Venous ulcers are deep wounds that are located predominantly on the lower leg. They are prone to infection and once healed have a high probability of recurrence. Currently, there are no effective measures to predict and prevent venous ulcers from formation. Hence, the goal of this work was to develop a Windkessel-based model that can be used to identify hemodynamic parameters that change between healthy individuals and those with wounds. Once identified, these parameters have the potential to be used as indicators of when internal conditions change, putting the patient at higher risk for wound formation. In order to achieve this goal, blood flow responses in lower legs were measured experimentally by a laser Doppler perfusion monitor (LDPM) and simulated with a modeling approach. A circuit model was developed on the basis of the Windkessel theory. The hemodynamic parameters were extracted for three groups: legs with ulcers (“wounded”), legs without ulcers but from ulcer patients (“nonwounded”), and legs without vascular disease (“healthy”). The model was executed by two independent operators, and both operators reported significant differences between wounded and healthy legs in localized vascular resistance and compliance. The model successfully replicated the experimental blood flow profile. The global and local vascular resistances and compliance parameters rendered quantifiable differences between a population with venous ulcers and healthy individuals. This work supports that the Windkessel modeling approach has the potential to determine patient specific parameters that can be used to identify when conditions change making venous ulcer formation more likely.
Skip Nav Destination
Article navigation
March 2018
Research-Article
A Potential Tool for the Study of Venous Ulcers: Blood Flow Responses to Load
Wu Pan,
Wu Pan
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: panwu@egr.msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: panwu@egr.msu.edu
Search for other works by this author on:
Joshua P. Drost,
Joshua P. Drost
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: drostjos@msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: drostjos@msu.edu
Search for other works by this author on:
Sara Roccabianca,
Sara Roccabianca
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: roccabis@egr.msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: roccabis@egr.msu.edu
Search for other works by this author on:
Seungik Baek,
Seungik Baek
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: sbaek@egr.msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: sbaek@egr.msu.edu
Search for other works by this author on:
Tamara Reid Bush
Tamara Reid Bush
Fellow ASME
Chair of the Dynamics,
Design and Rehabilitation (DDR) Committee,
Bioengineering Technical Division,
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: reidtama@msu.edu
Chair of the Dynamics,
Design and Rehabilitation (DDR) Committee,
Bioengineering Technical Division,
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: reidtama@msu.edu
Search for other works by this author on:
Wu Pan
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: panwu@egr.msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: panwu@egr.msu.edu
Joshua P. Drost
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: drostjos@msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: drostjos@msu.edu
Sara Roccabianca
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: roccabis@egr.msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: roccabis@egr.msu.edu
Seungik Baek
Fellow ASME
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: sbaek@egr.msu.edu
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: sbaek@egr.msu.edu
Tamara Reid Bush
Fellow ASME
Chair of the Dynamics,
Design and Rehabilitation (DDR) Committee,
Bioengineering Technical Division,
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: reidtama@msu.edu
Chair of the Dynamics,
Design and Rehabilitation (DDR) Committee,
Bioengineering Technical Division,
Department of Mechanical Engineering,
Michigan State University,
2555 Engineering Building,
East Lansing, MI 48824-1226
e-mail: reidtama@msu.edu
1Corresponding author.
Manuscript received December 20, 2016; final manuscript received December 11, 2017; published online January 18, 2018. Assoc. Editor: Jonathan Vande Geest.
J Biomech Eng. Mar 2018, 140(3): 031009 (7 pages)
Published Online: January 18, 2018
Article history
Received:
December 20, 2016
Revised:
December 11, 2017
Citation
Pan, W., Drost, J. P., Roccabianca, S., Baek, S., and Bush, T. R. (January 18, 2018). "A Potential Tool for the Study of Venous Ulcers: Blood Flow Responses to Load." ASME. J Biomech Eng. March 2018; 140(3): 031009. https://doi.org/10.1115/1.4038742
Download citation file:
Get Email Alerts
Cited By
In Memoriam: Shmuel Einav, 1942–2022
J Biomech Eng (August 2022)
A Review of Head Injury Metrics Used in Automotive Safety and Sports Protective Equipment
J Biomech Eng (November 2022)
Related Articles
A First-Order Mechanical Device to Model Traumatized Craniovascular Biodynamics
J. Med. Devices (March,2007)
Computational Fluid Dynamics Simulations of Blood Flow Through an Injured Arteriole
J. Med. Devices (September,2016)
Assessment of Energy Requirement for the Retinal Arterial Network in Normal and Hypertensive Subjects
J Biomech Eng (January,2012)
Computational Biomechanics of Human Red Blood Cells in Hematological Disorders
J Biomech Eng (February,2017)
Related Proceedings Papers
Related Chapters
Introduction
Mechanical Blood Trauma in Circulatory-Assist Devices
Concluding remarks
Mechanical Blood Trauma in Circulatory-Assist Devices
Vibration Analysis of the Seated Human Body in Vertical Direction
International Conference on Computer Technology and Development, 3rd (ICCTD 2011)