,” RSC Advances
10
, no. 35
(2020
): 20646
–20653
, https://doi.org/10.1039/D0RA03031G38.
Zhang
Y.
and Xu
X.
, “Machine Learning Band Gaps of Doped-TiO2 Photocatalysts from Structural and Morphological Parameters
,” ACS Omega
5
, no. 25
(June 2020
): 15344
–15352
, https://doi.org/10.1021/acsomega.0c0143839.
Zhang
Y.
and Xu
X.
, “Machine Learning Lattice Constants for Cubic Perovskite A22+BB′O6 Compounds
,” CrystEngComm
22
, no. 38
(September 2020
): 6385
–6397
, https://doi.org/10.1039/D0CE00928H40.
Zhang
Y.
and Xu
X.
, “Machine Learning Lattice Constants for Cubic Perovskite ABX3 Compounds
,” ChemistrySelect
5
, no. 32
(August 2020
): 9999
–10009
, https://doi.org/10.1002/slct.20200253241.
Zhang
Y.
and Xu
X.
, “Lattice Misfit Predictions via the Gaussian Process Regression for Ni-Based Single Crystal Superalloys
,” Metals and Materials International
. Published ahead of print, October 26, 2020
, https://doi.org/10.1007/s12540-020-00883-742.
Zhang
Y.
and Xu
X.
, “Machine Learning Lattice Constants from Ionic Radii and Electronegativities for Cubic Perovskite A2XY6 Compounds
,” Physics and Chemistry of Minerals
47
(August 2020
): 39, https://doi.org/10.1007/s00269-020-01108-443.
Zhang
Y.
and Xu
X.
, “Transformation Temperature Predictions through Computational Intelligence for NiTi-Based Shape Memory Alloys
,” Shape Memory and Superelasticity
6
, no. 4
(2020
): 374
–386
, https://doi.org/10.1007/s40830-020-00303-044.
Zhang
Y.
and Xu
X.
, “Machine Learning Lattice Parameters of Monoclinic Double Perovskites
,” International Journal of Quantum Chemistry
. Published ahead of print, October 3, 2020
, https://doi.org/10.1002/qua.2648045.
Zhang
Y.
and Xu
X.
, “Fe-Based Superconducting Transition Temperature Modeling through Gaussian Process Regression
,” Journal of Low Temperature Physics
. 202
, nos. 1–2
(January 2021
): 205
–218
, https://doi.org/10.1007/s10909-020-02545-946.
Zhang
Y.
and Xu
X.
, “Machine Learning Decomposition Onset Temperature of Lubricant Additives
,” Journal of Materials Engineering and Performance
29
, no. 10
(October 2020
): 6605
–6616
, https://doi.org/10.1007/s11665-020-05146-547.
Zhang
Y.
and Xu
X.
, “Predicting Doped Fe-Based Superconductor Critical Temperature from Structural and Topological Parameters Using Machine Learning
,” International Journal of Materials Research
(2020
): N11975.48.
Zhang
Y.
and Xu
X.
, “Machine Learning Glass Transition Temperature of Polymers
,” Heliyon
6
, no. 10
(October 2020
): e05055, https://doi.org/10.1016/j.heliyon.2020.e0505549.
Zhang
Y.
and Xu
X.
, “Machine Learning F-Doped Bi(Pb)–Sr–Ca–Cu–O Superconducting Transition Temperature
,” Journal of Superconductivity and Novel Magnetism
34
, no. 1
(January 2021
): 63
–73
, https://doi.org/10.1007/s10948-020-05682-050.
Zhang
Y.
and Xu
X.
, “Machine Learning the Central Magnetic Flux Density of Superconducting Solenoids
,” Materials Technology
. Published ahead of print, October 13, 2020
, https://doi.org/10.1080/10667857.2020.183056751.
Zhang
Y.
and Xu
X.
, “Machine Learning Lattice Constants for Spinel Compounds
,” Chemical Physics Letters
760
(December 2020
): 137993, https://doi.org/10.1016/j.cplett.2020.13799352.
Zhang
Y.
and Xu
X.
, “Machine Learning Glass Transition Temperature of Styrenic Random Copolymers
,” Journal of Molecular Graphics and Modelling
103
(March 2021
): 107796, https://doi.org/10.1016/j.jmgm.2020.10779653.
Bull
A. D.
, “Convergence Rates of Efficient Global Optimization Algorithms
,” Journal of Machine Learning Research
12
(October 2011
): 2879
–2904
.54.
Snoek
J.
, Larochelle
H.
, and Adams
R. P.
, “Practical Bayesian Optimization of Machine Learning Algorithms
,” in 25th International Conference on Neural Information Processing Systems
(Red Hook, NY: Curran Associates, 2012
), 2951
–2959
.55.
Ibrahim
A.
, Mahmoud
E.
, Yamin
M.
, and Patibandla
V. C.
, “Experimental Study on Portland Cement Pervious Concrete Mechanical and Hydrological Properties
,” Construction and Building Materials
50
(January 2014
): 524
–529
, https://doi.org/10.1016/j.conbuildmat.2013.09.022
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.
