Mandibular condylar cartilage plays a crucial role in temporomandibular joint (TMJ) function, which includes facilitating articulation with the temporomandibular joint disc and reducing loads on the underlying bone. The cartilage experiences considerable tensile forces due to direct compression and shear. However, only scarce information is available about its tensile properties. The present study aims to quantify the biomechanical characteristics of the mandibular condylar cartilage to aid future three-dimensional finite element modeling and tissue engineering studies. Porcine condylar cartilage was tested under uniaxial tension in two directions, anteroposterior and mediolateral, with three regions per direction. Stress relaxation behavior was modeled using the Kelvin model and a second-order generalized Kelvin model, and collagen fiber orientation was determined by polarized light microscopy. The stress relaxation behavior of the tissue was biexponential in nature. The tissue exhibited greater stiffness in the anteroposterior direction than in the mediolateral direction as reflected by higher Young’s (2.4 times), instantaneous (1.9 times), and relaxed (1.9 times) moduli. No significant differences were observed among the regional properties in either direction. The predominantly anteroposterior macroscopic fiber orientation in the fibrous zone of condylar cartilage correlated well with the biomechanical findings. The condylar cartilage appears to be less stiff and less anisotropic under tension than the anatomically and functionally related TMJ disc. The anisotropy of the condylar cartilage, as evidenced by tensile behavior and collagen fiber orientation, suggests that the shear environment of the TMJ exposes the condylar cartilage to predominantly but not exclusively anteroposterior loading.
Skip Nav Destination
e-mail: detamore@ku.edu
Article navigation
February 2008
Research Papers
Tensile Properties of the Mandibular Condylar Cartilage
M. Singh,
M. Singh
Department of Chemical and Petroleum Engineering,
University of Kansas
, Lawrence, KS 66045
Search for other works by this author on:
M. S. Detamore, Ph.D.
M. S. Detamore, Ph.D.
Department of Chemical and Petroleum Engineering,
e-mail: detamore@ku.edu
University of Kansas
, Lawrence, KS 66045
Search for other works by this author on:
M. Singh
Department of Chemical and Petroleum Engineering,
University of Kansas
, Lawrence, KS 66045
M. S. Detamore, Ph.D.
Department of Chemical and Petroleum Engineering,
University of Kansas
, Lawrence, KS 66045e-mail: detamore@ku.edu
J Biomech Eng. Feb 2008, 130(1): 011009 (7 pages)
Published Online: February 7, 2008
Article history
Received:
January 29, 2007
Revised:
June 8, 2007
Published:
February 7, 2008
Citation
Singh, M., and Detamore, M. S. (February 7, 2008). "Tensile Properties of the Mandibular Condylar Cartilage." ASME. J Biomech Eng. February 2008; 130(1): 011009. https://doi.org/10.1115/1.2838062
Download citation file:
Get Email Alerts
Optimal Control Formulation for Manual Wheelchair Locomotion Simulations: Influence of Anteroposterior Stability
J Biomech Eng (November 2023)
Related Articles
The Role of Flow-Independent Viscoelasticity in the Biphasic Tensile and Compressive Responses of Articular Cartilage
J Biomech Eng (October,2001)
Design of an Endoreactor for the Cultivation of a Joint-Like-Structure
J. Med. Devices (June,2009)
Direct Measurement of Nonuniform Large Deformations in Soft Tissues During Uniaxial Extension
J Biomech Eng (June,2009)
Harnessing Biomechanics to Develop Cartilage Regeneration Strategies
J Biomech Eng (February,2015)
Related Chapters
Experimental Research on Flexural Tensile Properties of Layer Steel Fiber Reinforced Rubber Concrete
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Research on Strengthening Mechanism of Plant Root in Slope Protection
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Defining Joint Quality Using Weld Attributes
Ultrasonic Welding of Lithium-Ion Batteries