Abstract

Conventionally, isothermal calorimetry and ASTM C186 heat of hydration results are reported on the basis of heat per mass of cement (powder), with typical units being Joules per gram (of cement), for example. Given that it is the filling of porosity with hydration products that is chiefly responsible for strength development in cement-based materials, there might be merit in instead reporting these results in terms of the unit volume of (initial) water. This paper examines a database of well over 200 mortar mixtures to investigate the relationship between heat release and mortar cube compressive strength development. For reasonably low water-to-cementitious-materials ratios (w/cm) (w/cm < 0.43), a single universal straight line relationship with some scatter is obtained. Based on numerous experimental data sets and the accompanying theoretical computations, the effects of the w/cm, sand volume fraction, cement chemical composition, sulfate content, cement fineness, incorporation of a high range water reducing admixture, and curing conditions on this universal relationship are all considered. Fifty data points from the Cement and Concrete Reference Laboratory proficiency sample program were analyzed in order to develop a linear relationship between ASTM C109 mortar cube compressive strengths and ASTM C186 heats of hydration at 7 d and 28 d. The application of this relationship for virtual testing is also evaluated. In this case, computer simulations would be employed to predict the heat of hydration versus time for a particular cement, and the developed equations would be employed to convert this heat release to a strength prediction at the age(s) of interest. In general, it appears that these relationships can be used to predict mortar cube compressive strengths based on measured heats of hydration, within about ±10 % of the experimentally measured strengths. A preliminary analysis of a single dataset for concretes with and without limestone replacement for cement indicates that the linear relationship between strength and heat release likely holds for concretes as well as for mortars.

Issue Section:
Research Papers
Keywords:
compressive strength, heat release, hydration, isothermal calorimetry, mortar, virtual testing

References

1.
Mindess
,
S.
 and
Young
,
J. F.
,
Concrete
,
Prentice-Hall
,
Englewood Cliffs, NJ
,
1981
.
2.
Zelic
,
J.
,
Rusic
,
D.
, and
Krstulovic
,
R.
, “
A Mathematical Model for Prediction of Compressive Strength in Cement-Silica Fume Blends
,”
Cem. Concr. Res.
, Vol.
34
,
2004
, pp.
2319
–
2328
. https://doi.org/10.1016/j.cemconres.2004.04.015
Google Scholar
Crossref
Search ADS
 
3.
Knudsen
,
T.
, “
The Dispersion Model for Hydration of Portland Cement: I. General Concepts
,”
Cem. Concr. Res.
, Vol.
14
,
1984
, pp.
622
–
630
. https://doi.org/10.1016/0008-8846(84)90024-3
Google Scholar
Crossref
Search ADS
 
4.
Ioan
,
M.
,
Radu
,
L.
, and
Mandoiu
,
C.
, “
Software-Enhanced Method for Rapid Determination of the Early Heat of Hydration of Cement CEM II/A and B-S to Predict the 28-day Compressive Strength
,”
Proceedings of the the 1st International Proficiency Testing Conference
,
Sinaia, Romania
, Oct 11–13, CEPROCIM S.A.,
2007
, pp.
355
–
362
.
5.
Bentz
,
D. P.
, “
Blending Different Fineness Cements to Engineer the Properties of Cement-Based Materials
,”
Mag. Concrete Res.
, Vol.
62
(
5
),
2010
, pp.
327
–
338
. https://doi.org/10.1680/macr.2008.62.5.327
Google Scholar
Crossref
Search ADS
 
6.
Bentz
,
D. P.
,
Peltz
,
M. A.
, and
Winpigler
,
J.
, “
Early-Age Properties of Cement-Based Materials: II. Influence of Water-to-Cement Ratio
,”
J. Mater. Civ. Eng.
, Vol.
21
(
9
),
2009
, pp.
512
–
517
. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:9(512)
Google Scholar
Crossref
Search ADS
 
7.
Bentz
,
D. P.
,
Ferraris
,
C. F.
, and
Filliben
,
J. J.
, “
Optimization of Particle Sizes in High Volume Fly Ash Blended Cements
,”
NISTIR 7763
,
U.S. Department of Commerce
,
Washington, D.C.
,
2011
.
8.
Bentz
,
D. P.
,
Sato
,
T.
,
de la Varga
,
I.
, and
Weiss
,
W. J.
, “
Fine Limestone Additions to Regulate Setting in High Volume Fly Ash Mixtures
,”
Cem. Concr. Compos.
, Vol.
34
(
1
),
2012
, pp.
11
–
17
. https://doi.org/10.1016/j.cemconcomp.2011.09.004
Google Scholar
Crossref
Search ADS
 
