Numerical simulations that incorporate a biochemomechanical model for the contractility of the cytoskeleton have been used to rationalize the following observations. Uniaxial cyclic stretching of cells causes stress fibers to align perpendicular to the stretch direction, with degree of alignment dependent on the stretch strain magnitude, as well as the frequency and the transverse contraction of the substrate. Conversely, equibiaxial cyclic stretching induces a uniform distribution of stress fiber orientations. Demonstrations that the model successfully predicts the alignments experimentally found are followed by a parameter study to investigate the influence of a range of key variables including the stretch magnitude, the intrinsic rate sensitivity of the stress fibers, the straining frequency, and the transverse contraction of the substrate. The primary predictions are as follows. The rate sensitivity has a strong influence on alignment, equivalent to that attained by a few percent of additional stretch. The fiber alignment increases with increasing cycling frequency. Transverse contraction of the substrate causes the stress fibers to organize into two symmetrical orientations with respect to the primary stretch direction.
Skip Nav Destination
e-mail: rmcm@engr.ucsb.edu
Article navigation
June 2008
Research Papers
Analysis and Interpretation of Stress Fiber Organization in Cells Subject to Cyclic Stretch
Zhensong Wei,
Zhensong Wei
Mechanical Engineering Department and Materials Department,
University of California
, Santa Barbara, CA 93106
Search for other works by this author on:
Vikram S. Deshpande,
Vikram S. Deshpande
Department of Engineering,
University of Cambridge
, Trumpington Street, Cambridge, CB2 1PZ, UK
Search for other works by this author on:
Robert M. McMeeking,
Robert M. McMeeking
Mechanical Engineering Department and Materials Department,
e-mail: rmcm@engr.ucsb.edu
University of California
, Santa Barbara, CA 93106
Search for other works by this author on:
Anthony G. Evans
Anthony G. Evans
Mechanical Engineering Department and Materials Department,
University of California
, Santa Barbara, CA 93106
Search for other works by this author on:
Zhensong Wei
Mechanical Engineering Department and Materials Department,
University of California
, Santa Barbara, CA 93106
Vikram S. Deshpande
Department of Engineering,
University of Cambridge
, Trumpington Street, Cambridge, CB2 1PZ, UK
Robert M. McMeeking
Mechanical Engineering Department and Materials Department,
University of California
, Santa Barbara, CA 93106e-mail: rmcm@engr.ucsb.edu
Anthony G. Evans
Mechanical Engineering Department and Materials Department,
University of California
, Santa Barbara, CA 93106J Biomech Eng. Jun 2008, 130(3): 031009 (9 pages)
Published Online: April 28, 2008
Article history
Received:
March 9, 2007
Revised:
July 30, 2007
Published:
April 28, 2008
Citation
Wei, Z., Deshpande, V. S., McMeeking, R. M., and Evans, A. G. (April 28, 2008). "Analysis and Interpretation of Stress Fiber Organization in Cells Subject to Cyclic Stretch." ASME. J Biomech Eng. June 2008; 130(3): 031009. https://doi.org/10.1115/1.2907745
Download citation file:
Get Email Alerts
Related Articles
The Role of Mass Balance Equations in Growth Mechanics Illustrated in Surface and Volume Dissolutions
J Biomech Eng (January,2011)
On the Determination of the Angular Orientation of a Vertebra
J Biomech Eng (February,2002)
Design of an Endoreactor for the Cultivation of a Joint-Like-Structure
J. Med. Devices (June,2009)
Development of a Force-Driven Distractor for Distraction Osteogenesis
J. Med. Devices (December,2011)
Related Proceedings Papers
Related Chapters
Novel and Efficient Mathematical and Computational Methods for the Analysis and Architecting of Ultralight Cellular Materials and their Macrostructural Responses
Advances in Computers and Information in Engineering Research, Volume 2
On Post-Compensating Fiber Nonlinearity for Coherent Optical OFDM Network Transmissions
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Stiffening Mechanisms
Introduction to Plastics Engineering