The mechanical properties of cancellous bone and the biological response of the tissue to mechanical loading are related to deformation and strain in the trabeculae during function. Due to the small size of trabeculae, their motion is difficult to measure. To avoid the need to measure trabecular motions during loading the finite element method has been used to estimate trabecular level mechanical deformation. This analytical approach has been empirically successful in that the analytical models are solvable and their results correlate with the macroscopically measured stiffness and strength of bones. The present work is a direct comparison of finite element predictions to measurements of the deformation and strain at near trabecular level. Using the method of digital volume correlation, we measured the deformation and calculated the strain at a resolution approaching the trabecular level for cancellous bone specimens loaded in uniaxial compression. Smoothed results from linearly elastic finite element models of the same mechanical tests were correlated to the empirical three-dimensional (3D) deformation in the direction of loading with a coefficient of determination as high as 97% and a slope of the prediction near one. However, real deformations in the directions perpendicular to the loading direction were not as well predicted by the analytical models. Our results show, that the finite element modeling of the internal deformation and strain in cancellous bone can be accurate in one direction but that this does not ensure accuracy for all deformations and strains.
Issue Section:
Bone/Orthopedics
1.
Silva
, M. J.
, Keaveny
, T. M.
, and Hayes
, W. C.
1997, “Load Sharing Between The Shell And Centrum In The Lumbar Vertebral Body
,” Spine
0362-2436, 22
(2
): pp. 140
–150
.2.
Silva
, M. J.
, Keaveny
, T. M.
, and Hayes
, W. C.
, 1998, “Computed Tomography-Based Finite Element Analysis Predicts Failure Loads and Fracture Patterns for Vertebral Sections
,” J. Orthop. Res.
0736-0266, 16
(3
), pp. 300
–308
.3.
Mizrahi
, J.
, et al., 1993, “Finite-Element Stress Analysis of the Normal and Osteoporotic Lumbar Vertebral Body
,” Spine
0362-2436, 18
(14
), pp. 2088
–2096
.4.
Niebur
, G. L.
, et al., 2000, “High-Resolution Finite Element Models With Tissue Strength Asymmetry Accurately Predict Failure of Trabecular Bone
,” J. Biomech.
0021-9290, 33
(12
), pp. 1575
–1583
.5.
Liebschner
, M. A.
, et al., 2003, “Finite Element Modeling of the Human Thoracolumbar Spine
,” Spine
0362-2436, 28
(6
), pp. 559
–565
.6.
Cody
, D. D.
, et al., 1999, “Femoral Strength is Better Predicted by Finite Element Models Than QCT and DXA
,” J. Biomech.
0021-9290, 32
(10
), pp. 1013
–1020
.7.
Cody
, D. D.
, et al., 2000, “Femoral Structure and Stiffness in Patients With Femoral Neck Fracture
,” J. Orthop. Res.
0736-0266, 18
(3
), pp. 443
–448
.8.
Cody
, D. D.
, et al., 2000, “Short Term in Vivo Precision of Proximal Femoral Finite Element Modeling
,” Ann. Biomed. Eng.
0090-6964, 28
(4
), pp. 408
–414
.9.
Crawford
, R. P.
, Cann
, C. E.
, and Keaveny
, T. M.
, 2003, “Finite Element Models Predict in Vitro Vertebral Body Compressive Strength Better Than Quantitative Computed Tomography
,” Bone (N.Y.)
8756-3282, 33
(4
), pp. 744
–750
.10.
Crawford
, R. P.
, Rosenberg
, W. S.
, and Keaveny
, T. M.
, 2003, “Quantitative Computed Tomography-Based Finite Element Models of the Human Lumbar Vertebral Body: Effect of Element Size on Stiffness, Damage, and Fracture Strength Predictions
,” J. Biomech. Eng.
0148-0731, 125
(4
), pp. 434
–438
.11.
Fyhrie
, D. P.
, et al., 2000, “Shear Stress Distribution in the Trabeculae of Human Vertebral Bone
,” Ann. Biomed. Eng.
0090-6964, 28
(10
), pp. 1194
–1199
.12.
Hou
, F. J.
, et al., 1998, “Human Vertebral Body Apparent and Hard Tissue Stiffness
,” J. Biomech.
0021-9290, 31
(11
), p. 1009
–1015
.13.
Jaasma
, M. J.
, et al., 2002, “Biomechanical Effects of Intraspecimen Variations in Tissue Modulus for Trabecular Bone
,” J. Biomech.
0021-9290, 35
(2
), pp. 237
–246
.14.
Van Rietbergen
, B.
, et al., 1999, “Tissue Stresses and Strain in Trabeculae of a Canine Proximal Femur can be Quantified From Computer Reconstructions
,” J. Biomech.
0021-9290, 32
(4
), pp. 443
–451
.15.
van Rietbergen
, B.
, 2001, “Micro-FE Analyses of Bone: State of the art
,” Adv. Exp. Med. Biol.
0065-2598, 496
, pp. 21
–30
.16.
van Rietbergen
, B.