9.
Bentz
,
D. P.
,
Ferraris
,
C. F.
,
De la Varga
,
I.
,
Peltz
,
M. A.
, and
Winpigler
,
J.
, “
Mixture Proportioning Options for Improving High Volume Fly Ash Concretes
,”
International Journal of Pavement Research and Technology
, Vol.
3
(
5
),
2010
, pp.
234
–
240
.
10.
De la Varga
,
I.
,
Castro
,
J.
,
Bentz
,
D.
, and
Weiss
,
J.
, “
Application of Internal Curing for Mixtures Containing High Volumes of Fly Ash
” (accepted by Cement and Concrete Composites,
2012
).
11.
De la Varga
,
I.
,
2013
, “
Increased Use of Fly Ash in Concrete Structures
,” Ph.D. thesis,
Purdue University
, West Lafayette, IN (thesis to be published in 2013).
12.
Barrett
,
T. J.
, and
Weiss
,
W. J.
,
Performance of More Sustainable Cements that Include Interground Limestone Additions of Up to 15 %
,
Joint Transportation Research Program
,
Indiana Department of Transportation Indianapolis, IN
,
2012
.
13.
Bentz
,
D. P.
,
Duran-Herrera
,
A.
, and
Galvez-Moreno
,
D.
, “
Comparison of ASTM C311 Strength Activity Index Testing vs. Testing Based on Constant Volumetric Proportions
,”
J. ASTM Int.
, Vol.
9
(
1
),
2012
.
14.
CCRL Proficiency Sample Reports
, http://www.ccrl.us/Psp/Reports.htm (Last accessed 8 Sept
2011
).
15.
Bentz
,
D. P.
, “
Verification, Validation, and Variability of Virtual Standards
,”
12th International Congress on the Chemistry of Cement
(CD-ROM),
Montreal, Canada
, National Research Council of Canada,
2007
.
16.
ASTM C109/C109M-11
,
2011
, “
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
,”
Annual Book of ASTM Standards
, Vol.
04.01
,
ASTM International
,
West Conshohocken, PA
.
17.
ASTM C186-05
,
2005
, “
Standard Test Method for Heat of Hydration of Hydraulic Cement
,”
Annual Book of ASTM Standards
, Vol.
04.01
,
ASTM International
,
West Conshohocken, PA
.
18.
Bentz
,
D. P.
, “
Cement Hydration: Building Bridges and Dams at the Microstructure Level
,”
Mater. Struct.
, Vol.
40
(
4
),
2007
, pp.
397
–
404
. https://doi.org/10.1617/s11527-006-9147-3
Google Scholar
Crossref
Search ADS
 
19.
Bentz
,
D. P.
, “
Three-Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development
,”
J. Am. Ceram. Soc.
, Vol.
80
(
1
),
1997
, pp.
3
–
21
. https://doi.org/10.1111/j.1151-2916.1997.tb02785.x
Google Scholar
Crossref
Search ADS
 
20.
Lerch
,
W.
, “
The Influence of Gypsum on the Heat of Hydration and Properties of Portland Cement Pastes
,”
ASTM Bull.
, Vol.
12
,
1946
, pp.
1
–
41
.
21.
Bentz
,
D. P.
 and
Aitcin
,
P.-C.
, “
The Hidden Meaning of Water-to-Cement Ratio
,”
Concr. Int.
, Vol.
30
(
5
),
2008
, pp.
51
–
54
.
22.
Bentz
,
D. P.
,
Stutzman
,
P. E.
,
Sakulich
,
A. R.
, and
Weiss
,
W. J.
, “
Analysis of Early-Age Bridge Deck Cracking in Nevada and Wyoming
,”
NISTIR 7841
,
U.S. Department of Commerce
,
Washington, D.C.
,
2012
.
23.
Sandberg
,
P. J.
 and
Roberts
,
L. R.
, “
Cement-Admixture Interactions Related to Aluminate Control
,”
J. ASTM Int.
, Vol.
2
(
6
),
2005
, pp.
1
–
14
. https://doi.org/10.1520/JAI12938
Google Scholar
Crossref
Search ADS
 
24.
ASTM C311-11a
,
2011
, “
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
,”
Annual Book of ASTM Standards
, Vol.
04.02
,
ASTM International
,
West Conshohocken, PA
.
25.
Tennis
,
P. D.
,
Thomas
,
M. D. A.
, and
Weiss
,
W. J.
, “
State-of-the-Art Report on Use of Limestone in Cement at Levels of Up to 15 %
,”
PCA R&D Serial No. SN3148
,
Portland Cement Association
,
Skokie, IL
,
2011
.
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.