, et al., 2002, “High-Resolution MRI and Micro-FE for the Evaluation of Changes in Bone Mechanical Properties During Longitudinal Clinical Trials: Application to Calcaneal Bone in Postmenopausal Women After one Year of Idoxifene Treatment
,” Clin. Biomech. (Bristol, Avon)
0268-0033, 17
(2
), pp. 81
–88
.17.
Yeni
, Y. N.
and Fyhrie
, D. P.
, 2001, “Finite Element Calculated Uniaxial Apparent Stiffness is a Consistent Predictor of Uniaxial Apparent Strength in Human Vertebral Cancellous Bone Tested With Different Boundary Conditions
,” J. Biomech.
0021-9290, 34
(12
), pp. 1649
–1654
.18.
Yeni
, Y. N.
, et al., 2003, “Trabecular Shear Stresses Predict in Vivo Linear Microcrack Density but not Diffuse Damage in Human Vertebral Cancellous Bone
,” Ann. Biomed. Eng.
0090-6964, 31
(7
), pp. 726
–732
.19.
Ulrich
, D.
, et al., 1999, “Load Transfer Analysis of the Distal Radius From in-Vivo High-Resolution CT-Imaging
,” J. Biomech.
0021-9290, 32
(8
), pp. 821
–828
.20.
Huiskes
, R.
, 1982, “On the Modelling of Long Bones in Structural Analyses
,” J. Biomech.
0021-9290, 15
(1
), pp. 65
–69
.21.
Guo
, X. E.
, et al., 2002, “Quantification of a rat Tail Vertebra Model for Trabecular Bone Adaptation Studies
,” J. Biomech.
0021-9290, 35
(3
), pp. 363
–368
.22.
Akhter
, M. P.
, et al., 1992, “Characterization of in Vivo Strain in the rat Tibia During External Application of a Four-Point Bending Load
,” J. Biomech.
0021-9290, 25
(10
), pp. 1241
–1246
.23.
Bay
, B. K.
, 1995, “Texture Correlation: A Method for the Measurement of Detailed Strain Distributions Within Trabecular Bone
,” J. Orthop. Res.
0736-0266, 13
, pp. 258
–267
.24.
Bay
, B. K.
, et al., 1999, “Digital Volume Correlation: Three-Dimensional Strain Mapping Using X-Ray Tomography
,” Exp. Mech.
0014-4851,” 39
(3
), pp. 217
–226
.25.
Smith
, T.
, Bay
, B.
, and Rashid
, M.
, 2002, “Digital Volume Correlation Including Rotational Degrees of Freedom During Minimization
,” Exp. Mech.
0014-4851, 42
(3
), pp. 272
–278
.26.
Odgaard
, A.
, Hvid
, I.
, and Linde
, F.
, 1989, “Compressive Axial Strain Distributions in Cancellous Bone Specimens
,” J. Biomech.
0021-9290, 22
(8-9
), pp. 829
–835
.27.
Nicolella
, D. P.
, et al., 2001, “Machine Vision Photogrammetry: a Technique for Measurement of Microstructural Strain in Cortical Bone
,” J. Biomech.
0021-9290, 34
(1
), pp. 135
–139
.28.
Reimann
, D. A.
, et al., 1997, “A Cone Beam Computed Tomography System for True 3D Imaging of Specimens
,” Appl. Radiat. Isot.
0969-8043, 48
(10-12
), pp. 1433
–1436
.29.
Luenberger
, D. G.
, 1973, Introduction to Linear and Nonlinear Programming
, Addison-Wesley
, Reading.30.
Malvern
, L. E.
, 1969, Introduction to the Mechanics of a Continuous Medium
, Prentice-Hall, Inc.
, Englewood Cliffs.31.
Niebur
. G. L.
, et al., 1999, “Convergence Behavior of High-Resolution Finite Element Models of Trabecular Bone
,” J. Biomech. Eng.
0148-0731, 121
(6
), pp. 629
–635
.32.
Charras
, G. T.
and Guldberg
, R. E.
, 2000, “Improving the Local Solution Accuracy of Large-Scale Digital Image-Based Finite Element Analyses
,” J. Biomech.
0021-9290, 33
(2
), pp. 255
–259
.33.
Guldberg
, R. E.
, Hollister
, S. J.
, and Charras
, G. T.
, 1998, “The Accuracy of Digital Image-Based Finite Element Models
,” J. Biomech. Eng.
0148-0731, 120
(2
), pp. 289
–295
.34.
Rho
, J. Y.
, et al., 2002, “Microstructural Elasticity and Regional Heterogeneity in Human Femoral Bone of Various Ages Examined by Nano-Indentation
,” J. Biomech.
0021-9290, 35
(2
), pp. 189
–198
.35.
Rho
, J. Y.
, Kuhn-Spearing
, L.
, and Zioupos
, P.
, 1998, “Mechanical Properties and the Hierarchical Structure of Bone
,” Med. Eng. Phys.
1350-4533, 20
(2
), pp. 92
–102
.Copyright © 2006
by American Society of Mechanical Engineers
You do not currently have access to this content.
